TekWiki

Microprocessor support table: Difference between revisions

Page Discussion Repairs

Microprocessor support table (view source)

Revision as of 14:45, 3 October 2024

2,728 bytes added ,  3 October
→‎Tektronix 3001 GPX
No edit summary
 
(49 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<!--IN PROGRESS!-->
These tables describe the configurations necessary for specific microprocessors on Tektronix logic analyzers.<br>
This is the Tektronix microprocessor support table. It gives the configurations for the cards, probes and software cartridges for disassembly of microprocessor instructions on Tektronix logic analyzers.
Those analyzers not providing any specific target support (i.e. connection, disassembly) are listed as a matter of chronology and convenience for the reader.


An "X" means that the option is not applicable, a "?" means that no information is available or it hasn't been found and "NA" means that the probe is not available.
"N/A" means that the option is not applicable; "?" means that no information has been found to date.


"Max" means that it supports the maximum speed for the processor.
"Max" means that it supports the maximum speed for the processor.
==Tektronix [[1240]]/[[1241]]==
 
==Tektronix [[7D01]]==
 
*Introduced 1977
*No microprocessor support.
 
==Sony/Tektronix [[308]] Data Analyzer==
 
*Introduced 1980
*No microprocessor support
 
==Tektronix [[7D02]]==
Note:
Note:
*All acquisition boards are [[1240D2]] the [[1240D1]] cannot be used.
* The [[PM101]] is a general purpose probe, it can be defined to work with processors not listed here.
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
* "FM" stands for Full mnemonic disassembly.
*(*1) means that [[P6460]] probes are always required.
* "STD" stands for Standard radices (Hex, Bin, Octal).
*(*2) means that [[P6460]] probes are required for CMOS version.
* In production 1981-1984.
*(*3) means that [[P6460]] or [[P6462]] probes can be used.
*PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.
{| class="wikitable"
{| class="wikitable"
|[[File:Tektronix 1240 front panel.jpeg|140px|]]
|[[File:Tektronix_7D02.jpg|140px|]]
| colspan="7" style="text-align: center; font-weight:bold;" | Tektronix [[1240]]/[[1241]] ROM pack and configuration table
! colspan="5" style="text-align: center; font-weight:bold; background-color:#efefef;" | Tektronix [[7D02]]
|-
|-
! Microprocessor
! Microprocessor
! IC package
! Support Feature
! ROM pack
! Probe adapter
! Probe adapter
! Acq. boards required
! Requires
! Acq. probes required
! Fastest clock supported
! Fastest clock supported
|-
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Intel
| colspan="5" style="font-style:italic; background-color:#efefef;" | Intel
|-
|-
| [[Intel 8080|8080]]
| 8031
|
| style="text-align: center;" | STD
| style="text-align: center;" | [[12RM01]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | X
| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
| style="text-align: center;" | 2
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
|-
| [[Intel 8051|8031/8051]]
| 8035
|
| style="text-align: center;" | STD
| style="text-align: center;" | [[12RM99]] Opt 03
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | 2
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 4*1
| style="text-align: center;" | 12 MHz
|-
|-
| [[Intel 8085|8085]]
| 8039
|
| style="text-align: center;" | STD
| style="text-align: center;" | [[12RM02]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | X
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | 2
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
|-
| [[Intel 8086|8086]]
| 8048
| DIP
| style="text-align: center;" | STD
| style="text-align: center;" | [[12RM03]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM201]]
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | 3
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | X
| style="text-align: center;" | 8.0 MHz
|-
|-
| [[Intel 8086|8088]]
| 8049
| DIP
| style="text-align: center;" | STD
| style="text-align: center;" | [[12RM04]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM201]]
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | 3
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | X
|-
| style="text-align: center;" | 8.0 MHz
| 8051
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
| style="text-align: center;" | 20 MHz
|-
|-
| [[Intel 8086|80186]]
| 8080
| LCC/PGA
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM05]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM202]]
| style="text-align: center;" | PM101 Opt 01
| style="text-align: center;" | 3
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | X
| style="text-align: center;" | 8.0 MHz
|-
|-
| [[Intel 8086|80188]]
| 8085
| LCC/PGA
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM06]]
| style="text-align: center;" | [[PM104]]
| style="text-align: center;" | [[PM202]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 8.0 MHz
| style="text-align: center;" | 10 MHz
|-
|-
| [[Intel 80286|80286]]
| 8086
| LCC/PGA
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM08]]
| style="text-align: center;" | [[PM106]]
| style="text-align: center;" | [[PM204]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 10.0 MHz
| style="text-align: center;" | 8 MHz
|-
|-
| 8096/7
| 8088
|  
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM99]] Opt 16
| style="text-align: center;" | [[PM107]]
| style="text-align: center;" | N/A
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | 5 MHz
| style="text-align: center;" | 6*1
|-
| style="text-align: center;" | 12 MHz
| 8748
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | 20 MHz
|-
| 8751
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
| style="text-align: center;" | 20 MHz
|-
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Motorola
| colspan="5" style="font-style:italic; background-color:#efefef;" | Motorola
|-
|-
| [[Motorola 6800|6800]]
| 6800
|  
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM21]]
| style="text-align: center;" | [[PM102]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 2 MHz
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
|-
| [[Motorola 6800|6801]]
| 6801
|
| style="text-align: center;" | STD
| style="text-align: center;" | [[12RM99]] Opt 05
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | [[Media:061-6000-00.pdf|061-6000-00]] Application manual
| style="text-align: center;" | 2
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
|-
| [[Motorola 6802|6802]]
| 6802
|  
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM22]]
| style="text-align: center;" | [[PM103]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
|-
| [[Motorola 6800|6805(E2)]]
| 6803
|
| style="text-align: center;" | STD
| style="text-align: center;" | [[12RM99]] Opt 06
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | [[Media:061-6000-00.pdf|061-6000-00]] Application manual
| style="text-align: center;" | 2
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 2*1
| style="text-align: center;" | Max
|-
|-
| [[Motorola 6800|6805(E3)]]
| 6808
|
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM99]] Opt 07
| style="text-align: center;" | [[PM103]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | 3*1
| style="text-align: center;" | Max
|-
|-
| [[Motorola 6800|6808]]
| 6809
|  
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM23]]
| style="text-align: center;" | [[PM111]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 8 MHz
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
|-
| [[Motorola 6809|6809]]
| 6809E
|  
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM24]]
| style="text-align: center;" | [[PM111]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 8 MHz
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
|-
| [[Motorola 6809|6809E]]
| 68000
|  
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM24]]
| style="text-align: center;" | [[PM109]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 10 MHz
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
|-
| 68HC11
| colspan="5" style="font-style:italic; background-color:#efefef;" | Zilog
|
| style="text-align: center;" | [[12RM99]] Opt 08
| style="text-align: center;" | N/A
| style="text-align: center;" | 2
| style="text-align: center;" | 3*1
| style="text-align: center;" | Max
|-
|-
| [[Motorola 68000|68000]]
| Z-80
| DIP
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM25]]
| style="text-align: center;" | [[PM105]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | None
| style="text-align: center;" | 16 MHz
|-
|-
| [[Motorola 68000|68000]]
| Z8001
| PGA
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM25]]
| style="text-align: center;" | [[PM110]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | None
| style="text-align: center;" | 16 MHz
|-
|-
| [[Motorola 68000|68008]]
| Z8002
| DIP
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM26]]
| style="text-align: center;" | [[PM108]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | 4 MHz
| style="text-align: center;" | None
| style="text-align: center;" | 16 MHz
|-
|-
| [[Motorola 68000|68010]]
| colspan="5" style="font-style:italic; background-color:#efefef;" | Texas Instruments
| DIP
| style="text-align: center;" | [[12RM27]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | 16 MHz
|-
|-
| [[Motorola 68000|68010]]
| TMS9900
| PGA
| style="text-align: center;" | STD
| style="text-align: center;" | [[12RM27]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | [[Media:061-6002-00.pdf|061-6002-00]] Application manual
| style="text-align: center;" | 3
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | None
| style="text-align: center;" | 16 MHz
|-
|-
| [[Motorola 68020|68020]]
| colspan="5" style="font-style:italic; background-color:#efefef;" | Other microproscessor
|
| style="text-align: center;" | [[12RM31]]
| style="text-align: center;" | [[PM205]]
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | 25.0 MHz
|-
|-
| [[Motorola 68030|68030]]
| 1802
|
| style="text-align: center;" | STD
| style="text-align: center;" | [[12RM33]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | ?
| style="text-align: center;" | [[Media:061-6001-00.pdf|061-6001-00]] Application manual
| style="text-align: center;" | 3
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | None
| style="text-align: center;" | 25.0 MHz
|-
|-
| DSP56000/1
| 6502
|
| style="text-align: center;" | FM
| style="text-align: center;" | [[12RM99]] Opt 17
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | NA
| style="text-align: center;" | PM101 Opt 02
| style="text-align: center;" | 3
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 6*1
| style="text-align: center;" | 50 MHz
|-
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Zilog
| colspan="5" style="font-style:italic; background-color:#efefef;" | Other
|-
|-
| [[Zilog Z-80|Z-80]]
| MULTIBUS
|  
| style="text-align: center;" | STD
| style="text-align: center;" | [[12RM41]]
| style="text-align: center;" | [[PM112]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 5 MHz
| style="text-align: center;" | 4*1
|}
| style="text-align: center;" | 8 MHz
 
