1 row is stored for this page
| Field | Field type | Value |
|---|
| _creationDate | Datetime | 2017-03-16 3:19:30 AM |
| _modificationDate | Datetime | 2024-05-15 6:38:49 PM |
| _categories | List of String, delimiter: | | Introduced in 1993 • Manual needed • Spectrum analyzers |
| _isRedirect | Boolean | No |
| _pageID | Integer | 9,858 |
| _pageName | Page | 2714 |
| _pageTitle | String | 2714
|
| _pageNamespace | Integer | 0 |
1 row is stored for this page
| Field | Field type | Value |
|---|
| Manufacturer | Page | Tektronix |
| Model | String | 2714 |
| Class | String | Spectrum Analyzer |
| Description | Wikitext string | 1.8 GHz Spectrum Analyzer
|
| Series | Page | |
| Introduced | Text | 1993 |
| Designers | List of Page, delimiter: ; | |
| Discontinued | Text | 2000 |
16 rows are stored for this page
| Field | Field type | Value |
|---|
| Parameter | String | Frequency |
| Value | Wikitext | 9 kHz to 1.8 GHz; Preamp limited to 600 MHz
|
| Field | Field type | Value |
|---|
| Parameter | String | Frequency Span |
| Value | Wikitext | 1 kHz/div to 100 MHz/div in 1, 2, 5 sequence (plus 0 Hz and MAX: 180 MHz/div)
|
| Field | Field type | Value |
|---|
| Parameter | String | Resolution Bandwidth |
| Value | Wikitext | –6 dB bandwidth selections are 300 Hz, 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz, 300 kHz, 1 MHz and 5 MHz
|
| Field | Field type | Value |
|---|
| Parameter | String | RF Input impedance |
| Value | Wikitext | 75 Ω
|
| Field | Field type | Value |
|---|
| Parameter | String | Maximum Safe Input Power |
| Value | Wikitext | +70 dBmV (0.1 W or 2.2 V) continuous peak, ≤100 V DC blocking capacitor
|
| Field | Field type | Value |
|---|
| Parameter | String | RF Attenuator |
| Value | Wikitext | 0 dB to 50 dB, 2 dB steps
|
| Field | Field type | Value |
|---|
| Parameter | String | Sensitivity |
| Value | Wikitext | (at 300 Hz RBW) -78 dBmV (-127 dBm); -90 dBmV (-139 dBm) with preamp on
|
| Field | Field type | Value |
|---|
| Parameter | String | Reference Level |
| Value | Wikitext | -70 dBm to +20 dBm; -23 dBmV to +66.9 dBmV
|
| Field | Field type | Value |
|---|
| Parameter | String | Sweep Speed |
| Value | Wikitext | 2 sec/Div to 1 µs/Div in 1, 2, 5 sequence
|
| Field | Field type | Value |
|---|
| Parameter | String | Triggering Modes |
| Value | Wikitext | Free Run, Internal, External, Line, TV Line, and TV Field
|
| Field | Field type | Value |
|---|
| Parameter | String | Displayed Average Noise |
| Value | Wikitext | −66 dBm to −100 dBm
|
| Field | Field type | Value |
|---|
| Parameter | String | Display Dynamic Range |
| Value | Wikitext | 80 dB
|
| Field | Field type | Value |
|---|
| Parameter | String | Dynamic Range |
| Value | Wikitext | ≥100 dBm
|
| Field | Field type | Value |
|---|
| Parameter | String | Internal Calibrator |
| Value | Wikitext | 100 MHz marker at +18.8 dBmV (-30 dBm)
|
| Field | Field type | Value |
|---|
| Parameter | String | Power |
| Value | Wikitext | 90 − 132 VAC, 48 to 440 Hz; 90 – 250 VAC, 48 to 63 Hz. At 115 VAC, 60 Hz, 90 W (standard), 105 W max (with options)
|
| Field | Field type | Value |
|---|
| Parameter | String | Features |
| Value | Wikitext | - 124 kB NVRAM to save up to 108 waveform displays, 36 front panel setups, -defined key programs, and antenna factor tables.
- Single and delta markers – readout of frequency and amplitude
- Digital storage display
- Acquisition modes: positive peak only, positive/negative peak, Max hold, Waterfall, an analog sweep (when digital storage is off)
- Ensemble averaging
- Internal preamp
- Internal Calibrator
- Alternate reference level units (dBm, dBmV, dBV, dBµV, dBµW, and dBµV/m)
- Direct plot/print (Printers via Opt. 03 GPIB, or RS-232-C interface via Opt. 08).
|