WP2020
Jump to navigation
Jump to search
The Tektronix WP2020 Transient Digitizer System is a high speed transient signal acquisition system with CP Bus Interface and TEK SPS BASIC Software. It is compatible with CP4165 and CP1100 Series Controllers
Configuration July 1978
Count | Description | Price |
---|---|---|
1 | R7912 Transient Digitizer including memory, ASCII SCALE Factor readout and CP Bus Interface | |
1 | 012-0509-03 R7912/CP Bus Cable (3.7 meters) | |
1 | 7A19 Single-Trace Amplifier | |
1 | 7B92A Dual Time Base | |
1 | 607A X-Y Display Monitor with 040-0601-00 Rackmount Kit | |
1 | 012-0074-00 75Ohm BNC Cable | |
1 | 011-0055-00 75Ohm Termination | |
1 | 012-0487-00 607/R7912 Cable | |
1 | 437-0245-00 (14") 35.5 cm Cabinet | |
1 | TEK SPS BASIC on single floppy diskette with: CP85871 TEK SPS BASIC CP71271 R7912 Driver Package CP91171 Signal Processing Package CP91271 Graphics Package |
|
System manual and accessories | ||
$29,600 |
Options July 1978
Number | Description | Price |
---|---|---|
02 | Delete plug-ins | -$3,105 |
03 | Delete interface cable; order desired length cable separately | -$520 |
04 | Delete 35.5cm (14") Cabinet | -$530 |
07 | Delete TEK SPS BASIC | -$6,930 |
08 | Change TV scan rate (625 line/50Hz) | N/C |
09 | Change line voltage (230 V/50 Hz) | N/C |
10 | Delete 607A X-Y Display Monitor and mounting hardware | -$1,780 |
11 | Add 57.8 cm Cabinet | +$750 |
12 | Add 634 Video Monitor and mounting hardware with external sync and cables | +$1,335 |
20 | Add CP1100/CP Bus Interface for controller | +$675 |
21 | Add CP4100/CP Bus Interface for controller | +$500 |
22 | Add CAMAC interface for CAMAC crate | +$1,590 |
28 | Add 4632 Video Hard Copy Unit | +$4,395 |
40 | Provide TEK SPS BASIC on cartridge disk | +$120 |
41 | Add DPO Driver Package (combined with TEK SPS BASIC) | +$825 |
43 | Add TEK SPS BASIC high level support package CP89771 | +$550 |
44 | Add TEK SPS BASIC assembly level support package CP89772 | +$2,750 |