77
edits
AWG2005: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The '''Tektronix AWG2005''' is an arbitrary waveform generator. | The '''Tektronix AWG2005''' is an arbitrary waveform generator. | ||
Specifications: | |||
Range: .01Hz to 20MHz 4 Digit resolution (Std.) Waveform generator editing Clock (Option 05) | |||
Memory: 64K x 12 bits Waveform can position 256 data point boundary in the waveform memory, 256 Waveform maximum. | |||
Catalog Memory 4 Mb | |||
DA Converter Resolution: 12 bits | |||
Internal Storage: NVRAM 512K | |||
Internal Disc Drive:3.5 Inch Floppy Drive | |||
Internal Diagnostics and Calibration | |||
Optional FPP (Option 09) | |||
Sweep Types: Linear, Log, Arbitrary | |||
Sweep Modes: Continuous, Triggered, Gated | |||
Output Range: 0.05 to 10V pp | |||
Offset Range: -5.0 to 5.0V | |||
Current Source: -200mA to 200mA | |||
Output rated into 50Ohm Load | |||
Output Impedance: 50 Ohm | |||
Transfer over GPIB or RS-232 Interfaces | |||
Direct Transfers Available from TDS Series, 2200 Series, | |||
2400 Series, 11000 Series, AFG 2020 or any AWG20XX Series Instrument | |||
2 Channel (Std) (4 Channels - Option 02) | |||
Std: Weight: 10.7 kg (23.5 Lbs.) | |||
Height: 160mm (6.4 in) | |||
Width: 360mm (14.3 in) Includes Handle | |||
Length A: 490 mm (19.25 in) With Front Cover | |||
Length B: 560 mm (22.2 in) Handle Extended | |||
CRT: Monochrome 132mm (5.2 in) horizontally by 99mm (3.9 in) vertically | |||
CRT Resolution:640H x 480V (Pixels) | |||
Backup Battery Type: Li 3 V, 650mAH Soldered to the Back plane connector board. Holds data in the NVRAM when AC power is off. | |||
Rated Voltage 100VAC to 240VAC Continuous Range CAT II | |||
Range (Low): 90 - 127 VAC 48Hz to 440Hz | |||
Range (High): 90 - 250 VAC 48Hz to 63 Hz | |||
Power Consumption (MAX): 300W | |||
Current (MAX): 4A | |||
Operating Temp +10C to +40C | |||
Non- Operating: -20C to +60C | |||
Max Operating Altitude 4.5km (15000 feet) | |||
Cooling: Forced Air 12V Fan | |||
Clearance A: 76mm (3 Inches) Top | |||
Clearance B: 150mm (6 Inches) Sides | |||
Clearance C: 76mm (3 Inches) Rear | |||
Reference Oscillator: 12.6 MHz | |||
Function Generator: SINE/TRIANGLE/SQUARE/RAMP and PULSE | |||
Range: 1Hz to 200kHz | |||
Amplitude: Variable from 50mV to 10V in 1mV increments | |||
Offset: Variable +/-5V in 5mV increments | |||
Polarity: Normal/Inverted | |||
Duty (Pulse Only): 0% to 100% in 1% Increments | |||
Operating Mode: Continuous Mode | |||
Auxiliary Output Marker: 2V into 50Ohm Square Pulse | |||
==Manuals== | ==Manuals== | ||