LA501: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
* [[Category:Manual needed]] ''please add manual'' | * [[Category:Manual needed]] ''please add manual'' | ||
}} | }} | ||
It provides X/Y/Z outputs for an external oscilloscope or X/Y monitor. | It provides X/Y/Z outputs for an external oscilloscope or X/Y monitor. It has a cable-attached passive 16-channel probe, the [[P6450]]. Alternatively, channels 0-3 can be switched to four [[BNC connector]] inputs with1 MΩ impedance intended for external ×10 probes. | ||
The '''LA501W''' was a bundle of the LA501 with a [[WR501]] connected internally and providing word recognition trigger as well as data acquisition. | The '''LA501W''' was a bundle of the LA501 with a [[WR501]] connected internally and providing word recognition trigger as well as data acquisition. In this case, there is no P6450 probe, instead one or two [[P6451]] probes can be attached to the WR501. | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
Revision as of 11:56, 3 June 2017
The Tektronix LA501 is a logic analyzer plug-in for the TM500 system.
It provides X/Y/Z outputs for an external oscilloscope or X/Y monitor. It has a cable-attached passive 16-channel probe, the P6450. Alternatively, channels 0-3 can be switched to four BNC connector inputs with1 MΩ impedance intended for external ×10 probes.
The LA501W was a bundle of the LA501 with a WR501 connected internally and providing word recognition trigger as well as data acquisition. In this case, there is no P6450 probe, instead one or two P6451 probes can be attached to the WR501.
Key Specifications
| Memory | 4096 bit (4ch/1024 bit, 8ch/512bit or 16ch/256bit) |
|---|---|
| Sampling rate | up to 50 MHz (100 MHz @ 4ch) |
Pictures
-
LA501
-
LA501
-
