38,913
edits
No edit summary |
No edit summary |
||
(89 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
{{Oscilloscope Sidebar| | {{Oscilloscope Sidebar | ||
|manufacturer=Tektronix | |||
image=Tek-585- | |series=580-series scopes | ||
caption=Tektronix 585 | | |model=585 | ||
introduced=1959 | | |image=Tek-585-82.jpg | ||
discontinued=1972 | | |caption=Tektronix 585 with [[82|Type 82]] plug-in | ||
summary= | |introduced=1959 | ||
manuals= | |discontinued=1972 | ||
* [ | |summary=100 (95) MHz oscilloscope | ||
* [ | |designers=John Gates; | ||
* [ | |manuals= | ||
* [[Media:070-171.pdf|Tektronix 585 Manual]] (OCR) | |||
* [[Media:070-0391-01.pdf|Tektronix 585A Manual]] | |||
* ''[[Media:070-392.pdf|070-392 RM585A Manual needed]]'' | |||
* [[Media:070-427.pdf|Tektronix 585A Operator's Manual]] (4"×5") | |||
<small> | |||
'''Calibration''' | |||
* [[Media:Service Scope 39 Aug 1966.pdf|580 series gain adjustment procedure, in Service Scope 39, Aug 1966]] | * [[Media:Service Scope 39 Aug 1966.pdf|580 series gain adjustment procedure, in Service Scope 39, Aug 1966]] | ||
* [ | * [https://w140.com/tek_fcp/tek_585_fac_cal.pdf Tektronix 585 Factory Calibration Procedure, June 1961] | ||
* [[Media:Tek 585a fcp nov 1968.pdf|Tektronix 585A Factor Calibration Procedure, November 1968]] | |||
'''Modifications''' | |||
* [https://web.archive.org/web/20170727004536/http://www.reprise.com/host/tektronix/reference/581_relay.asp Power supply Mod (From Stan's website, archived)] | |||
</small> | |||
}} | }} | ||
The '''Tektronix 585''' is a 100 MHz [[580-series scopes|580-Series scope]] that Tektronix [[introduced in 1959]]. | The '''Tektronix 585''' is a 100 MHz [[580-series scopes|580-Series scope]] that Tektronix [[introduced in 1959]]. | ||
The 585A facelift model was introduced in 1963 and discontinued after 1971. | It was designed by [[John Gates]]. | ||
The [[581]] is the same with a single timebase. | |||
The 585A facelift model was introduced in 1963 and discontinued after 1971. | |||
The 58x series were the first Tek scopes with [[distributed deflection plates]], the first Tek scopes to use a cross-wound continuous delay line, and the last with a [[distributed amplifier]]. | |||
At 100 MHz ( | At 100 MHz (down-rated to 95 MHz in 1962 and 85 MHz for the 585A in 1963) with the [[80|Type 80 plug-in]] and up to 85 MHz with the dual-channel [[82|Type 82]], they were the highest-speed general purpose scopes of Tek's tube scope era. (The 1 GHz [[519]] was specialized with no vertical amplifier.) | ||
The 585's front panel layout is almost identical to the [[545A]] that came out at the same time. The 585 also shares internal construction and circuits such as the power supply with the [[535]]/[[545]] line of scopes. | The 585's front panel layout is almost identical to the [[545A]] that came out at the same time. The 585 also shares internal construction and circuits such as the power supply with the [[535]]/[[545]] line of scopes. | ||
__TOC__ | |||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Rise time | 3.5 ns with [[80 | Type 80]] plugin and [[P80|P80 probe]] }} | {{Spec | Rise time | 3.5 ns with [[80 | Type 80]] plugin and [[P80|P80 probe]] }} | ||
{{Spec | | {{Spec | Timebase A | 50 ns/Div to 2 s/Div, 1−2−5, variable ×2.5, magnifier ×5, single sweep; X input }} | ||
