TDS2014: Difference between revisions

← Older edit

TDS2014 (view source)

Revision as of 08:45, 11 August 2021

37 bytes removed , 11 August 2021

m

→‎top: clean up, replaced: |manufacturer=Tektronix → |manufacturer=Tektronix |series=TDS series scopes

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

37,092

edits

@@ Line 1: / Line 1: @@
-{{Oscilloscope Sidebar |
+{{Oscilloscope Sidebar |manufacturer=Tektronix |series=TDS series scopes|designers= |
-title=Tektronix TDS2014 |
+model= TDS2014 |
 summary=Digital Storage 100 MHz 4-channel scope |
 image=TDS2014_Waveform_image.jpg |
@@ Line 14: / Line 14: @@
 * [[Media:TDS1000 AND TDS2000 SERIES FIRMWARE UPDATE.txt| TDS1000 AND TDS2000 Series Firmware Update Notice]] (786 B TXT)
 }}
-The '''Tektronix TDS2014''' is a four-channel, 100 MHz, 1 GS/s digital scope with a color LCD screen.  An External trigger input on front, and the rear mounted optional TDS2MEM Communication Module provides a CompactFlash card slot, Centronics-type printer port, RS-232, and GPIB rear ports for convenient inter-connectivity.
+The '''Tektronix TDS2014''' is a four-channel, 100 MHz, 1 GS/s digital scope with a color LCD screen.
-Easy access to the MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH3-CH4, CH4-CH3, CH1+CH2, CH3+CH4) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements.  Measurements can also be performed for time (frequency) and voltage (amplitude).  Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.
+An optional rear-mounted [[TDS2MEM]] Communication Module provides a CompactFlash card slot, [[GPIB]], [[RS-232]], and Centronics-type [[parallel printer interface]]s.
+Thee MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH3-CH4, CH4-CH3, CH1+CH2, CH3+CH4) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements.  Measurements can also be performed for time (frequency) and voltage (amplitude).  Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.
 Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, CH3, CH4, Ext and AC Line sources.
 {{BeginSpecs}}
@@ Line 33: / Line 33: @@
 {{EndSpecs}}
-==Pictures==
+{{MissingPics}}
-<gallery>
-</gallery>
-[[Category:TDS1000 series scopes]]
+[[Category:TDS2000 series scopes]]