|-
==Tektronix [[DAS9100]]==
| [[Zilog Z-8000|Z8001/3]]
See [[91TMXX tapes]] for information on tapes.
|
Note:
| style="text-align: center;" | [[12RM42]]
*In catalog 1982-1989
| style="text-align: center;" | NA
*All acquisition boards are either [[91A24]] or [[91AE24]].
| style="text-align: center;" | 3
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
| style="text-align: center;" | 4*3
*(*1) means that [[P6460]] probes are always required.
| style="text-align: center;" | 10 MHz
*(*2) means that [[P6460]] probes are required for CMOS version.
*(*3) means that [[P6460]] or [[P6462]] probes can be used.
*PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.
 
It is also possible for the user to create mnemonics tables, using the Mnemonics menu.
* [[Media:DAS_9100_Series_Operators_Section_7_update.pdf|DAS 9100 Operator's Manual Section 7 update (PDF, OCR)]]
<!--Page 52 of 1982 catalogue-->
<!--Page 63 of 1983 catalogue-->
<!--Page 83 of 1984 catalogue-->
<!--Page 126 of 1987 catalogue-->
{| class="wikitable"
{| class="wikitable"
|[[File:DAS9100.jpg|140px|]]
! colspan="7" style="text-align: center; background-color:#efefef;" | Tektronix [[DAS9100]]
|-
|-
| [[Zilog Z-8000|Z8002/4]]
! Microprocessor
|
! IC package
| style="text-align: center;" | [[12RM43]]
! Mnemonic tape
| style="text-align: center;" | X
! Probe adapter
| style="text-align: center;" | 3
! Acq.Boards required
| style="text-align: center;" | 3*3
! Acq.Probes required
| style="text-align: center;" | 10 MHz
! Fastest clock supported
|-
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Texas Instruments
| colspan="7" style="font-style:italic; background-color:#efefef;" | Intel
|-
|-
| [[Texas Instruments TMS320|TMS320320/320C25]]
| 8080
|  
|  
| style="text-align: center;" | [[12RM99]] Opt 11
| style="text-align: center;" | [[91TM01]]
| style="text-align: center;" | NA
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | 2
| style="text-align: center;" | 5*1
| style="text-align: center;" | 4*3
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | Max
|-
|-
| [[Texas Instruments TMS320|TMS32010]]
| 8031
|  
|  
| style="text-align: center;" | [[12RM99]] Opt 14
| style="text-align: center;" | [[91TM07]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 4*1
| style="text-align: center;" | 4*1
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| colspan="7" style="font-style:italic;" | Hitachi
| 8039
|-
| 6301/3
|  
|  
| style="text-align: center;" | [[12RM99]] Opt 09
| style="text-align: center;" | [[91TM10]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 1
| style="text-align: center;" | 4*3
| style="text-align: center;" | 3*1
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 64180R0/R1
| 8085
|  
|  
| style="text-align: center;" | [[12RM99]] Opt 12
| style="text-align: center;" | [[91TM02]]
| style="text-align: center;" | NA
| style="text-align: center;" | 3
| style="text-align: center;" | 5*1
| style="text-align: center;" | Max
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Other microprocessors
|-
| [[MOS Technology 6502|6502/C02]]
|
| style="text-align: center;" | [[12RM63]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 4*2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| [[RCA 1802]]/4/5/6/(A/C/AC/BC)
| 8086
|  
| DIP
| style="text-align: center;" | [[12RM99]] Opt 22
| style="text-align: center;" | [[91TM03]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | [[PM201]]
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 3*1
| style="text-align: center;" | X
| style="text-align: center;" | Max
| style="text-align: center;" | 10 MHz
|-
|-
| [[Analog Devices ADSP2100]]
| 8088
|  
| DIP
| style="text-align: center;" | [[12RM99]] Opt 17
| style="text-align: center;" | [[91TM04]]
| style="text-align: center;" | NA
| style="text-align: center;" | [[PM201]]
| style="text-align: center;" | 3
| style="text-align: center;" | 2
| style="text-align: center;" | 6*1
| style="text-align: center;" | X
| style="text-align: center;" | Max
| style="text-align: center;" | 10 MHz
|-
|-
| [[Fairchild F9450]]
| 80186
|  
| LCC
| style="text-align: center;" | [[12RM62A]]
| style="text-align: center;" | [[91TM05]]
| style="text-align: center;" | NA
| style="text-align: center;" | [[PM202]]
| style="text-align: center;" | 3
| style="text-align: center;" | 2
| style="text-align: center;" | 3*3
| style="text-align: center;" | X
| style="text-align: center;" | 40 MHz
| style="text-align: center;" | 10 MHz
|-
|-
| MIL-Std 1705A
| 80188
|  
| LCC
| style="text-align: center;" | ?
| style="text-align: center;" | [[91TM06]]
| style="text-align: center;" | ?
| style="text-align: center;" | [[PM202]]
| style="text-align: center;" | ?
| style="text-align: center;" | 2
| style="text-align: center;" | ?
| style="text-align: center;" | X
| style="text-align: center;" | 40 MHz
| style="text-align: center;" | 10 MHz
|-
|-
| [[National Semiconductor NSC800]]
| colspan="7" style="font-style:italic; background-color:#efefef;" | Motorola
|  
|-
| style="text-align: center;" | [[12RM71]]
| 6800
|  
| style="text-align: center;" | [[91TM21]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 4*1
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| GM EMC
| 6801
|  
|  
| style="text-align: center;" | [[12RM99]] Opt 01
| style="text-align: center;" | [[91TM28]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Other
| 6802
|-
| VAXBI
|  
|  
| style="text-align: center;" | [[12RM99]] Opt 13
| style="text-align: center;" | [[91TM22]]
| style="text-align: center;" | [[012-1164-00]]
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | 2
| style="text-align: center;" | 6*3
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| [[GPIB]]
| 6803
|  
|  
| style="text-align: center;" | [[12RM99]] Opt 04
| style="text-align: center;" | [[91TM29]]
| style="text-align: center;" | [[103-0209-00]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 2*3
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|}
==Tektronix [[1230]]==
* The [[1230DPA]] is required for all DPXXXX probes.
* All acquisition boards are [[1230E1]].
* All of the needed software is included with the personality module.
{| class="wikitable"
|[[File:Tek 1230.jpg|140px|]]
! colspan="6" style="text-align: center; font-weight:bold;" | Tektronix [[1230]]
|-
|-
! Microprocessor
| 6805
! IC package
|
! Probe adapter
| style="text-align: center;" | [[91TM30]]
! Acq. boards required
| style="text-align: center;" | [[UPIK 40]]
! Acq. probes required
| style="text-align: center;" | 2
! Fastest clock supported
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
|-
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Intel
| 6808
|-
|  
| 8031/8051
| style="text-align: center;" | [[91TM23]]
| style="text-align: center;" | DIP
| style="text-align: center;" | X
| style="text-align: center;" | [[DP8031D]]
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 4*3
| style="text-align: center;" | 12 MHz
| style="text-align: center;" | Max
|-
|-
| 8085
| 6809
| style="text-align: center;" | DIP
|
| style="text-align: center;" | [[PM404]]
| style="text-align: center;" | [[91TM24]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 4*3
