317: Difference between revisions

← Older edit

317 (view source)

Revision as of 11:18, 21 September 2023

422 bytes added , 21 September 2023

no edit summary

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

40,987

edits

@@ Line 1: / Line 1: @@
-{{Oscilloscope Sidebar |
+{{Oscilloscope Sidebar
-title=Tektronix 317 |
+|manufacturer=Tektronix
-summary=10 MHz 3" tube scope|
+|series=300-series scopes
-image=Tek 317 trace bright.jpg|
+|model=317
-caption=Tek 317 |
+|summary=10 MHz 3" tube scope
-introduced=1959 |
+|image=Tek 317 trace bright.jpg
-discontinued=1972 |
+|caption=Tek 317
-manuals=
+|introduced=1959
-* [http://w140.com/mmm/tek-317.pdf Tektronix Type 317 Manual (PDF)]
+|discontinued=1972
-* [http://bama.edebris.com/manuals/tek/317/ Tektronix 317 Manual (DJVU, BAMA, offline?)]
+|designers=
-* [http://w140.com/tek_fcp/tek_type_317_factory_cal_proc.pdf Tektronix 317 Factory Calibration Procedure (PDF)]
+|manuals=
+* [[Media:070-297.pdf|Tektronix Type 317 Manual]]<br /><small>[https://bama.edebris.com/manuals/tek/317/ Tektronix 317 Manual] (DJVU @ BAMA)</small>
+* [[Media:070-325.pdf|Tektronix RM17 Manual]]
-* [[Media:tek_317_fcp.pdf|Tektronix 317 Factory Calibration Procedure (PDF, OCR)]]
+* [[Media:tek_317_fcp.pdf|Tektronix 317 Factory Calibration Procedure]] (OCR)
+* [[Media:Tek 317 fcp dec 1968.pdf|Tektronix 317 Factory Calibration Procedure, Dec. 1968]]
+* [[Media:tek_317_irb.pdf|Tektronix 317 Instrument Reference Book]] (OCR)
 }}
-The '''Tektronix 317''', [[introduced in 1959]], is similar to the [[316]],
+The '''Tektronix 317''', [[introduced in 1959]], is a monolithic 10 MHz scope similar to the [[316]], but with higher acceleration voltage (9 kV versus 1.8 kV) on the CRT.
-but with higher acceleration voltage (9 kV versus 1.8 kV) on the CRT.
+It was intended for use where a bright display is needed. There is also a rackmount version, the '''RM17'''.
-It was intended for use where a bright display is needed.
-The 317 initially used [[UHF connector]]s for the signal input and calibrator output;
-later units use [[BNC connector]]s.
-There is also a rackmount version, the RM17.
+The 317 initially used [[UHF connector]]s for the signal input and calibrator output; later units use [[BNC connector]]s.
 Type 317 Mod 101 operates on 50 to 400 Hz power and uses a DC fan motor.
-The 317 uses the [[T317|T317 CRT (154-0346-00)]].
+{{BeginSpecs}}
+{{Spec | Deflection | 0.1 V/div to 50 V/div, 1−2−5, and variable }}
-==Specifications==
+{{Spec | Bandwidth | DC to 10 MHz (50/20/10 mV/div AC only) }}
-* one vertical channel
+{{Spec | Rise time | 35 ns }}
-* calibrated vertical deflection factors from 0.1 V/div to 50 V/div
+{{Spec | Input impedance | 1 MΩ // 38 pF }}
-* DC to 10 MHz frequency response, 35 ns risetime)
+{{Spec | Sweep | 200 ns/div to 2 s/div, 1−2−5, and variable }}
-* 0.01 V/div in AC-coupled mode
+{{Spec | CRT | [[T317|T317 CRT (154-0346-00)]], 9 kV acceleration}}
-* 38 pF input capacitance
+{{EndSpecs}}
-* horizontal sweep rates from 2 sec/div to 0.2  μs/div
 ==Links==
@@ Line 37: / Line 37: @@
 ==Pictures==
+===317===
 <gallery>
 Tek 317 front.jpg
@@ Line 44: / Line 45: @@
 Tek 317 underside.jpg
 Tek 317 rear.jpg
-Tek rm17.jpg|RM17
 w camera mount.jpg|317 with camera mount
 Tek 317 early.jpg|early 317 with leather handle
@@ Line 55: / Line 55: @@
 Tek 317 lyons 4.jpg
 Tek 317 lyons 5.jpg
+Tek 317 close trace.jpg|trace
+</gallery>
+===RM17===
+<gallery>
 Tek rm17 2.jpg|RM17
 Tek rm17 rear.jpg|RM17
+Tek rm17.jpg|RM17
+Tek rm17 front.jpg|RM17 front
+Tek rm17 trace.jpg|RM17 trace
+Tek rm17 top.jpg|RM17 top internal
 </gallery>
+==Components==
+{{Parts|317}}
 [[Category:Monolithic tube scopes]]