{{Spec | Timebase B | 2 μs/Div to 1 s/Div, 1−2−5, can delay timebase A by 1 μs to 10 s }} | {{Spec | Timebase B | 2 μs/Div to 1 s/Div, 1−2−5, can delay timebase A by 1 μs to 10 s }} | ||
{{Spec | CRT | [[T581]], distributed vertical deflection plates, 10 kV acceleration }} | {{Spec | CRT | [[T581]], distributed vertical deflection plates, 10 kV acceleration }} | ||
{{Spec | Outputs | A Sawtooth, A Gate, B Gate, Calibrator (0.2 mV to 100 V<sub>p-p</sub>, 1−2−5) }} | {{Spec | Outputs | A Sawtooth, A Gate, B Gate, Calibrator (0.2 mV to 100 V<sub>p-p</sub>, 1−2−5) }} | ||
{{Spec | Power | 107−127 or 214−234 V<sub>AC</sub>, 50-60 Hz, 890 VA / 710 W}} | |||
{{Spec | Dimensions | (W/L/H) 330×610×432 mm³ (13"×24"×17") }} | |||
{{EndSpecs}} | {{EndSpecs}} | ||
==585A differences== | ==585A differences== | ||
The 585A uses a tunnel-diode trigger circuit (see below), adds HF Sync and AC LF reject modes to the timebase A trigger selector, and adds a [[trace rotation]] coil. | The 585A uses a tunnel-diode trigger circuit (see below), adds HF Sync and AC LF reject modes to the timebase A trigger selector, and adds a [[trace rotation]] coil. | ||
==Links== | |||
* [https://www.radiomuseum.org/r/tektronix_crt_oscilloscope_585.html Tek 585] @ radiomuseum.org | |||
* [https://youtube.com/watch?v=RvemavylsCI Inside a Tek 585A] @ YouTube | |||
==History== | |||
[https://vintagetek.org/my-early-tektronix-days-by-john-kobbe-2/ John Kobbe said]: | |||
<blockquote> | |||
Later on there was another special CRT designed with [[distributed deflection plates|distributed vertical deflection]] for the 100 Megahertz 580 (well almost 100 MHz). | |||
The 580 was the first, at least at Tek, to use a cross wound continuous signal [[delay line]]. | |||
The 580 used a similar horizontal system lifted from the 530s which was too slow and [had] insufficient writing rate. | |||
The [[P80|active probe]] and [[580 Series plug-in interface|plug in system]] left a lot to be desired. I wasn’t very proud of the 580 design as it was too compromised. | |||
</blockquote> | |||
==Internals== | ==Internals== | ||
=== Plug-in Interface === | === Plug-in Interface === | ||
The 585 uses [[580-series plug-ins]] which look like [[letter-series and 1-series plug-ins]] | The 585 uses [[580-series plug-ins]] which look like [[letter-series and 1-series plug-ins]] | ||
but are electrically different. | but are electrically different. The main difference is the impedance of the signal that passes | ||
The main difference is the impedance of the signal that passes | |||
through the interface from the plug-in to the mainframe. | through the interface from the plug-in to the mainframe. | ||
In 530/540/550-series scopes, the plug-in expects the mainframe to be a high impedance load | |||
In 530/540/550-series scopes, the plug-in expects the mainframe to be a high impedance load, | |||
driving tube grids in the mainframe. | |||
The [[580 Series plug-in interface]], on the other hand, presents a differential transmission line | |||
input with an impedance of 93 Ω per side, going into the first distributed amplifier stage. The | |||
other end of this transmission line is returned to the plug-in for termination and biasing. | |||
The [[580 Series plug-in interface|pin-out of the interface connector]] is also different, | The [[580 Series plug-in interface|pin-out of the interface connector]] is also different, | ||