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | Max
|-
|-
| 8086
| 68121
| style="text-align: center;" | DIP
|
| style="text-align: center;" | [[DP8086D]]
| style="text-align: center;" | [[91TM32]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| 68000
| DIP
| style="text-align: center;" | [[91TM25]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | None
| style="text-align: center;" | 10 MHz
| style="text-align: center;" | 12.5 MHz
|-
|-
| 8087
| 68000
| style="text-align: center;" | DIP
| PGA
| style="text-align: center;" | [[DP8031D]] [[DP8086D]]
| style="text-align: center;" | [[91TM25]]
| style="text-align: center;" | ?
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | None
| style="text-align: center;" | ?
| style="text-align: center;" | 12.5 MHz
|-
|-
| 8088
| 68008
| style="text-align: center;" | DIP
| DIP
| style="text-align: center;" | [[DP8086D]]
| style="text-align: center;" | [[91TM26]]
| style="text-align: center;" | 3
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | None
| style="text-align: center;" | 10 MHz
| style="text-align: center;" | 8 MHz
|-
|-
| 80186
| 68010
| style="text-align: center;" | PGA
| DIP
| style="text-align: center;" | [[DP186P]]
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | 3
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | None
| style="text-align: center;" | 10 MHz
| style="text-align: center;" | 12.5 MHz
|-
|-
| 80188
| 68010
| style="text-align: center;" | PGA
| PGA
| style="text-align: center;" | [[DP186P]]
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | 3
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | None
| style="text-align: center;" | 10 MHz
| style="text-align: center;" | 12.5 MHz
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Zilog
|-
|-
| 8096/7
| Z-80
| style="text-align: center;" | PLCC
|
| style="text-align: center;" | [[DP96PL]]
| style="text-align: center;" | [[91TM41]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | None
| style="text-align: center;" | 2
| style="text-align: center;" | 12 MHz
| style="text-align: center;" | 4*1
| style="text-align: center;" | Max
|-
|-
| 80C196
| Z8001/3
| style="text-align: center;" | PLCC
|
| style="text-align: center;" | [[DP96PL]]
| style="text-align: center;" | [[91TM42]]
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | 4*3
| style="text-align: center;" | 12 MHz
| style="text-align: center;" | Max
|-
|-
| 80286
| Z8002/4
| style="text-align: center;" | PGA
|
| style="text-align: center;" | [[DP286PL]]
| style="text-align: center;" | [[91TM43]]
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | 3*3
| style="text-align: center;" | 12.5 MHz
| style="text-align: center;" | Max
|-
|-
| 80287
| colspan="7" style="font-style:italic; background-color:#efefef;" | Other microprocessors
| style="text-align: center;" | PGA
| style="text-align: center;" | [[DP286PL]]
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | 12.5 MHz
|-
|-
| 80286
| 6502/C02
| style="text-align: center;" | PLCC
|
| style="text-align: center;" | [[DP286P]]
| style="text-align: center;" | [[91TM63]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | None
| style="text-align: center;" | 2
| style="text-align: center;" | 12.5 MHz
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
|-
|-
| 80287
| 1802
| style="text-align: center;" | PLCC
|
| style="text-align: center;" | [[DP286P]]
| style="text-align: center;" | [[91TM61]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | None
| style="text-align: center;" | 2
| style="text-align: center;" | 12.5 MHz
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
|-
|-
| 80386SX
| 1803
| style="text-align: center;" | PQFP
|
| style="text-align: center;" | [[DP386SX]]
| style="text-align: center;" | [[91TM65]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | None
| style="text-align: center;" | 2
| style="text-align: center;" | 16 MHz
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
|-
|-
| 80387SX
| F9450
| style="text-align: center;" | PQFP
|  
| style="text-align: center;" | [[DP386SX]]
| style="text-align: center;" | [[91TM62]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | None
| style="text-align: center;" | 16 MHz
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Motorola
|-
| 6800
| style="text-align: center;" | DIP
| style="text-align: center;" | [[PM407]]
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 6802
| MIL-Std 1705A
| style="text-align: center;" | DIP
|
| style="text-align: center;" | [[PM407]]
| style="text-align: center;" | [[91TM64]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | N/A
| style="text-align: center;" | Max
| style="text-align: center;" | N/A
|-
|-
| 6809
| NSC800
| style="text-align: center;" | DIP
|
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | [[91TM71]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 4*1
| style="text-align: center;" | 2 MHz
| style="text-align: center;" | Max
|-
|-
| 6809E
| colspan="7" style="font-style:italic; background-color:#efefef;" | BUS
| style="text-align: center;" | DIP
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 2 MHz
|-
|-
| 68HC11
| UNIBUS
| style="text-align: center;" | All
|
| style="text-align: center;" | [[DPHC11Q]]
| style="text-align: center;" | [[91TM51]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 4*3
| style="text-align: center;" | 12 MHz
| style="text-align: center;" | Max
|-
|-
| 68000
| Q-BUS
| style="text-align: center;" | DIP
|
| style="text-align: center;" | [[DP68KD]]
| style="text-align: center;" | [[91TM52]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | None
| style="text-align: center;" | 2
| style="text-align: center;" | 16 MHz
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
|-
| 68000
| QPIB
| style="text-align: center;" | PGA
|
| style="text-align: center;" | [[DP68KP]]
| style="text-align: center;" | [[91TM53]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | None
| style="text-align: center;" | 1
| style="text-align: center;" | 16 MHz
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
|-
|-
| 68010
| ASCII
| style="text-align: center;" | DIP
|
| style="text-align: center;" | [[DP68KD]]
| style="text-align: center;" | [[91TM53]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | None
| style="text-align: center;" | 1
| style="text-align: center;" | 16 MHz
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
|-
|-
| 68010
| EBCDIC
| style="text-align: center;" | PGA
|
| style="text-align: center;" | [[DP68KP]]
| style="text-align: center;" | [[91TM53]]
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | None
| style="text-align: center;" | 1
| style="text-align: center;" | 16 MHz
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
|}
The following table gives the configuration for the [[PMA 100]] Personality Module Adapter, which is an interface that connects PM1XX personality modules to the [[DAS9100]].
* FM stands for full mnemonic disassembly.
* CM stands for control mnemonics.
* STD stands for standard radices (hex, binary, octal).
* DM means that the mnemonics may be developed using DAS mnemonics.
 
