UPIK 40

The UPIK40 is a harness that enables easy connection to a DIP-40 integrated circuit package. It is meant to be used with the 1240 and 1241 alongside disassembly software.

thimb
thimb

The pictures below were taken of a Z80 probe interface. The pin-out for the 40 pin female connector that connects the ribbon cable (aka octopus cable as seen in photo 6) adapter to the probes follows. NOTE: The connector numbering follows the DIP pin numbering convention (down one side and up the other), NOT the regular ribbon cable standard of odds down one side, evens on the other. Each 40-pin microprocessor gets its own version of the octopus.

Pin Color Primary
91A24 Pod
1240 Pod Pod color Secondary
91A24 Pod
1240 Pod Pod Color
1 orange 2a 3 orange
2 yellow 2a 3 yellow
3 green 2a 3 green
4 blue 2a 3 blue
5 violet 2a 3 violet
6 N/C
7 yellow 1B 1 yellow
8 orange 1B 1 orange
9 green 1B 1 green
10 blue 1B 1 blue
11 N/C
12 red 1B 1 red
13 violet 1B 1 violet
14 black 1B 1 black
15 brown 1B 1 brown
16 yellow 1C 2 yellow
17 N/C
18 violet 1C 2 violet
19 black 2A 3 white 1C 2 orange
20 black 1A 0 white 1C 2 green
21 black 1C 2 red 1C 2 white
22 black 1C 2 brown 1B 1 white
23 blue 1C 2 blue
24 N/C
25 N/C
26 N/C
27 black 1C 2 black
28 N/C
29 black Ground Lug
30 black 1A 0 black
31 brown 1A 30 brown
32 red 1A 0 red
33 orange 1A 0 orange
34 yellow 1A 0 yellow
35 green 1A 0 green
36 blue 1A 0 blue
37 violet 1A 0 violet
38 black 2A 3 black
39 brown 2A 3 brown
40 red 2A 3 red

A spreadsheet version of this which also contains the 6502 connections from the PDF, and extrapolated 6800 pin outs (with maybe the right connections for control signals) is here:

Pictures