the 580-series pin-out being essentially flipped 180° from its | the 580-series pin-out being essentially flipped 180° from its 530/540/550 series counterparts | ||
530/540/550 series counterparts (''Signal Out'' is between pins 14 and 16 as opposed to between pins 1 and 3, etc.) | (''Signal Out'' is between pins 14 and 16 as opposed to between pins 1 and 3, etc.) | ||
The [[81|Type 81]] adapter allows the use of letter-series and 1-series plug-ins in a 585. | The [[81|Type 81]] adapter allows the use of letter-series and 1-series plug-ins in a 585. | ||
Line 51: | Line 87: | ||
made of a pair of miniature dual triode tubes. | made of a pair of miniature dual triode tubes. | ||
Starting at serial number 1071, the | Starting at serial number 1071 (and sometimes retrofitted to earlier instruments), the dual-triode | ||
10 mA [[tunnel diodes|tunnel diode]] | Schmitt trigger circuit was replaced by an [[STD615]] 10 mA [[tunnel diodes|tunnel diode]] AC-coupled to the base-emitter junction of an [[OC171]] germanium PNP transistor as a pulse amplifier. | ||
transistor. The | |||
The slower "B" timebase uses a Schmitt trigger circuit. | |||
=== Vertical Signal Path === | === Vertical Signal Path === | ||
Like the [[545]], [[551]], and [[555]], the 585 uses two [[distributed amplifier]]s in the vertical | Like the [[545]], [[551]], and [[555]], the 585 uses two [[distributed amplifier]]s in the vertical signal path, one with seven differential [[6DJ8]] stages driving a helically-wound, differential [[delay line]], followed by a five-stage differential distributed driver amplifier and a [[7699]] or [[6939]] dual tetrode power stage driving the CRT. | ||
signal path, one with seven differential [[6DJ8]] stages driving a helically-wound, differential [[delay line]], | |||
followed by a five-stage differential distributed driver amplifier and a [[7699]] power stage driving the CRT. | |||
Unlike the other 500-series scopes, the 585 uses a CRT with [[distributed vertical deflection plates]], | Unlike the other 500-series scopes, the 585 uses a CRT with [[distributed vertical deflection plates]], the [[T581]], enabling it to have both fast rise time and high sensitivity (~5 V/cm vertically), albeit at the cost of limiting vertical deflection to slightly over 4 cm. Total acceleration voltage is 10 kV. | ||
the [[T581]], enabling it to have both high sensitivity | |||
Several improvements were published for the 585 circuitry, including the enhanced trigger circuit. | Several improvements were published for the 585 circuitry, including the enhanced trigger circuit. | ||
If all of those changes are applied to a 585, it is essentially a 585A. | If all of those changes are applied to a 585, it is essentially a 585A. | ||
After serial number 2585, the back termination of the final distributed amplifier output was made adjustable. | |||
The manual says this (field-installable) modification (040-275) is "required for proper operation of plug-ins with numbers above [[81|Type 81]]". Non-A instruments with this termination have a front panel label reading "standardized vertical". | |||
===Power Supply=== | ===Power Supply=== | ||
