P6205: Difference between revisions

Jump to navigation Jump to search
2 bytes removed ,  23 May 2021
manual links changed to internal docs
(manual links changed to internal docs)
(3 intermediate revisions by the same user not shown)
Line 15: Line 15:
==Manual==
==Manual==


* [http://w140.com/tek_p6205.pdf Tektronix P6205 Manual (PDF)]
* [[Media:070-8202-01.pdf|Tektronix P6205 Manual (PDF)]]
* [http://w140.com/tekp6203-p62204-p62205-p6217-p6231.pdf Tektronix P6203 P6204 P6205 P6217 P6231 Catalog Specs (PDF)]
* [http://w140.com/tekp6203-p62204-p62205-p6217-p6231.pdf Tektronix P6203 P6204 P6205 P6217 P6231 Catalog Specs (PDF)]


Line 21: Line 21:
<gallery>
<gallery>
P6205_exploded.jpg | Exploded view of the probe assembly. The PCB is soldered to the shielding tube and the coax, and the tube is then crimped over the coax.
P6205_exploded.jpg | Exploded view of the probe assembly. The PCB is soldered to the shielding tube and the coax, and the tube is then crimped over the coax.
P6205_%27scope_side.jpg | The probe uses "lossless" 50Ohm coax, as there's amplification at the business end. The circuitry connects to the TekProbe interface to declare the probe's identity to the scope.
P6205_%27scope_side.jpg | The probe uses "lossless" 50 Ω coax, as there's amplification at the business end. The circuitry connects to the TekProbe interface to declare the probe's identity to the scope.
P6205-int-1.jpg | The tip network comprises three laser-trimmed resistors and a laser-trimmed capacitor. The tip resistance measures 800kOhm, the middle resistor was on the order of 25Ohm, and the resistance to ground is 200kOhm. This makes a 1/5 divider from tip to the amplifier.
P6205-int-1.jpg | The tip network comprises three laser-trimmed resistors and a laser-trimmed capacitor. The tip resistance measures 800 kΩ, the middle resistor was on the order of 25 Ω, and the resistance to ground is 200 kΩ. This makes a 1/5 divider from tip to the amplifier.
P6205-int-2.jpg
P6205-int-2.jpg
P6205-int-3.jpg
P6205-int-3.jpg
P6205-int-4.jpg | It looks like the amplifier has two identical sections, presumably the same chip is used for differential active probes.
P6205-int-4.jpg | It looks like the amplifier has two identical sections, presumably the same chip is used for differential active probes.
</gallery.
</gallery>


[[Category:Active Oscilloscope Probes]]
[[Category:Active oscilloscope probes]]
[[Category:Tekprobe BNC]]
[[Category:Tekprobe BNC]]

Navigation menu