7D14: Difference between revisions

Revision as of 11:04, 24 June 2014

{{{manufacturer}}} Special Function
525 MHz frequency counter 7D14 front view (manual) Compatible with [[7000-series scopes]] Produced from {{{introduced}}} to {{{discontinued}}} Manuals Tektronix 7D14 Service (OCR, PDF) (All manuals in PDF format unless noted otherwise) [[Category:Introduced in {{{introduced}}}]]

Manuals – Specifications – Links – Pictures

The Tektronix 7D14 is a 525 MHz frequency counter plug-in for 7000 series mainframes.

It uses the mainframe's readout system to display an eight-digit count on the CRT. Modes include frequency, frequency ratio and events count using manual or external gate.

When installed in a horizontal compartment, it can count the trigger pickoff from a vertical amplifier unit. This allows simultaneous viewing and counting of a signal in four-bay mainframes.

In a vertical compartment, the trigger signal (i.e. the "shaped" input) can be displayed as the module's Y output.

Specifications

Key Specifications

Frequency	525 MHz (5 MHz bandwidth limiting switch available)
Sensitivity	100 mV to 10 V
Input Impedance	50 Ω or 1 MΩ // 20 pF on external input, 1.5 Div internal when set to "Trig Source"
Gate time	1 ms to 10 s
Display time	0.1 s to 5 s or infinite
Features	Gate monitor output / Ext Gate input (BSM) 1 MHz reference monitor output / Ext Ref input (BSM)

Links

Pictures

please add

@@ Line 12: / Line 12: @@
 The '''Tektronix 7D14''' is a 525 MHz frequency counter plug-in for [[7000-series scopes|7000 series mainframes]].
+It uses the mainframe's readout system to display an eight-digit count on the CRT.
+Modes include frequency, frequency ratio and events count using manual or external gate.
+When installed in a horizontal compartment, it can count the trigger pickoff from a vertical amplifier unit.  This allows simultaneous viewing and counting of a signal in four-bay mainframes.
+In a vertical compartment, the trigger signal (i.e. the "shaped" input) can be displayed as the module's Y output.
 ==Specifications==
-[[Category:Specifications needed]] ''please add''
+{{BeginSpecs}}
+{{Spec | Frequency | 525 MHz (5 MHz bandwidth limiting switch available) }}
+{{Spec | Sensitivity | 100 mV to 10 V }}
+{{Spec | Input Impedance | 50 Ω or 1 MΩ // 20 pF on external input, 1.5 Div internal when set to "Trig Source"}}
+{{Spec | Gate time | 1 ms to 10 s }}
+{{Spec | Display time | 0.1 s to 5 s or infinite }}
+{{Spec | Features |
+* Gate monitor output / Ext Gate input ([[BSM]])
+* 1 MHz reference monitor output / Ext Ref input (BSM)
+}}
+{{EndSpecs}}
 ==Links==