S-311: Difference between revisions

Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
The Tektronix Type S-311 Programmable Dual-Trace Sampling Plug-In Unit  
The '''Tektronix Type S-311''' Programmable Dual-Trace Sampling Plug-In Unit  
is a [[560-series plug-ins|560-series plug-in]] designed for use
is a [[560-series plug-ins|560-series plug-in]] designed for use
in a [[567]] as part of a Tektronix [[S2000]] and [[S3000]]­ Series system.
in a [[567]] as part of a Tektronix [[S2000]] and [[S3000]]­ Series system.
In contrast to the [[3S6]] which uses external sampling heads,
In contrast to the [[3S6]] which uses external sampling heads,
the S-311 contains two samplers internally, like the [[3S76]] or [[3S1]].
the S-311 contains two samplers internally, like the [[3S76]] or [[3S1]].
However, unlike the 3S76 and 3S1, the S-311 gets its signal inputs via
However, unlike the 3S76 and 3S1, the S-311 gets its signal inputs via
BNC connectors on the rear panel.
[[BNC connector]]s on the rear panel.
The input impedance of each input is 50 ohms.
The input impedance of each input is 50 Ω.
The the S-311 is inserted into the mainframe,
When the S-311 is inserted into the mainframe, its BNC input connectors must be manually connected,
the BNC input connectors of the S-311 must be manually connected.
as they are not designed to pair with a corresponding connector in the plug-in bay bulkhead.
The input connectors are not designed to pair with a corresponding
connector in the plug-in bay bulkhead.
The [[567]] mainframe has holes in the plug-in bay bulkhead at the location
The [[567]] mainframe has holes in the plug-in bay bulkhead at the location
of the signal input connectors and programming connector of the S-311.
of the signal input connectors and programming connector of the S-311.
Retrieved from "https://w140.com/tekwiki/wiki/S-311"