7A26: Difference between revisions

No change in size ,  13 October 2023
m
no edit summary
No edit summary
mNo edit summary
Line 38: Line 38:
The pins of the attenuator modules are connected to conductive traces on the ceramic substrate inside by low-temperature soldering, which can go bad.
The pins of the attenuator modules are connected to conductive traces on the ceramic substrate inside by low-temperature soldering, which can go bad.
Re-seating the module can temporarily restore the internal contact but will usually not fix the problem permanently.
Re-seating the module can temporarily restore the internal contact but will usually not fix the problem permanently.
Repair is possible by opening the click-locked lid and carefully re-soldering. (see [[307-1012-00]])
Repair is possible by opening the click-locked lid and carefully re-soldering (see [[307-1012-00]]).


==Links==
==Links==