1A5: Difference between revisions

1A5 (view source)

385 bytes added , 21 September 2010

add specs, features, comparisons

299

edits

Revision as of 04:26, 5 July 2010 (view source) Kurt (talk \| contribs) No edit summary ← Older edit		Revision as of 10:15, 21 September 2010 (view source) Vintage dave (talk \| contribs) (add specs, features, comparisons) Newer edit →
Line 1:		Line 1:
	The ~~Tektronix~~ 1A5 is a differential amplifier plug-in for 500-series scopes. The maximum differential sensitivity is 1mV/div. Like most Tektronix differential plug-ins, it has three modes: Va-Vc, Va-Vb, and Vc-Vb. ~~The~~ 1A5 was [[introduced in 1967]].		The Type 1A5 is a differential amplifier plug-in for 500-series scopes. Bandwidth is 50MHz down to 5mV/div. The maximum differential sensitivity is 1mV/div, with a bandwidth of 40MHz. Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20MHz. Like most Tektronix differential plug-ins, it has three modes: Va-Vc, Va-Vb, and Vc-Vb. Vc is controlled by a ten-turn pot and can vary from -5V to +5V (0.5V on the 5V/div to 20V/div ranges). There is a front-panel jack for direct connection of the Type P6046 Active Differential Probe. Type 1A5 was [[introduced in 1967]], replacing Types [[W]] and [[Z]].

	<gallery>		<gallery>