{| class="wikitable"
|[[File:DAS9100.jpg|140px|]]
! colspan="5" style="text-align: center; font-weight:bold; background-color:#efefef;" | [[DAS9100]] with [[PMA 100]]
|-
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
! Microprocessor
! Support Feature
! Probe adapter
! Requires
! Fastest clock supported
|-
|-
| Z-80
| colspan="5" style="font-style:italic; background-color:#efefef;" | Intel
| style="text-align: center;" | DIP
| style="text-align: center;" | [[PM402]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | Max
|-
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other Microprocessors
| 8031
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 6502/C02
| 8035
| style="text-align: center;" | DIP
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM403]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | 2
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | None
| style="text-align: center;" | ?
| style="text-align: center;" | Max
|-
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other
| 8039
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| STD
| 8048
| style="text-align: center;" |  
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM405]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | 2
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | None
| style="text-align: center;" | ?
| style="text-align: center;" | 12.5 MHz
|-
|-
| GPIB
| 8049
| style="text-align: center;" |  
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[DPGPIB]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | Any
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | None
| style="text-align: center;" | ?
| style="text-align: center;" | 10 MHz
|-
|-
| RS-232
| 8051
| style="text-align: center;" |  
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[A6740G]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | Any
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | None
| style="text-align: center;" | ?
| style="text-align: center;" | 19.2 K baud
|}
 
