AM501: Difference between revisions

AM501 (view source)

214 bytes added , 1 October 2021

Added picture and expanded description of AM501 Auxiliary Circuit Board Kit

1,344

edits

@@ Line 5: / Line 5: @@
 Also available was the accessory "AM501 Auxiliary Circuit Board Kit', Part number: 013-0146-00.<br>
 Described as:<br>
-"The Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The PC board has six terminal studs that attach to the amplifier's banana jacks and is approximately 2.5-inches square. The designer can configure a network of components for use in conjunction with the AM 501's input, output, or feedback circuits.<br>
+"The AM501 Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The kit is a PC board has six terminal studs for attachment to the amplifier's banana jacks and is approximately 2.5-inches square. This permits the designer to build a circuit of resistors, capacitors, and other components for use in conjunction with the AM 501's input, output, or feedback circuits. With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier.<br>
-With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier."
+An additional advantage of the kit is that it does not interfere with the other connectors on the face of the AM501."
 {{BeginSpecs}}
@@ Line 27: / Line 27: @@
 Tek am501.jpg
 Tek-am501-side.jpg
+AM501_Auxiliary_Circuit_Board_Kit.png
 </gallery>