EIP 101A: Difference between revisions

{{BeginSpecs}}

{{Spec | Frequency Coverage | 1-12.4 GHz (useable . 7 - 15.7 GHz)* }}

{{Spec | Dial Frequency Accuracy | 10 MHz +, 3% ** }}

{{Spec | Selectable Video Bandwidths | 1 KHz, 100 KHz, 3 MHz }}

{{Spec | Frequency Response | + 2 dB typical, ±4 dB maximum }}

{{Spec | Calibrated Dispersion | 0 - 11. 4 GHz (useable 0 - 15. 0 GHz) }}

{{Spec | Dispersion Resettability | Typical 10MHz }}

{{Spec | Dispersion Dial Accuracy | Typical 10 MHz or ±. 5% whichever is greater }}

{{Spec | Preselection | 3 Resonator YIG filter, nominal 3 dB bandwidth 15 MHz, straight thru leakage >60 dB down, tracking spurious typically >45 dB down*** }}

{{Spec | Resolution | Typicall5 MHz }}

{{Spec | Image Rejection | Generates no image signals }}

{{Spec | Intermod Rejection | Intermod signals are reduced by the preselector selectivity over conventional microwave diode response }}

{{Spec | Type of Receiver | Crystal linear or log video with sweeping YIG pre selector }}

{{Spec | Sensitivity (1 KHz Bandwidth) | -45 dBm minimum }}

{{Spec | Max. Input Power | +20 dBm }}

{{Spec | Limiting Level (2dB compression) | 0.7 - 1.0 GHz -20 dBm typical }}

{{Spec |  | 1.0 - 1.2 GHz >+5 dBm }}

{{Spec |  | 1.2 - 15.7 GHz >+10 dBm }}

{{Spec |  Log Accuracy (<1 MW Input) | ± 1 dB Typical }}

{{Spec | Variable Vertical Log Scale (dB/cm) | Variable and calibratable with internal calibrate signal over the range of 2 dB/cm to 20 dB/cm }}