==Tektronix [[1225]]/[[1220]]==
Note that the configuration table for the [[1230]] is not the same as the one for its two predecessors.
The internal hardware is different enough that the [[1225]]/[[1220]] can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.
{| class="wikitable"
|[[File:Tek 1225 front.JPG|140px|]]
! colspan="3" style="text-align: center; font-weight:bold;" | Tektronix [[1225]]/[[1220]]
|-
|-
! Microprocessor
| 8080
! Probe adapter
| style="text-align: center;" | FM, DM
! Fastest clock supported
| style="text-align: center;" | [[PM101]]
|-
| style="text-align: center;" | PM101 Opt 01
| colspan="4" style="font-style:italic; background-color:#efefef;" | Intel
| style="text-align: center;" | ?
|-
|-
| 8085
| 8085
| style="text-align: center;" | [[PM404]]
| style="text-align: center;" | FM, DM
| style="text-align: center;" | Max
| style="text-align: center;" | [[PM104]]
| style="text-align: center;" | X
| style="text-align: center;" | 10 MHz
|-
|-
| 8086  
| 8086
| style="text-align: center;" | [[PM411]]
| style="text-align: center;" | FM, DM
| style="text-align: center;" |  
| style="text-align: center;" | [[PM106]]
| style="text-align: center;" | X
| style="text-align: center;" | 8 MHz
|-
|-
| 8088  
| 8088
| style="text-align: center;" | [[PM411]]
| style="text-align: center;" | FM, DM
| style="text-align: center;" |  
| style="text-align: center;" | [[PM107]]
| style="text-align: center;" | X
| style="text-align: center;" | 5 MHz
|-
|-
| colspan="4" style="font-style:italic; background-color:#efefef;" | Motorola
| 8748
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 6800
| 8751
| style="text-align: center;" | [[PM407]]
| style="text-align: center;" | STD, DM
| style="text-align: center;" |  
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 6802
| colspan="5" style="font-style:italic; background-color:#efefef;" | Motorola
| style="text-align: center;" | [[PM407]]
| style="text-align: center;" |  
|-
|-
| 6809
| 6800
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | FM, DM
| style="text-align: center;" | Max
| style="text-align: center;" | [[PM102]]
| style="text-align: center;" | X
| style="text-align: center;" | 2 MHz
|-
|-
| 6809E
| 6801
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | STD, DM
| style="text-align: center;" | Max
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6000-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 68000
| 6802
| style="text-align: center;" | [[PM412]]
| style="text-align: center;" | FM, DM
| style="text-align: center;" |  
| style="text-align: center;" | [[PM103]]
| style="text-align: center;" | X
| style="text-align: center;" | 6 MHz
|-
|-
| colspan="4" style="font-style:italic; background-color:#efefef;" | Zilog
| 6803
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6000-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| Z80
| 6808
| style="text-align: center;" | [[PM402]]
| style="text-align: center;" | FM, DM
| style="text-align: center;" | Max
| style="text-align: center;" | [[PM103]]
| style="text-align: center;" | X
| style="text-align: center;" | 6 MHz
|-
|-
| colspan="4" style="font-style:italic; background-color:#efefef;" | Other Microprocessor
| 6809
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM111]]
| style="text-align: center;" | X
| style="text-align: center;" | 8 MHz
|-
|-
| 6502/C02
| 6809E
| style="text-align: center;" | [[PM403]]
| style="text-align: center;" | FM, DM
| style="text-align: center;" | Max
| style="text-align: center;" | [[PM111]]
| style="text-align: center;" | X
| style="text-align: center;" | 8 MHz
|-
|-
| colspan="4" style="font-style:italic; background-color:#efefef;" | Other
| 68000
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM109]]
| style="text-align: center;" | X
| style="text-align: center;" | 10 MHz
|-
|-
| STD
| colspan="5" style="font-style:italic; background-color:#efefef;" | Zilog
| style="text-align: center;" | [[PM405]]
| style="text-align: center;" | Max
|}
 
==Tektronix [[1205]]==
{| class="wikitable"
|[[File:Tek 1205 2.jpg|140px|]]
! colspan="6" style="text-align: center; font-weight:bold;" | Tektronix [[1205]]
|-
|-
! Microprocessor
| Z80
! Probe adapter
| style="text-align: center;" | FM, DM
! Acq. boards required
| style="text-align: center;" | [[PM105]]
! Acq. probes required
| style="text-align: center;" | X
! Fastest clock supported
| style="text-align: center;" | 6 MHz
|-
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
| Z8001
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM110]]
| style="text-align: center;" | X
| style="text-align: center;" | 6 MHz
|-
|-
| Z80
| Z8002
| style="text-align: center;" | [[PM302]]
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM108]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | None
| style="text-align: center;" | 4 MHz
| style="text-align: center;" | 4 MHz
|-
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other
| colspan="5" style="font-style:italic; background-color:#efefef;" | Texas Instruments
|-
|-
| 6502/C02
| TMS9900
| style="text-align: center;" | [[PM303]]
| style="text-align: center;" | STD, DM
| style="text-align: center;" | X
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | None
| style="text-align: center;" | [[061-6002-00]] Application manual
| style="text-align: center;" | 4 MHz
| style="text-align: center;" | ?
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Other microproscessor
|-
| 1802
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6001-00]] Application manual
| style="text-align: center;" | ?
|-
| 6502
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | PM101 Opt 02
| style="text-align: center;" | ?
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | BUS
|-
|-
| General
| MULTIBUS
| style="text-align: center;" | [[PM301]]
| style="text-align: center;" | CM, STD, DM
| style="text-align: center;" | [[PM112]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | None
| style="text-align: center;" | ?
| style="text-align: center;" | 4 MHz
|}
|}