The 585 power supply is similar to other Tek scopes of the era such as the [[549]]. A linear regulator with a [[5651]] reference tube, a [[12AX7]]/[[6AU6]] error amplifier and three parallel [[12B4]] series pass tubes produces −150 V. This is the only adjustable rail, all other regulated voltages are referenced to it. The +100 V and +350 V regulators use half a [[6080]] each as the pass element, the +225 V two. In the +500 V path, a [[12B4]] performs this function. The unregulated +325 V input to the 225 V | The 585 power supply is similar to other Tek scopes of the era such as the [[549]]. A linear regulator with a [[5651]] reference tube, a [[12AX7]]/[[6AU6]] error amplifier and three parallel [[12B4]] series pass tubes produces −150 V. | ||
This is the only adjustable rail, all other regulated voltages are referenced to it. | |||
The +100 V and +350 V regulators use half a [[6080]] each as the pass element, the +225 V two. | |||
In the +500 V path, a [[12B4]] performs this function. | |||
The unregulated +325 V input to the 225 V regulator is used to supply the HV oscillator, a [[6AU5]]. | |||
A transistor-based regulator supplies a +12.6 V heater voltage to the plug-in. | A transistor-based regulator supplies a +12.6 V heater voltage to the plug-in. | ||
A [[delay relay| | A [[delay relay|6NO45 delay relay]] controls a multi-contact relay to switch supply voltages on only after the tubes are warmed up. | ||
When the main relay engages, the delay relay is cut out so it will be ready to delay again even after a quick interrupt in power input. | |||
The 12.6 V power supply is referenced to the +100 V regulated output. Since +100 V is not available during the warm-up period, an unregulated +100 V (~+180 V) is fed as the reference to the 12.6 V power supply during the warm-up period, then cut out by the multi-contact relay post warmup. | |||
The 585 contains a 53°C (128°F) [[thermal cutoff]]. | The 585 contains a 53°C (128°F) [[thermal cutoff]]. | ||
The power transformer, T601, is Tektronix part number [[120-0141-00]]. | |||
===Semiconductors=== | ===Semiconductors=== | ||
The 585 uses semiconductor diodes as rectifiers and | The 585 uses semiconductor diodes as rectifiers and germanium transistors in the 12.6 V power supply, and except for unmodified instruments before SN 1070, a tunnel diode and another germanium transistor in the time base A trigger circuit. | ||
=== Rackmount Versions === | === Rackmount Versions === | ||
Rackmount versions were also made, the RM585 and RM585A. | Rackmount versions were also made, the RM585 and RM585A. | ||
===Circuit Variants=== | |||
{| class="wikitable" | |||
<!-- Header --> | |||
! colspan="3" | Some changes across 585 and 585A | |||
|- | |||
! | |||
! 585 | |||
! 585A | |||
<!-- End Header --> | |||
<!-- Start section --> | |||
|-style="background-color:#ffffff;" | |||
! rowspan="2" | A-Trigger | |||
| SN up to 1070 | |||
*[[6EW6]] Trigger comparator. | |||
*[[6DJ8]] Trigger multivibrator | |||
| rowspan="2" | | |||
*Tunnel diode trigger | |||
*PNP trigger amplifier [[2N2048]] | |||
|-style="background-color:#ffffff;" | |||
| SN 1071 up | |||
*Tunnel diode trigger | |||
*PNP trigger amplifier [[OC171]] | |||
<!-- End Section --> | |||
<!-- Start section --> | |||
|- | |||
!Sweep Generator | |||
| Standard | |||
| SN 120000 up | |||
D152/252 added to [[6AL5]] disconnect diodes | |||
<!-- End section --> | |||
<!-- Start section --> | |||
|-style="background-color:#ffffff;" | |||
! rowspan="2"| 12.6 V Power | |||
| SN up to 3762 | |||
*Used for plug-in | |||
