851
edits
m (→Connector keys: Wording) |
m (Swap table columns to be consistent with 5k and 7k pages. Adjust wording.) |
||
Line 17: | Line 17: | ||
|- | |- | ||
!width="10%"| | !width="10%"| | ||
!width="45%"| A side | |||
!width="45%"| B side | !width="45%"| B side | ||
|- | |- | ||
! Pin | ! Pin | ||
Line 26: | Line 26: | ||
| 28..14 || Signals || Signals | | 28..14 || Signals || Signals | ||
|- bgcolor="LightBlue" | |- bgcolor="LightBlue" | ||
! 13 | |||
| 25 V<sub>AC</sub> winding #1 || 25 V<sub>AC</sub> winding #1 | |||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
! 12 | |||
| +33.5 V filtered DC || +33.5 V filtered DC | |||
|- bgcolor="LightGreen" | |- bgcolor="LightGreen" | ||
! 11 | |||
| Base lead of PNP series pass || Collector lead of PNP series pass | |||
|- | |- | ||
! 10 | |||
| bgcolor="LightGreen" | Emitter lead of PNP series pass || Transformer shield lead | |||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
! 9 | |||
| ±33.5 V common return || ±33.5 V common return | |||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
! 8 | |||
| −33.5 V filtered DC || −33.5 V filtered DC | |||
|- bgcolor="LightGreen" | |- bgcolor="LightGreen" | ||
! 7 | |||
| Emitter lead of NPN series pass || Collector lead of NPN series pass | |||
|- bgcolor="Black" | |- bgcolor="Black" | ||
| | | || || | ||
|- | |- | ||
! 6 | |||
| bgcolor="LightGreen" | Base lead of NPN series pass || No connection | |||
|- bgcolor="LightBlue" | |- bgcolor="LightBlue" | ||
! 5 | |||
| 17.5 V<sub>AC</sub> winding || 17.5 V<sub>AC</sub> winding | |||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
! 4 | |||
| +11.5 V common return || +11.5 V common return | |||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
! 3 | |||
| +11.5 V common return || +11.5 V common return | |||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
! 2 | |||
| +11.5 V filtered DC || +11.5 V filtered DC | |||
|- bgcolor="LightBlue" | |- bgcolor="LightBlue" | ||
! 1 | |||
| 25 V<sub>AC</sub> winding #2 || 25 V<sub>AC</sub> winding #2 | |||
|- | |- | ||
|} | |} | ||
Interface connections viewed from | Interface connections viewed from front of power module. Pins 14 through 28 are used for signal connections. | ||
25 V<sub>AC</sub> winding connections 1A, 13A are in phase, i.e. for 50 V<sub>ct</sub> connect 1B-13A as for example in the [[PS502]]. | 25 V<sub>AC</sub> winding connections 1A, 13A are in phase, i.e. for 50 V<sub>ct</sub> connect 1B-13A as for example in the [[PS502]]. | ||
Line 76: | Line 89: | ||
The standard TM500 frames simply have a key between pins 6 and 7 as shown in Figure 3-1 from the [[Media:070-2088-00.pdf|TM 500 Rear Interface Data Book]]: | The standard TM500 frames simply have a key between pins 6 and 7 as shown in Figure 3-1 from the [[Media:070-2088-00.pdf|TM 500 Rear Interface Data Book]]: | ||
<gallery> | <gallery> | ||
070-2088-01 TM500 Rear Interface Data Book Figure 3-1.png | 070-2088-01 TM500 Rear Interface Data Book Figure 3-1.png | ||
</gallery> | </gallery> | ||
edits