36,552
edits
P6046: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Image:Tek P6046 catalog 2.jpg|350px|thumb|right|Tektronix P6046 Differential Probe and Amplifier]] | [[Image:Tek P6046 catalog 2.jpg|350px|thumb|right|Tektronix P6046 Differential Probe and 015-0106-00 Amplifier]] | ||
The '''Tektronix P6046''' is a differential probe | The '''Tektronix P6046''' is a 45/100 MHz differential probe oscilloscope probe. | ||
It was initially intended for use with a [[1A5]] | It was initially intended for use with a [[1A5]], to which it attaches through a 9-pin [[Amphenol 165 series connector]]. | ||
With a 1A5, | A separate amplifier (015-0106-00) was available as an option to use the probe on a 50 Ω input scope set at 10 mV/Div. | ||
With a 1A5, the P6046 has a 45 MHz bandwidth. The raw bandwidth of the probe and amplifier is 100 MHz. | |||
Note that the probe itself acts as either a 1× or 10× attenuation probe dependent on a signal | Note that the probe itself acts as either a 1× or 10× attenuation probe dependent on a signal | ||
voltage on pin D of the connector. When used with the amplifier, 10× mode is used in the | voltage on pin D of the connector. When used with the amplifier, 10× mode is used in the | ||