485: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
Line 15: Line 15:
}}
}}
The '''Tektronix 485''' is a dual-trace, portable analog oscilloscope with a maximum  
The '''Tektronix 485''' is a dual-trace, portable analog oscilloscope with a maximum  
bandwidth of 350 MHz. The impedance of the inputs can be set individually to 50 Ω or 1 MΩ.   
bandwidth of 350 MHz, [[introduced in 1972|introduced in March of 1972]].
The project leader for the horizontal section of the 485 was [[Murlan Kaufman]].
 
The impedance of the inputs can be set individually to 50 Ω or 1 MΩ.   
The scope achieves its maximum bandwidth when the inputs are in 50 Ω mode.   
The scope achieves its maximum bandwidth when the inputs are in 50 Ω mode.   
The 485 was [[introduced in 1972|introduced in March of 1972]].  It includes a switching
power supply and uses [[155-0078-00|custom integrated circuits]] for most of the gain blocks. 
Triggering uses [[tunnel diodes]].


A distinguishing feature – at least in a portable oscilloscope of its period – is the Alternate Horizontal Mode.
A distinguishing feature – at least in a portable oscilloscope of its period – is the Alternate Horizontal Mode.
In this mode, the B timebase is shown in a separate full-width scan, as opposed to the more common Mixed Mode,  
In this mode, the B timebase is shown in a separate full-width scan, as opposed to the more common Mixed Mode,  
where the B timebase is shown on the same line as the A timebase, after the delay time. At the same time,
where the B timebase is shown on the same line as the A timebase, after the delay time.  
The project leader for the horizontal section of the 485 was [[Murlan Kaufman]].


The [[465]], which was introduced after the 485, only received this feature in its "B" incarnation (465B).
The [[465]], which was introduced after the 485, only received this feature in its "B" incarnation (465B).


485-1 is without "A EXT Trigger display" and 485-2 is without "A EXT Trigger display" and only 50Ω input.
Variant 485-1 omits the "A EXT Trigger display", as does variant 485-2 which additionally only has 50 Ω inputs.


{{BeginSpecs}}
{{BeginSpecs}}
Line 45: Line 43:
* [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_other/485.html Tek 485 @ amplifier.cd]
* [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_other/485.html Tek 485 @ amplifier.cd]
* [https://youtube.com/watch?v=7Qg6ory3L8Y 485 troubleshooting] @ YouTube
* [https://youtube.com/watch?v=7Qg6ory3L8Y 485 troubleshooting] @ YouTube
==Internals==
The 485 includes a switching power supply and uses [[155-0078-00|custom integrated circuits]] for most of the gain blocks.  Triggering uses [[tunnel diodes]].


==Maintenance issues==
==Maintenance issues==

Revision as of 05:14, 14 October 2021

Tektronix 485
350 MHz portable scope
Tektronix 485

Produced from 1972 to 1986

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 485 is a dual-trace, portable analog oscilloscope with a maximum bandwidth of 350 MHz, introduced in March of 1972. The project leader for the horizontal section of the 485 was Murlan Kaufman.

The impedance of the inputs can be set individually to 50 Ω or 1 MΩ. The scope achieves its maximum bandwidth when the inputs are in 50 Ω mode.

A distinguishing feature – at least in a portable oscilloscope of its period – is the Alternate Horizontal Mode. In this mode, the B timebase is shown in a separate full-width scan, as opposed to the more common Mixed Mode, where the B timebase is shown on the same line as the A timebase, after the delay time.

The 465, which was introduced after the 485, only received this feature in its "B" incarnation (465B).

Variant 485-1 omits the "A EXT Trigger display", as does variant 485-2 which additionally only has 50 Ω inputs.

Key Specifications

Input Impedance 50 Ω / 1 MΩ // 20 pF
Rise time 1 ns (50 Ω) / 1.4 ns (1 MΩ)
Bandwidth 350 MHz (50 Ω) / 250 MHz (1 MΩ)
Deflection 5 mV/div to 5 V/div in 1−2−5 sequence, 2% accuracy
Time Base 1 ns/div to 0.5 s/div in 1−2−5 sequence
CRT 154-0652-00 and 154-0652-05, 21 kV acceleration, 8x10 divisions (0.8cm/div)
Weight 21.5 lb/9.3 kg
Power AC 90-136V/180-272V 48-440Hz, 60W @115V

Links

Internals

The 485 includes a switching power supply and uses custom integrated circuits for most of the gain blocks. Triggering uses tunnel diodes.

Maintenance issues

A healthy Tek 485 CRT has been observed to have a filament current of 98 mA. A broken Tek 485 CRT that lost its vacuum was observed to have a filament current of 153 mA.

Pictures

External

Internals


Custom ICs used in the 485

Page Model Part nos Description Designers Used in
155-0011-00 M012 155-0011-00 clock and chop blanking Les Larson 485 7313 7403N R7403N 7503 7504 7514 7603 AN/USM-281C 7613 7623 7623A 7633 7704 R7704 7704A 7834 7844 7854 7904 7904A R7903 R7912 7912AD 7912HB 7934 7104 R7103 AN/USM-281C
155-0012-00 M015 155-0012-00 Z Axis Logic Les Larson 485 7504 7514 7704 R7704 7704A 7834 7844 7854 7904 R7903 7904A R7912 7934 7912AD 7912HB 7104 R7103
155-0049-00 M079G 155-0049-00 155-0049-01 155-0049-02 sweep control with lockout Bill DeVey 335 464 465 466 475 475A 475M 485 5B31 5B40 5B52 5B42 5B44 7B53A 7B80 7B85 7B87 7B92A 7B90P 7B10 7B15 SC502 7B42N AN/USM-281C 067-0657-00
155-0064-00 H074A 155-0064-00 vertical output amplifier 7834 7854 7904 R7903 7912AD 485 PG502
155-0067-02 M091B 155-0067-00 155-0067-02 155-0067-03 SMPS controller Joe Burger Gene Andrews 7704A 7834 7844 7854 7904 R7903 7904 7904A 7934 R7912 7912AD 7912HB 7934 7104 R7103 308 434 485 690 P7001
155-0076-00 M94 155-0076-00 input protection and probe logic John Addis Wink Gross 465 485 7A29 7A29P 11A52 11A71 11A72 SCD1000
155-0078-00 M084 155-0078-xx 155-0273-00 155-0274-00 broadband amplifier John Addis 464 465 466 468 475 475A 475M 485 7834 7844 7854 7904 R7903 R7912 7912AD 7912HB 7104 7A16A 7A16P 7A24 7A26 7A42 067-0587-01 067-0680-00 AM503 PG502 PG508 DC510 DC5010 FG5010