*Selenium rectifier | |||
| rowspan="2" | | |||
*Used for plug-in and vertical amplifier heaters | |||
*SN 6580 up Fused | |||
|-style="background-color:#ffffff;" | |||
| SN 3763 up | |||
*Used for plug-in and vertical amplifier heaters | |||
*Minor design changes from earlier SN | |||
<!-- End Section --> | |||
<!-- Start section --> | |||
|- | |||
! rowspan="2"| Vertical amplifier | |||
grid/plate line fuses | |||
| SN up to 3762: No Fuse | |||
| rowspan="2" | Fused | |||
|- | |||
| SN 3763 up: Added F1210, F1260, F1285 | |||
<!-- End Section --> | |||
<!-- Start section --> | |||
|-style="background-color:#ffffff;" | |||
! rowspan="2"| Delay Relay | |||
| rowspan="2"| [[6NO45]] | |||
*Heater power from unregulated 18 V DC | |||
* 33 Ω dropping resistor. | |||
| SN up to 9179 | |||
*[[6NO45]] | |||
*Heater power from unregulated 18 V DC | |||
* 33 Ω dropping resistor. | |||
|-style="background-color:#ffffff;" | |||
| SN 9180 up | |||
*[[18NO30]] | |||
*Heater power from unregulated 18 V DC | |||
|- | |||
<!-- End Section --> | |||
<!-- Start section --> | |||
|- | |||
! Trace Rotation | |||
| Not present | |||
| SN 9000 up: Added trace rotation | |||
|- | |||
<!-- End Section --> | |||
<!-- Start section --> | |||
|-style="background-color:#ffffff;" | |||
! Final vertical power amp | |||
| [[6939]]/AX193/7699 dual tetrode | |||
| 2 × [[7788]] Pentode | |||
|- | |||
<!-- End Section --> | |||
<!-- Start section --> | |||
|- | |||
! Power supply Mod | |||
| None | |||
| SN 9250 up: Main relay K601-4 relocated [http://web.archive.org/web/20170727004536/http://www.reprise.com/host/tektronix/reference/581_relay.asp Details] | |||
|- | |||
<!-- End Section --> | |||
! colspan="3" |SN Range not applicable for rack-mount models | |||
|- | |||
|} | |||
==Prices== | ==Prices== | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| | | colspan="2" | | ||
| colspan="2" align="center" | 585 | | colspan="2" align="center" | 585 | ||
| colspan=" | | colspan="5" align="center" | 585A | ||
|- | |- | ||
! Year | ! colspan="2" | Year | ||
! 1959 | ! 1959 | ||
! 1962 | ! 1962 | ||
! 1963 | ! 1963 | ||
! 1965 | ! 1965 | ||
! 1971 | ! 1969 | ||
! 1971* | |||
! 1972* | |||
|- | |- | ||
! Catalog | ! rowspan="2"| mainframe only | ||
| Catalog Price | |||
|align=right| $1,675 | |align=right| $1,675 | ||
|align=right| $1,725 | |align=right| $1,725 | ||
|align=right| $1,725 | |align=right| $1,725 | ||
|align=right| $1,725 | |align=right| $1,725 | ||
|align=right| $1,800 | |||
|align=right| $2,400 | |align=right| $2,400 | ||
|align=right| $2,600 | |||
|- | |||
| In 2023 Dollars | |||
|align=right| $17,200 | |||
|align=right| $17,600 | |||
|align=right| $17,300 | |||
|align=right| $16,800 | |||
|align=right| $15,100 | |||
|align=right| $18,200 | |||
|align=right| $19,100 | |||
|- | |- | ||
! | ! rowspan="2"| mainframe+[[80]]+[[P80]] | ||
|align=right| $ | | Catalog Price | ||
|align=right| $ | |align=right| $1,825 | ||
|align=right| $ | |align=right| $1,875 | ||
|align=right| $ | |align=right| $1,975 | ||
|align=right| $ | |- | ||
| In 2023 Dollars | |||
|align=right| $19,300 | |||
|align=right| $19,100 | |||
|align=right| $19,900 | |||
|- | |||
! rowspan="2"| mainframe+[[82]] | |||
| Catalog Price | |||
| | |||
| | |||
| | |||
|align=right| $2,375 | |||
|align=right| $2,575 | |||
|align=right| $3,325 | |||
|align=right| $3,600 | |||