==Tektronix [[7D02]]==
==Tektronix [[1240]]/[[1241]]==
Note:
 
* The [[PM101]] is a general purpose probe, it can be defined to work with processors not listed here.
*In catalog 1984-1990
* "FM" stands for Full mnemonic disassembly.
*All acquisition boards are the 18-channel [[1240D2]]. The 9-channel [[1240D1]] cannot be used.
* "STD" stands for Standard radices (Hex, Bin, Octal).
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
*(*1) means that [[P6460]] probes are always required.
*(*2) means that [[P6460]] probes are required for CMOS version.
*(*3) means that [[P6460]] or [[P6462]] probes can be used.
*PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.
*There is a design for a multipurpose RAM/ROM pack, called [[Making_1200_series_cartridges|SuperPack]] by Pavel Korensky.  Note the errata in the [[Media:Tek1240-SPDesign10.ZIP|README file]].
*ROM Pack designations remain confusing.  Not only do they use two conventions - "12RMXX" and "12RM99 Option XX" - but there is overlap and conflict between those for 8-bit CPUs and those for 16-bit CPUs e.g. 12RM01 appears to refer to both 8080 and 8086 support (see: Tektronix 1987 catalog p.121).
{| class="wikitable"
{| class="wikitable"
|[[File:Tektronix_7D02.jpg|140px|]]
|[[File:Tektronix 1240 front panel.jpeg|140px|]]
! colspan="5" style="text-align: center; font-weight:bold; background-color:#efefef;" | Tektronix [[7D02]]
| colspan="7" style="text-align: center; font-weight:bold;" | Tektronix [[1240]]/[[1241]] ROM pack and configuration table
|-
|-
! Microprocessor
! Microprocessor
! Support Feature
! IC package
! ROM pack
! Probe adapter
! Probe adapter
! Requires
! Acq. boards required
! Acq. probes required
! Fastest clock supported
! Fastest clock supported
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Intel
| colspan="7" style="font-style:italic; background-color:#efefef;" | Intel
|-
|-
| 8031
| [[Intel 8080|8080]]
| style="text-align: center;" | STD
|
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM01]]
| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
| style="text-align: center;" | N/A
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 4X [[P6460]]
| style="text-align: center;" | Max
|-
|-
| 8035
| [[Intel 8051|8031/8051]]
| style="text-align: center;" | STD
|
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM99]] Opt 03
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 4X [[P6460]]
| style="text-align: center;" | 12 MHz
|-
|-
| 8039
| [[Intel 8085|8085]]
| style="text-align: center;" | STD
|
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM02]]
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | N/A
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
| style="text-align: center;" | Max
|-
|-
| 8048
| [[Intel 8086|8086]]
| style="text-align: center;" | STD
| DIP
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM03]]
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | [[PM201]]
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 8.0 MHz
|-
|-
| 8049
| [[Intel 8086|8088]]
| style="text-align: center;" | STD
| DIP
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM04]]
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | [[PM201]]
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 8.0 MHz
|-
|-
| 8051
| [[Intel 8086|80186]]
| style="text-align: center;" | STD
| LCC/PGA
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM05]]
| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
| style="text-align: center;" | [[PM202]]
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 8.0 MHz
|-
|-
| 8080
| [[Intel 8086|80188]]
| style="text-align: center;" | FM
| LCC/PGA
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM06]]
| style="text-align: center;" | PM101 Opt 01
| style="text-align: center;" | [[PM202]]
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 8.0 MHz
|-
|-
| 8085
| [[Intel 80286|80286]]
| style="text-align: center;" | FM
| LCC/PGA
| style="text-align: center;" | [[PM104]]
| style="text-align: center;" | [[12RM08]]
| style="text-align: center;" | X
| style="text-align: center;" | [[PM204]]
| style="text-align: center;" | 10 MHz
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 10.0 MHz
|-
|-
| 8086
| 8096/7
| style="text-align: center;" | FM
|
| style="text-align: center;" | [[PM106]]
| style="text-align: center;" | [[12RM99]] Opt 16
| style="text-align: center;" | X
| style="text-align: center;" | N/A
| style="text-align: center;" | 8 MHz
| style="text-align: center;" | 3
| style="text-align: center;" | 6X [[P6460]]
| style="text-align: center;" | 12 MHz
|-
|-
| 8088
| colspan="7" style="font-style:italic; background-color:#efefef;" | Motorola
| style="text-align: center;" | FM
| style="text-align: center;" | [[PM107]]
| style="text-align: center;" | X
| style="text-align: center;" | 5 MHz
|-
|-
| 8748
| [[Motorola 6800|6800]]
| style="text-align: center;" | STD
|
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM21]]
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | N/A
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
| style="text-align: center;" | Max
|-
|-
| 8751
| [[Motorola 6800|6801]]
| style="text-align: center;" | STD
|
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM99]] Opt 05
| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
| style="text-align: center;" | Max
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Motorola
| [[Motorola 6802|6802]]
|-
|
| 6800
| style="text-align: center;" | [[12RM22]]
| style="text-align: center;" | FM
| style="text-align: center;" | N/A
| style="text-align: center;" | [[PM102]]
| style="text-align: center;" | 2
| style="text-align: center;" | X
| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
| style="text-align: center;" | 2 MHz
| style="text-align: center;" | Max
|-
|-
| 6801
| [[Motorola 6800|6805(E2)]]
| style="text-align: center;" | STD
|
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM99]] Opt 06
| style="text-align: center;" | [[Media:061-6000-00.pdf|061-6000-00]] Application manual
