1L5: Difference between revisions
mNo edit summary |
m (→top: clean up, replaced: {{Plugin Sidebar 2 → {{Plugin Sidebar | designers=, title=Tektronix → manufacturer=Tektronix | model=) |
||
| Line 1: | Line 1: | ||
{{Plugin Sidebar | {{Plugin Sidebar | designers=| | ||
manufacturer=Tektronix | model=1L5 | | |||
summary=1 MHz Spectrum Analyzer | | summary=1 MHz Spectrum Analyzer | | ||
image=Tek 1l5 front.JPG | | image=Tek 1l5 front.JPG | | ||
Revision as of 07:53, 9 August 2021
The Tektronix 1L5 is a low-frequency spectrum analyzer for 500-series scopes. It is very similar to the 3L5.
Its center frequency is set on a trio of rotary switches and can range from 50 Hz to 990 kHz. Minimum resolution bandwidth is 10 Hz. It has a 1 MΩ input resistance.
Type 1L5 was sold from 1967 until the end of the classic plug-in scope line. Not particularly accurate in either frequency, bandwidth, or amplitude, it was no match for HP's 141T/8556A/8552B combination in performance, but it was a small fraction of the price.
Although Type 1L5 can operate in any 500-series scope*, it is most useful by far in the Type 549 storage mainframe which allows slow sweeps needed to match the narrower resolution bandwidths.
In conjunction with the 015-0107-00 "Swept Frequency Generator" (tracking generator), the 1L5 can also measure frequency response.
* 531/535/541/545 need a wiring mod to alleviate vertical amp instability.
Pictures
-
-
-
-
-
-
549 works fine with 1L5
-
top
-
right
-
rear
-
left
-
front
-
bottom
-
1L5
-
Block Diagram
-
Attenuators and Input
-
Center Frequency Switching
-
Swept Frequency Generator
-
Variable Resolution Amplifier
-
Dispersion Warning Light
-
Output Amplifier
-
Calibrator
-
Interconnecting Plug and Power Distribution
-
Preproduction 1L5 (serial A01)
-
Preproduction 1L5 (serial A01)
-
Preproduction 1L5 (serial A01)
-
Measured frequency response of 3 MHz filter from P90 to P280 with Q290 removed to disable 3.1 MHz oscillator, but powered up. 10 dB/div.
-
Measured frequency response of 3 MHz filter. 1 dB/div.
