T7100: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The '''Tektronix T7100''' (P/N 154-0783-00 with P31 phosphor) is the CRT used in the [[7104]] and [[R7103]] 1 GHz | The '''Tektronix T7100''' (P/N 154-0783-00 with P31 phosphor) is the CRT used in the [[7104]] and [[R7103]] analog 1 GHz scopes. | ||
It features a [[Micro-channel plate CRT|micro-channel plate]] electron beam amplification stage. | It features a [[Micro-channel plate CRT|micro-channel plate]] electron beam amplification stage. | ||
[[File:Micro-channel plate diagram.jpg | thumb | 550px | right | MCP diagram<br />(click image to enlarge)]] | |||
Compared to non-MCP high-speed tubes, the T7100 uses reduced beam current and acceleration voltage | Compared to non-MCP high-speed tubes, the T7100 uses reduced beam current and acceleration voltage | ||
to achieve high deflection sensitivity, eliminating the need for high amplifier output voltages, thereby boosting | to achieve high deflection sensitivity, eliminating the need for high amplifier output voltages, thereby boosting | ||
| Line 10: | Line 10: | ||
an electrostatic scan-expansion lens that increases deflection 4.5 times vertically and 4 times | an electrostatic scan-expansion lens that increases deflection 4.5 times vertically and 4 times | ||
horizontally, before it hits the micro-channel plate (MCP). | horizontally, before it hits the micro-channel plate (MCP). | ||
The deflection structures are described in US Patent 4,093,891. | The deflection structures are described in [https://patents.google.com/patent/US4093891 US Patent 4,093,891]. | ||
The scan-expansion lens is a "box lens" design, which is discussed on pages | The scan-expansion lens is a "box lens" design, which is discussed on pages 53−55 | ||
of the | of the ''[[Media:7104_maintenance.pdf|7104 maintenance document]]''. | ||
The MCP consists of parallel channels of 25 μm diameter and offset at a slight angle to the beam. | The MCP consists of parallel channels of 25 μm diameter and offset at a slight angle to the beam. | ||
| Line 19: | Line 19: | ||
of secondary electron emission like in a [https://en.wikipedia.org/wiki/Photomultiplier photomultiplier]. | of secondary electron emission like in a [https://en.wikipedia.org/wiki/Photomultiplier photomultiplier]. | ||
A final 10 kV potential accelerates the beam across a 3 mm gap toward the phosphor coating. | A final 10 kV potential accelerates the beam across a 3 mm gap toward the [[phosphor]] coating. | ||
The beam amplification is sufficient to view a [[Media:Tek7104-200ps-singleshot.jpg|single-shot event at 200 ps/Div]] with the naked eye. | The beam amplification is sufficient to view a [[Media:Tek7104-200ps-singleshot.jpg|single-shot event at 200 ps/Div]] with the naked eye. | ||
The Micro-channel plate's amplification degrades irreversibly with operation, in proportion to the log of total charge passed per channel or display area. | |||
For this reason, continued operation with a steady trace and especially at large beam currents must be avoided. | For this reason, continued operation with a steady trace and especially at large beam currents must be avoided. | ||
The 7104 contains a CRT protection circuit that shuts off the beam after a time depending on the beam current. | |||
{{BeginSpecs}} | |||
{{Spec | Screen size | 8 × 10 Div. @ 8.5 mm }} | |||
{{Spec | Resolution | 17 lines / Div. }} | |||
{{Spec | Vertical deflection factor | 1 V/cm }} | |||
{{Spec | Vertical deflection impedance | 200 Ω }} | |||
{{Spec | Vertical bandwidth | 2.6 GHz (3 GHz spec claimed in maintenance document linked below) }} | |||
{{Spec | Horizontal deflection factor | 2 V/Div }} | |||
{{Spec | Horizontal deflection impedance | 365 Ω }} | |||
{{Spec | Horizontal bandwidth | 1.5 GHz }} | |||
{{EndSpecs}} | |||
==Links== | ==Links== | ||
Revision as of 04:28, 26 June 2018
The Tektronix T7100 (P/N 154-0783-00 with P31 phosphor) is the CRT used in the 7104 and R7103 analog 1 GHz scopes. It features a micro-channel plate electron beam amplification stage.
(click image to enlarge)
Compared to non-MCP high-speed tubes, the T7100 uses reduced beam current and acceleration voltage to achieve high deflection sensitivity, eliminating the need for high amplifier output voltages, thereby boosting amplifier bandwidth.
The electron beam passes through terminated helical deflection plates (both X and Y axes use this form of distributed deflection plates to achieve the necessary bandwidth), followed by an electrostatic scan-expansion lens that increases deflection 4.5 times vertically and 4 times horizontally, before it hits the micro-channel plate (MCP). The deflection structures are described in US Patent 4,093,891. The scan-expansion lens is a "box lens" design, which is discussed on pages 53−55 of the 7104 maintenance document.
The MCP consists of parallel channels of 25 μm diameter and offset at a slight angle to the beam. The inside walls of these channels are coated with resistive material, with a voltage of 700-1050 V applied between back and front of the plate. Electrons entering a channel hit the wall where they initiate a cascade of secondary electron emission like in a photomultiplier.
A final 10 kV potential accelerates the beam across a 3 mm gap toward the phosphor coating.
The beam amplification is sufficient to view a single-shot event at 200 ps/Div with the naked eye.
The Micro-channel plate's amplification degrades irreversibly with operation, in proportion to the log of total charge passed per channel or display area. For this reason, continued operation with a steady trace and especially at large beam currents must be avoided. The 7104 contains a CRT protection circuit that shuts off the beam after a time depending on the beam current.
Key Specifications
| Screen size | 8 × 10 Div. @ 8.5 mm |
|---|---|
| Resolution | 17 lines / Div. |
| Vertical deflection factor | 1 V/cm |
| Vertical deflection impedance | 200 Ω |
| Vertical bandwidth | 2.6 GHz (3 GHz spec claimed in maintenance document linked below) |
| Horizontal deflection factor | 2 V/Div |
| Horizontal deflection impedance | 365 Ω |
| Horizontal bandwidth | 1.5 GHz |
Links
Pictures
-
154-0783-00 T7100 CRT
-
154-0783-00 T7100 CRT
Screen shots
-
7104 recording a single shot pulse (from 067-0587-02) at 200 ps/Div. Camera: Nikon D7000, 50 mm f/1.4, ISO 3200, 1/2 s. CRT filter not removed.
-
7104 recording 1 GHz sine, single shot at 500 ps/Div. Camera: Nikon D7000, 50 mm f/1.4, ISO 3200, 1/2 s. CRT filter not removed. CRT amplification loss is evident around the center line.