|- | |||
| In 2023 Dollars | |||
| | |||
| | |||
| | |||
|align=right| $23,200 | |||
|align=right| $21,600 | |||
|align=right| $25,300 | |||
|align=right| $26,500 | |||
|- | |||
! rowspan="2"| mainframe+[[86]]+[[P6008]] | |||
| Catalog Price | |||
| | |||
| | |||
| | |||
|align=right| $2,075 | |||
|align=right| $2,185 | |||
| | |||
| | |||
|- | |||
| In 2023 Dollars | |||
| | |||
| | |||
| | |||
|align=right| $20,300 | |||
|align=right| $18,300 | |||
| | |||
| | |||
|} | |} | ||
:''* "limited demand" instrument'' | |||
==Pictures== | ==Pictures== | ||
===585 non-A=== | ===585 non-A=== | ||
<gallery> | <gallery> | ||
Tek-585-81-ca-front.jpg | 585 with [[81|Type 81 Adapter]] and [[CA|Type CA plug-in]] | Tek-585-81-ca-front.jpg | 585 with [[81|Type 81 Adapter]] and [[CA|Type CA plug-in]] | ||
Tek 585 with 82.jpg | 585 with [[82|Type 82]] | Tek-585-80.jpg | 585 with [[80|Type 80 plug-in]] | ||
Tek585-bottom.jpg | 585 bottom view | Tek-585-82.jpg | 585 with [[82|Type 82 plug-in]] | ||
Tek 585 with 82.jpg | 585 with [[82|Type 82 plug-in]] | |||
Tek 585 non A Field Modification 040-275 label.jpg | Front panel label indicating Field Modification 040-275 is applied | |||
</gallery> | |||
===585 non-A Internals=== | |||
<gallery> | |||
Tek585-bottom.jpg | 585 bottom view (with [[81|Type 81 Adapter]] and [[CA|Type CA plug-in]]) | |||
Tek585-dl-driver-1.jpg | Distributed delay line driver amplifier | Tek585-dl-driver-1.jpg | Distributed delay line driver amplifier | ||
Tek585-dl-driver-bot.jpg | Distributed delay line driver amplifier (bottom). Plug-in interface connector to the left. | Tek585-dl-driver-bot.jpg | Distributed delay line driver amplifier (bottom). Plug-in interface connector to the left. | ||
Tek585-left-1.jpg | 585 left side | Tek585-left-1.jpg | 585 left side | ||
Tek585-vert-1.jpg | Vertical amplifier (post-delay 5-stage distributed amplifier) | Tek585-vert-1.jpg | Vertical amplifier (post-delay 5-stage distributed amplifier). Pre-SN 2585 fixed termination. | ||
Tek585-vert-2.jpg | Vertical amplifier (5-stage dist amp, power output stage) | Tek585-vert-2.jpg | Vertical amplifier (5-stage dist amp, power output stage) | ||
Tek585-rect.jpg | Rectifiers | Tek585-rect.jpg | Rectifiers | ||
Line 127: | Line 339: | ||
Tek585-top-1.jpg | 585 top view | Tek585-top-1.jpg | 585 top view | ||
Tek585-top-rear.jpg | 585 rear from above, handle and HV cover removed | Tek585-top-rear.jpg | 585 rear from above, handle and HV cover removed | ||
585 HV - Black Beauty.jpg| "[[Bumble Bee capacitors|Black Beauty]]" capacitors (leaky!) in original HV circuit | |||
585 HV - recapped.jpg | HV circuit re-capped with modern ceramic 10 nF / 3 kV caps | |||
Tek-585-psu-2.jpg | [[6080]] (large tube) and [[12B4]] pass elements in PSU | Tek-585-psu-2.jpg | [[6080]] (large tube) and [[12B4]] pass elements in PSU | ||
585-distamp-operating.jpg| 585 delay line driver distributed amplifier in operation | |||
585-psu-operating.jpg | 585 power supply (center) and timebase B (left) in operation | |||
585-150ns-100hz.jpg | 585 displaying a ~150 ns pulse at 100 Hz repetition rate at fastest timebase setting | |||
585_cyclist.jpg | Cyclist cartoon in horizontal amplifier schematic | |||
Tek 585 lvps.png | Tektronix 585 Low Voltage Power Supply Schematic | |||
</gallery> | </gallery> | ||
Line 133: | Line 352: | ||
<gallery> | <gallery> | ||