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 2X [[P6460]]
| style="text-align: center;" | Max
|-
|-
| 6802
| [[Motorola 6800|6805(E3)]]
| style="text-align: center;" | FM
|
| style="text-align: center;" | [[PM103]]
| style="text-align: center;" | [[12RM99]] Opt 07
| style="text-align: center;" | X
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 3X [[P6460]]
| style="text-align: center;" | Max
|-
|-
| 6803
| [[Motorola 6800|6808]]
| style="text-align: center;" | STD
|
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM23]]
| style="text-align: center;" | [[Media:061-6000-00.pdf|061-6000-00]] Application manual
| style="text-align: center;" | N/A
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
| style="text-align: center;" | Max
|-
|-
| 6808
| [[Motorola 6809|6809]]
| style="text-align: center;" | FM
|  
| style="text-align: center;" | [[PM103]]
| style="text-align: center;" | [[12RM24]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
| style="text-align: center;" | Max
|-
|-
| 6809
| [[Motorola 6809|6809E]]
| style="text-align: center;" | FM
|
| style="text-align: center;" | [[PM111]]
| style="text-align: center;" | [[12RM24]]
| style="text-align: center;" | X
| style="text-align: center;" | N/A
| style="text-align: center;" | 8 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
| style="text-align: center;" | Max
|-
|-
| 6809E
| [[Motorola 6800|68HC11]]
| style="text-align: center;" | FM
|
| style="text-align: center;" | [[PM111]]
| style="text-align: center;" | [[12RM99]] Opt 08
| style="text-align: center;" | X
| style="text-align: center;" | N/A
| style="text-align: center;" | 8 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 3X [[P6460]]
| style="text-align: center;" | Max
|-
|-
| 68000
| [[Motorola 68000|68000]]
| style="text-align: center;" | FM
| DIP
| style="text-align: center;" | [[PM109]]
| style="text-align: center;" | [[12RM25]]
| style="text-align: center;" | X
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 10 MHz
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 16 MHz
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Zilog
| [[Motorola 68000|68000]]
| PGA
| style="text-align: center;" | [[12RM25]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 16 MHz
|-
|-
| Z-80
| [[Motorola 68000|68008]]
| style="text-align: center;" | FM
| DIP
| style="text-align: center;" | [[PM105]]
| style="text-align: center;" | [[12RM26]]
| style="text-align: center;" | X
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 16 MHz
|-
|-
| Z8001
| [[Motorola 68000|68010]]
| style="text-align: center;" | FM
| DIP
| style="text-align: center;" | [[PM110]]
| style="text-align: center;" | [[12RM27]]
| style="text-align: center;" | X
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 16 MHz
|-
|-
| Z8002
| [[Motorola 68000|68010]]
| style="text-align: center;" | FM
| PGA
| style="text-align: center;" | [[PM108]]
| style="text-align: center;" | [[12RM27]]
| style="text-align: center;" | X
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 4 MHz
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 16 MHz
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Texas Instruments
| [[Motorola 68020|68020]]
|
| style="text-align: center;" | [[12RM31]]
| style="text-align: center;" | [[PM205]]
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 25.0 MHz
|-
|-
| TMS9900
| [[Motorola 68030|68030]]
| style="text-align: center;" | STD
|
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM33]]
| style="text-align: center;" | [[Media:061-6002-00.pdf|061-6002-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 3
| style="text-align: center;" | N/A
| style="text-align: center;" | 25.0 MHz
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Other microproscessor
| DSP56000/1
|
| style="text-align: center;" | [[12RM99]] Opt 17
| style="text-align: center;" | N/A
| style="text-align: center;" | 3
| style="text-align: center;" | 6X [[P6460]]
| style="text-align: center;" | 50 MHz
|-
|-
| 1802
| colspan="7" style="font-style:italic; background-color:#efefef;" | Zilog
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[Media:061-6001-00.pdf|061-6001-00]] Application manual
| style="text-align: center;" | 20 MHz
|-
|-
| 6502
| [[Zilog Z-80|Z-80]]
| style="text-align: center;" | FM
|
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[12RM41]]
| style="text-align: center;" | PM101 Opt 02
| style="text-align: center;" | N/A
| style="text-align: center;" | 20 MHz
| style="text-align: center;" | 2
| style="text-align: center;" | 4X [[P6460]]
| style="text-align: center;" | 8 MHz
|-
| [[Zilog Z-80|Z-80]]
|
| style="text-align: center;" | [[12RM07]]
| style="text-align: center;" | N/A
| style="text-align: center;" | 2
| style="text-align: center;" | 4X [[P6460]]
| style="text-align: center;" | 8 MHz
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Other
| [[Zilog Z-8000|Z8001/3]]
|
| style="text-align: center;" | [[12RM42]]
| style="text-align: center;" | N/A
| style="text-align: center;" | 3
| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
| style="text-align: center;" | 10 MHz
|-
|-
| MULTIBUS
| [[Zilog Z-8000|Z8002/4]]
| style="text-align: center;" | STD
|
| style="text-align: center;" | [[PM112]]
| style="text-align: center;" | [[12RM43]]
| style="text-align: center;" | X
| style="text-align: center;" | N/A
| style="text-align: center;" | 5 MHz
| style="text-align: center;" | 3
|}
| style="text-align: center;" | 3*3
 
| style="text-align: center;" | 10 MHz
==Tektronix [[DAS9100]]==
See [[91TMXX tapes]] for information on tapes.
Note:
*All acquisition boards are either [[91A24]] or [[91AE24]].
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
*(*1) means that [[P6460]] probes are always required.
*(*2) means that [[P6460]] probes are required for CMOS version.
*(*3) means that [[P6460]] or [[P6462]] probes can be used.
*PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and its package.
 
