D: Difference between revisions
(+cat, template) |
m (-) |
||
| Line 9: | Line 9: | ||
manuals= | manuals= | ||
* [http://w140.com/mmm/tek-d.pdf Tektronix Type D Manual (PDF)] | * [http://w140.com/mmm/tek-d.pdf Tektronix Type D Manual (PDF)] | ||
* http:// | * [http://w140.com/tek_fcp/tek_type_d_factory_cal_proc.pdf Cal procedure] | ||
* http:// | * [http://bama.edebris.com/manuals/tek/d/ Type D manual @ BAMA] | ||
}} | }} | ||
Revision as of 09:24, 25 June 2014
The Tektronix Type D is a plug-in for 500-series scopes.
It has high gain, and the bandwidth depends on the gain, ranging from 2 MHz at 50 mV/div and up, to 300 kHz at 1 mV/div.
It displays the difference between two input signals, with a common-mode rejection ratio of 10,000. It has six tubes, on a shock-mounted subchassis to avoid microphonics.
Type D was introduced with the 531 and 535 in 1954 as Type 53D, was briefly renamed Type 53D/54D in 1955 with the introduction of the 541 and 545, then quickly renamed Type 53/54D, then shortened to Type D in 1959 with the introduction of the 5xxA scopes. Its last year was 1968.
Some production used a pair of 5814 tubes at the input while others used 12AU7's. These two tube types have different heater currents, and because the heaters are series-wired, you cannot switch from one type to the other without circuit modification.
Specifications
please add
Pictures
-
-
Front
-
Chassis
-
Rubber support for mircophone-elimination
-
Chassis bottom
-
Early Schematic
-
Late Schematic
-
Late Attenuators
