P6013A: Difference between revisions

Latest revision as of 03:37, 12 March 2024

Tektronix P6013
25 MHz ×1000 HV probe Tektronix P6013A Compatible with 1 MΩ scope inputs Produced from 1966 to (?) Manuals Tektronix P6013A Manual (OCR) Tektronix P6013A Factory Calibration Procedure

The Tektronix P6013A is a ×1000 high-voltage oscilloscope probe, an update of the earlier P6013.

Input impedance	100 MΩ // 3 pF
Attenuation	1000 : 1
Rise time	14 ns (specified with 545B and Type K)
Bandwidth	25 MHz
Input voltage	12 kV max. DC+peak AC (derate above 100 kHz)
Output	UHF or BNC connector, no readout pin

(no results)

@@ Line 2: / Line 2: @@
 |manufacturer=Tektronix
 |model=P6013
-|summary=25 MHz, ×1000, HV probe
+|summary=25 MHz ×1000 HV probe
 |image=P6013a-1.jpg
 |caption=Tektronix P6013A
@@ Line 12: / Line 12: @@
 * [[Media:Tek p6013a fcp without cover page.pdf|Tektronix P6013A Factory Calibration Procedure]]
 }}
-The '''Tektronix P6013A''' is a ×1000, high-voltage oscilloscope probe, an update of the earlier [[P6013]].
+The '''Tektronix P6013A''' is a ×1000 high-voltage oscilloscope probe, an update of the earlier [[P6013]].
 {{BeginSpecs}}
 {{Spec | Input impedance | 100 MΩ // 3 pF }}
-{{Spec | Attenuation     | 1 : 1000 }}
+{{Spec | Attenuation     | 1000 : 1 }}
 {{Spec | Rise time       | 14 ns (specified with [[545B]] and [[K|Type K]]) }}
 {{Spec | Bandwidth       | 25 MHz }}
-{{Spec | Input voltage   | 12 kV maximum, derate above 100 kHz }}
+{{Spec | Input voltage   | 12 kV max. DC+peak AC (derate above 100 kHz) }}
-{{Spec | Connector       | [[UHF connector|UHF]] or [[BNC connector|BNC]], no readout pin }}
+{{Spec | Output          | [[UHF connector|UHF]] or [[BNC connector]], no readout pin }}
 {{EndSpecs}}