AWG2005

The Tektronix AWG2005 is an arbitrary waveform generator.

Key Specifications

Frequency	Point clock 0.01 Hz to 20 MHz, 4 digit resolution (Opt.05: 7 digits)
Channels	2 outputs (Opt.02: 4 outputs), 12 bit resolution; auxiliary marker output (2 V pulse into 50 Ω) per channel; low pass filters 0.5/1/2/5 MHz
Functions	Sine, triangle, Square, Ramp, Pulse and Arbitrary; min. 16 points
Output	Range: 50 mVp-pto 10 Vp-p (1 mV increments) into 50 Ω (source impedance 50 Ω), -5 V to +5 V offset (5 mV increments), -200 mA to 200 mA as current source
Memory	64K x 12 bits waveform per channel, can position 256 data point boundary in the waveform memory, 256 waveforms maximum; catalog memory 4 Mb
Storage	512K internal NVRAM (Li battery soldered on main board), 3.5" floppy drive
Sweep	Linear, Log, Arbitrary; Continuous, Triggered, Gated modes
Interfaces	GPIB, RS-232; direct transfers from TDS Series, 2200/2400 series, 11000 Series, AFG2020 or AWG20XX series
Display	Monochrome CRT, 640×480px., 132 mm × 99 mm display area
Power	100−250 VAC, ≤300 W; fan cooled
Dimensions	160 mm × 360 mm × 490 mm (H/W/L); 10.7 kg (23.5 lb)
Options	Opt. 02 − two additional output channels Opt. 04 − TTL level 12-bit data plus clock output (rear panel) Opt. 05 − Edit clock sweep Opt. 09 − Edit in frequency domain (floating point processor)

Manuals

• Tektronix AWG2005 Manual (PDF)

Pictures

• 
• 
• 
• 
• 
• 
• 
• 
• 
•