S-6: Difference between revisions

Line 12:

* [http://w140.com/TEK_S6_1983.pdf Tektronix S-6 Manual (high quality, 1983, PDF)]

}}

The '''Tektronix S-6 Sampling Head''' plug-in is a 50 Ω feed-through unit with a rise-time of 30 ps and bandwidth of 11.5 GHz. It was [[introduced in 1971]]. The S-6 provides two unterminated 50 Ω SMA connections in a loop-through configuration as is convenient for [[TDR]] applications.

The '''Tektronix S-6 Sampling Head''' plug-in is a 50 Ω feed-through unit with a rise-time of 30 ps and bandwidth of 11.5 GHz.

It was [[introduced in 1971]].

The S-6 provides two unterminated 50 Ω SMA connections in a loop-through configuration as is convenient for [[TDR]] applications.

It is good practice to leave a termination resistor on the unit when unused to give some protection against electrostatic discharge.

Line 35:

Line 37:

==Pictures==

~~File:~~Tek-s6-front.jpg | S-6 front

Tek-s6-front.jpg | S-6 front

~~File:~~Tek s6 2.jpg |S-6, entire plugin

Tek s6 2.jpg |S-6, entire plugin

~~File:~~7s12-s6-s52-f.jpg | S-6 sampling head and [[S-52|S-52 pulse generator head]] in a [[7S12|7S12 TDR/Sampler plugin]]

7s12-s6-s52-f.jpg | S-6 sampling head and [[S-52|S-52 pulse generator head]] in a [[7S12|7S12 TDR/Sampler plugin]]

</gallery>

===Measurements===

~~File:~~Impuls_S6.jpg|Impulse taken with S6 sampling head. Every dot is equivalent to one sample taken, and combined on the CRT with a rate of app. 100 Hz. Bright dots are newer than dimmed ones.

Impuls_S6.jpg|Impulse taken with S6 sampling head. Every dot is equivalent to one sample taken, and combined on the CRT with a rate of app. 100 Hz. Bright dots are newer than dimmed ones.

~~File:~~7s12-s52-incident.jpg | Incident pulse from an S-52 (nom. < 25 ps) displayed by an S-6 head (nom. < 30 ps), both installed in a [[7S12]]. Displayed rise time ~35 ps confirms spec.

7s12-s52-incident.jpg | Incident pulse from an S-52 (nom. < 25 ps) displayed by an S-6 head (nom. < 30 ps), both installed in a [[7S12]]. Displayed rise time ~35 ps confirms spec.

~~File:~~7s12-self-portrait.jpg | "Self Portrait" of an S-6: A pulse reflected on the unterminated "through" path (approx. 120 ps one way)

7s12-self-portrait.jpg | "Self Portrait" of an S-6: A pulse reflected on the unterminated "through" path (approx. 120 ps one way)

</gallery>

[[Category:7000 and 3S series sampling heads]]

@@ Line 12: / Line 12: @@
 * [http://w140.com/TEK_S6_1983.pdf Tektronix S-6 Manual (high quality, 1983, PDF)]
 }}
-The '''Tektronix S-6 Sampling Head''' plug-in is a 50 Ω feed-through unit with a rise-time of 30 ps and bandwidth of 11.5 GHz. It was [[introduced in 1971]].  The S-6 provides two unterminated 50 Ω SMA connections in a loop-through configuration as is convenient for [[TDR]] applications.
+The '''Tektronix S-6 Sampling Head''' plug-in is a 50 Ω feed-through unit with a rise-time of 30 ps and bandwidth of 11.5 GHz.
+It was [[introduced in 1971]].
+The S-6 provides two unterminated 50 Ω SMA connections in a loop-through configuration as is convenient for [[TDR]] applications.
 It is good practice to leave a termination resistor on the unit when unused to give some protection against electrostatic discharge.
@@ Line 35: / Line 37: @@
 ==Pictures==
 <gallery>
-File:Tek-s6-front.jpg | S-6 front
+Tek-s6-front.jpg | S-6 front
-File:Tek s6 2.jpg |S-6, entire plugin
+Tek s6 2.jpg |S-6, entire plugin
-File:7s12-s6-s52-f.jpg | S-6 sampling head and [[S-52|S-52 pulse generator head]] in a [[7S12|7S12 TDR/Sampler plugin]]
+s12-s6-s52-f.jpg | S-6 sampling head and [[S-52|S-52 pulse generator head]] in a [[7S12|7S12 TDR/Sampler plugin]]
 </gallery>
 ===Measurements===
 <gallery>
-File:Impuls_S6.jpg|Impulse taken with S6 sampling head. Every dot is equivalent to one sample taken, and combined on the CRT with a rate of app. 100 Hz. Bright dots are newer than dimmed ones.
+Impuls_S6.jpg|Impulse taken with S6 sampling head. Every dot is equivalent to one sample taken, and combined on the CRT with a rate of app. 100 Hz. Bright dots are newer than dimmed ones.
-File:7s12-s52-incident.jpg | Incident pulse from an S-52 (nom. < 25 ps) displayed by an S-6 head (nom. < 30 ps), both installed in a [[7S12]]. Displayed rise time ~35 ps confirms spec.
+s12-s52-incident.jpg | Incident pulse from an S-52 (nom. < 25 ps) displayed by an S-6 head (nom. < 30 ps), both installed in a [[7S12]]. Displayed rise time ~35 ps confirms spec.
-File:7s12-self-portrait.jpg | "Self Portrait" of an S-6: A pulse reflected on the unterminated "through" path (approx. 120 ps one way)
+s12-self-portrait.jpg | "Self Portrait" of an S-6: A pulse reflected on the unterminated "through" path (approx. 120 ps one way)
 </gallery>
 [[Category:7000 and 3S series sampling heads]]

S-6: Difference between revisions

Navigation menu