AM501: Difference between revisions
Jaredcabot (talk | contribs) (Added link to 013-0146-00) |
No edit summary |
||
| Line 2: | Line 2: | ||
* [[Media:070-1616-01.pdf|AM501 Manual]] (PDF, 15MB) | * [[Media:070-1616-01.pdf|AM501 Manual]] (PDF, 15MB) | ||
}} | }} | ||
Also available was the accessory ''AM501 Auxiliary Circuit Board Kit'', Part number: [[013-0146-00]], described as | |||
Also available was the accessory | |||
<blockquote> | <blockquote> | ||
The AM501 Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The kit is a PC board has six terminal studs for attachment to the amplifier's banana jacks and is approximately 2.5-inches square. This permits the designer to build a circuit of resistors, capacitors, and other components for use in conjunction with the AM 501's input, output, or feedback circuits. With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier.<br> | The AM501 Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The kit is a PC board has six terminal studs for attachment to the amplifier's banana jacks and is approximately 2.5-inches square. This permits the designer to build a circuit of resistors, capacitors, and other components for use in conjunction with the AM 501's input, output, or feedback circuits. With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier.<br> | ||
Revision as of 12:26, 27 May 2022
The Tektronix AM501 is a 5 MHz operational amplifier plug-in for the TM500 system.
Also available was the accessory AM501 Auxiliary Circuit Board Kit, Part number: 013-0146-00, described as
The AM501 Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The kit is a PC board has six terminal studs for attachment to the amplifier's banana jacks and is approximately 2.5-inches square. This permits the designer to build a circuit of resistors, capacitors, and other components for use in conjunction with the AM 501's input, output, or feedback circuits. With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier.
An additional advantage of the kit is that it does not interfere with the other connectors on the face of the AM501.
Key Specifications
| Unity-gain bandwidth | >5 MHz into an 800 Ω load |
|---|---|
| Open-loop gain | >10000 into an 800 Ω load |
| CMRR | >10000:1 at 60 Hz |
| Common-mode input range | ±40 V |
| Maximum input | 80 V max. safe differential |
| Slew Rate | >50 V/μs into an 800 Ω load |
| Output voltage | > ±40 V |
| Output current | > ±50 mA |
