8056

From TekWiki
(Redirected from 154-0417-00)
Jump to navigation Jump to search
Nuvistor 8056

The 8056  (P/N 154-0417-00) is a low-voltage Nuvistor triode vacuum tube with a 6.3 V heater.

It is used in the 422, 502, early W, 1S1, 3A7, early 3S3, 3T4, 5T3, and 10A1. It can sometimes be replaced with a MPF102 FET.

The 8056 has a maximum plate-to-cathode voltage of 50 V. Contrast this with another Nuvistor triode, the 7586, which has a maximum plate-to-cathode voltage of 110 V (however, one of the 8056 test conditions for 157-0099-00 puts 100 V on the plate.)

The 7586 and 8056 have the same pinout, but the two tubes are not interchangeable since they have different voltage ratings.

For example, in the front-end cathode followers of the 3A1, the plate voltage of the 7586 tubes, V113 and V123, is 55 V, and possibly a bit higher during warm-up. This exceeds the maximum plate voltage of the 8056, unless the 3A1 is modified for lower front-end plate voltages.

Aged/Checked/Matched Pair Details
Used in Tek Part# S/N Range
502, W, 3A7, 10A1 157-0099-00 All

Reference:

Tube aging procedure / Selection and checking procedure

Links

Some instruments using part 8056

Instrument Manufacturer Class Model Description Introduced
10A1 Tektronix Plug-in 10A1 Differential amplifier plug-in 1965
1S1 Tektronix Plug-in 1S1 1 GHz sampling system 1965
3A7 Tektronix Plug-in 3A7 Differential amplifier plug-in 1965
3S3 Tektronix Plug-in 3S3 Dual-trace sampling plug-in 1963
3T4 Tektronix Plug-in 3T4 Programmable sampling sweep plug-in 1965
422 Tektronix Oscilloscope 422 15 MHz portable dual-trace scope 1965
502 Tektronix Oscilloscope 502 1 MHz dual beam differential scope 1958
5T3 Tektronix Plug-in 5T3 Timing plugin 1965
W Tektronix Plug-in Type W 8-23 MHz differential comparator 1965