2252: Difference between revisions

2252 (view source)

Revision as of 22:22, 3 June 2019

1,706 bytes added , 3 June 2019

no edit summary

Jyohe

1,192

edits

@@ Line 2: / Line 2: @@
 title=Tektronix 2252 |
 summary=100 MHz portable 4-channel scope |
-image=Tek 2252.jpg |
+image= Tek 2252 trace3.jpg |
 caption=Tektronix 2252 |
-introduced=1991 |
+introduced=1989 |
-discontinued=1994 |
+discontinued=1995 |
 manuals=
 * [[Media:Tek_2252_2247A_2245A_Specs.pdf|Tektronix 2245A/2247A/2252 Specifications (PDF)]]
 * [[Media:2252_2247A_2245A_Specs.pdf|Tektronix 2245A/2247A/2252 Specifications (PDF, OCR, bad-OCR)]]
+* [[Media: TEK 2252 Operations.pdf| Tektronix 2252 Operators Manual (PDF, OCR, bad-OCR ends at page 4-6)]]
+* [[Media:070-7837-00.pdf|Tektronix 2252 Operators Manual (PDF, OCR, bad-OCR ends at page 4-6)]]
+}}
+The '''Tektronix 2252''' is a 100 MHz four-channel analog oscilloscope with a built-in 200 MHz counter/timer.
+The 2252 is identical to the 2247A but with added functions of Push-Button Hardcopy Output on the front panel, and on the back panel a Centronics-compatible 25-pin connector for printing waveforms and a GPIB port for full programmability.
-* [[Media: TEK 2252 Operations.pdf| Tektronix 2252 Operators Manual (PDF)]]
+Channels 1-2 are fully-functional, whereas 3-4 are limited in both deflection factor and coupling, as they are intended mainly for digital and trigger signals.
-* [[Media:070-7837-00.pdf|Tektronix 2252 Operators Manual (PDF, OCR, bad-OCR)]]
-}}
-The '''Tektronix 2252''' is a 100 MHz four-channel analog oscilloscope, with a built-in 200 MHz counter/timer.
-The 2252 is part of a nearly identical family consisting of the [[2245]], [[2246]], [[2247]], and 2252.
+The 2252 has advanced features like automatic setup, tracking cursors, integrated voltmeter and counter/timer functions, and store/recall of 20 front panel setups.
-It differs from the 2247 in that the counter/timer and oscilloscope setup can be fully controlled through a [[GPIB interface]].
-Two channels are full-functioned, and two are very limited, in both deflection factor and coupling.
+{{BeginSpecs}}
+{{Spec | Bandwidth | 100 MHz }}
+{{Spec | Deflection| CH 1, CH 2: 2 mV/div to 5 V/div in 1-2-5 seq; CH 3, CH 4: 0.1 V/div and 0.5 V/div, all ±2%; BW Limit: 20 MHz ±15%  }}
+{{Spec | Vertical Operating Modes | CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz) }}
+{{Spec | Input Impedance| 1 MΩ ±1.0% // 20 pF ±1 pF }}
+{{Spec | Maximum Input Voltage| 400 V (DC + peak AC) or 800 V (p-p ac at ≤ 10 kHz) }}
+{{Spec | Sweep Speeds| A Time Base: 0.5 s/div to 20 ns/div in 1-2-5 seq; B Time Base: 5 ms/div to 20 ns/div in 1-2-5 seq (×10 magnifier to 2 ns/div) }}
+{{Spec | Trigger| DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field }}
+{{Spec | Trigger Modes| A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source) }}
+{{Spec | Trigger Source A & B| Vert, CH1, 2, 3, 4, Line }}
+{{Spec | Voltmeter| DC, +Peak, −Peak, PK-PK, Gated Volts, Smart Tracking Cursors: Volts, Gnd, Trigger Lvl }}
+{{Spec | Counter/Timer| Freq, Period, Width, Totalize, Freq Ratio, Sec, 1/Sec, Phase, Rise/Fall Time, Prop Delay Time }}
+{{Spec | Cursors| Time, 1/Time, Delta Time, 1/Delta Time, Delta Phase, Volts }}
+{{Spec | Interface| Centronics Printers: Epson FX-Series (25-pin); GPIB connector; Ext Counter/Timer Base Input connector; Ext Z-Axis Input connector }}
+{{Spec | Probes| Two [[P6109]] 100 MHz ×10 probes, [[BNC connector]] with a [[readout pin]] }}
+{{Spec | Power| 100 W max, 90 − 250 V<sub>AC</sub>, 48 − 445 Hz }}
+{{EndSpecs}}
-==Specifications==
-[[Category:Specifications needed]] ''please add''
 ==Pictures==
 <gallery>
 Tek 2252.jpg
@@ Line 34: / Line 52: @@
 Tek 2252 trace3.jpg
 </gallery>
 [[Category:2246 series scopes]]
-[[Category:GPIB interface]]

2252: Difference between revisions

2252 (view source)

Revision as of 22:22, 3 June 2019

Navigation menu