7A18/Repairs: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

20 July 2024

19 June 2024

  • curprev 05:3205:32, 19 June 2024‎ Peter talk contribs‎ 639 bytes −1‎ No edit summary
  • curprev 05:2405:24, 19 June 2024‎ Peter talk contribs‎ 640 bytes +640‎ Created page with "==Attenuator solder joints=== The pins of the attenuator modules are connected to conductive traces on the ceramic substrate inside by low-temperature soldering, which can go bad. Re-seating the module can temporarily restore the internal contact but will usually not fix the problem permanently. Repair is possible by opening the click-locked lid and carefully resoldering. ==Variable gain pots== These pots (R237A,B and R437A,B 315-0241-00) are bonded together - that bond..."
Retrieved from "https://w140.com/tekwiki/wiki/7A18/Repairs"