Tek 585a trace.jpg | Tek 585a trace.jpg | ||
585a_front.jpg|585A with [[82]] | 585a_front.jpg | 585A with [[82]] | ||
Tek 585 upgraded to 585a.jpg | 585 with TRIGGER SOURCE switch upgraded to 585A design | |||
Wellenkino 585a 2.jpg | Wellenkino 585a 2.jpg | ||
Wellenkino 585A.jpg | Wellenkino 585A.jpg | ||
Tek 585a sine trace.jpg | Tek 585a sine trace.jpg | ||
Tek 585a square trace.jpg | Tek 585a square trace.jpg | ||
Tek 585a with 81a and hickok plugin.jpg | 585A with [[81|81A]] and Hickok plug-in | |||
Tek 585a with 81a and hickok plugin.jpg|585A with [[81|81A]] and Hickok plug-in | |||
Tek 585a handbook.jpg | Tek 585a handbook.jpg | ||
Tek 58x direct crt.png|Direct Connection to CRT (from 1964 Service Scope) | </gallery> | ||
===585A Internals=== | |||
<gallery> | |||
Tek 585a right internal on cart.jpg | 585A on cart | |||
585a_delay1.jpg | 585A delay line | |||
585_delay2.jpg | 585A delay line | |||
585_delay3.jpg | 585A delay line | |||
585a_trig.jpg | 585A trigger circuit | |||
585a_trig_td2.jpg | White plastic clip holds tunnel diode for triggering | |||
585a_door_open.jpg | Inside view shows regulator tubes | |||
585a_dist_vert amp.jpg | Distributed vertical amplifier | |||
T580_CRT.JPG | [[T581]]0P31 distributed deflection plates | |||
Tek_154-0479-00-dDePlates.jpeg | [[T581]]0P31 distributed deflection plates | |||
Tek 58x direct crt.png | Direct Connection to CRT (from 1964 Service Scope) | |||
</gallery> | </gallery> | ||
Line 156: | Line 379: | ||
<gallery> | <gallery> | ||
Rm 585a.jpg|RM-585A | Rm 585a.jpg|RM-585A | ||
Tek_RM585A-Front.jpeg | RM585A - ALT/DLYD' Trigger | |||
Tek_RM585A-Back.jpeg | RM585A - Rear | |||
</gallery> | |||
===RM585A Internals=== | |||
<gallery> | |||
Tek_RM585A_Int_LHSjpeg.jpeg | RM585A Internal LHS | |||
Tek_RM585A_Int_Underside.jpeg | RM585A Internal underside | |||
Tek_RM585A_Int_Underside-TimeBaseOpen.jpeg | RM585A Internal Underside - Timebase door open | |||
Tek_RM585A_Int_Top-Dline-open.jpeg | RM585A Top - Internal- Delay line door open | |||
Tek_RM585A_Int_Top.jpeg | RM585A - Internal top | |||
Tek_RM585A_Int_RHS.jpeg | RM585A Internal RHS | |||
Tek_RM585A_Int_HV.jpeg | RM585A Internal HV Section | |||
Tek_RM585A_Int_Rear.jpeg | RM585A Internal - Rear | |||
Tek_585A_VOutput-Tubes.jpeg | RM585A Internal - Vamp - Output [[7788]] pair | |||
RM585A_12.6V-Recrifier.jpeg | 12.6 V rail silicon diode rectifier with fuse | |||
RM585A_T44-Trigger-Transformer.jpeg | T44 - Trigger coupling transformer (Tunnel diode trigger) | |||
RM585A_12.6V-regulator.jpeg | 12.6 V rail regulator transistors | |||
RM585A_18V-delayrelay.jpeg | Delay relay 18NO30T | |||
Tek_585A_Trigger-Amp-transistor.jpeg | Trigger amplifier transistor 2N2048 | |||
Tek_585A_Vamp-Plate-Line-Termination.jpeg | Plate line termination (post deflection plates) | |||
Tek_585A_T1046-transformer.jpeg | T1046 toroid transformer in V-amp, used as phase correction/common mode choke | |||
Tek_585A_Grid_Line.jpeg | Tek 585A V-amp grid line (Delay Line driver stage) | |||
Tek_585A_Plate_Line.jpeg | Tek 585A plate line (partial, delay Line driver stage) | |||
Tek_585A_Tunnel-trig.jpeg | Tunnel diode in A-trigger (closeup) | |||
</gallery> | </gallery> | ||
==Components== | |||
{{Parts|585}} | |||
{{Parts|585A}} | |||
{{Plugins|580-series scopes}} | |||
[[Category:580 series scopes]] | [[Category:580 series scopes]] |