It is also possible for the user to create mnemonics tables, using the Mnemonics menu.
* [[Media:DAS_9100_Series_Operators_Section_7_update.pdf|DAS 9100 Operator's Manual Section 7 update (PDF, OCR)]]
<!--Page 52 of 1982 catalogue-->
<!--Page 63 of 1983 catalogue-->
<!--Page 83 of 1984 catalogue-->
<!--Page 126 of 1987 catalogue-->
{| class="wikitable"
{| class="wikitable"
|[[File:DAS9100.jpg|140px|]]
! colspan="7" style="text-align: center; background-color:#efefef;" | Tektronix [[DAS9100]]
|-
|-
! Microprocessor
| colspan="7" style="font-style:italic; background-color:#efefef;" | Texas Instruments
! IC package
! ROM tape
! Probe adapter
! Acq.Boards required
! Acq.Probes required
! Fastest clock supported
|-
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Intel
| [[Texas Instruments TMS320|TMS320320/320C25]]
|
| style="text-align: center;" | [[12RM99]] Opt 11
| style="text-align: center;" | N/A
| style="text-align: center;" | 3
| style="text-align: center;" | 5X [[P6460]]
| style="text-align: center;" | 20 MHz
|-
|-
| 8080
| [[Texas Instruments TMS320|TMS32010]]
|  
|  
| style="text-align: center;" | [[91TM01]]
| style="text-align: center;" | [[12RM99]] Opt 14
| style="text-align: center;" | X
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | 4X [[P6460]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 8031
| colspan="7" style="font-style:italic;" | Hitachi
|-
| 6301/3
|  
|  
| style="text-align: center;" | [[91TM07]]
| style="text-align: center;" | [[12RM99]] Opt 09
| style="text-align: center;" | X
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 4*1
| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 8039
| 64180R0/R1
|  
|  
| style="text-align: center;" | [[91TM10]]
| style="text-align: center;" | [[12RM99]] Opt 12
| style="text-align: center;" | X
| style="text-align: center;" | N/A
| style="text-align: center;" | 1
| style="text-align: center;" | 3
| style="text-align: center;" | 3*1
| style="text-align: center;" | 5X [[P6460]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 8085
| colspan="7" style="font-style:italic; background-color:#efefef;" | Other microprocessors
|-
| [[MOS Technology 6502|6502]]
|  
|  
| style="text-align: center;" | [[91TM02]]
| style="text-align: center;" | [[12RM63]]
| style="text-align: center;" | X
| style="text-align: center;" | N/A
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 8086
| [[MOS Technology 6502|65C02]]
| DIP
|  
| style="text-align: center;" | [[91TM03]]
| style="text-align: center;" | [[12RM63]]
| style="text-align: center;" | [[PM201]]
| style="text-align: center;" | N/A
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | X
| style="text-align: center;" | 4*2
| style="text-align: center;" | 10 MHz
| style="text-align: center;" | Max
|-
|-
| 8088
| [[RCA 1802]]/4/5/6/(A/C/AC/BC)
| DIP
|  
| style="text-align: center;" | [[91TM04]]
| style="text-align: center;" | [[12RM99]] Opt 22
| style="text-align: center;" | [[PM201]]
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | X
| style="text-align: center;" | 3X [[P6460]]
| style="text-align: center;" | 10 MHz
| style="text-align: center;" | Max
|-
|-
| 80186
| [[Analog Devices ADSP2100]]
| LCC
|  
| style="text-align: center;" | [[91TM05]]
| style="text-align: center;" | [[12RM99]] Opt 17
| style="text-align: center;" | [[PM202]]
| style="text-align: center;" | N/A
| style="text-align: center;" | 2
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | 6X [[P6460]]
| style="text-align: center;" | 10 MHz
| style="text-align: center;" | Max
|-
|-
| 80188
| [[Fairchild F9450]]
| LCC
|  
| style="text-align: center;" | [[91TM06]]
| style="text-align: center;" | [[12RM62A]]
| style="text-align: center;" | [[PM202]]
| style="text-align: center;" | N/A
| style="text-align: center;" | 2
| style="text-align: center;" | 3
| style="text-align: center;" | X
| style="text-align: center;" | 3*3
| style="text-align: center;" | 10 MHz
| style="text-align: center;" | 40 MHz
|-
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Motorola
| MIL-Std 1705A
|
| style="text-align: center;" | ?
| style="text-align: center;" | ?
| style="text-align: center;" | ?
| style="text-align: center;" | ?
| style="text-align: center;" | 40 MHz
|-
|-
| 6800
| [[National Semiconductor NSC800]]
|  
|  
| style="text-align: center;" | [[91TM21]]
| style="text-align: center;" | [[12RM71]]
| style="text-align: center;" | X
| style="text-align: center;" | N/A
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | 4X [[P6460]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 6801
| [[National Semiconductor NSC800]]
|  
|  
| style="text-align: center;" | [[91TM28]]
| style="text-align: center;" | [[12RM09]]
| style="text-align: center;" | X
| style="text-align: center;" | N/A
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | 4X [[P6460]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 6802
| GM EMC
|  
|  
| style="text-align: center;" | [[91TM22]]
| style="text-align: center;" | [[12RM99]] Opt 01
| style="text-align: center;" | X
| style="text-align: center;" | [[UPIK 40]]
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | 4X [[P6460]] or [[P6462]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 6803
| colspan="7" style="font-style:italic; background-color:#efefef;" | Other
|
| style="text-align: center;" | [[91TM29]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
|-
| 6805
| VAXBI
|  
|  
| style="text-align: center;" | [[91TM30]]
| style="text-align: center;" | [[12RM99]] Opt 13
| style="text-align: center;" | [[UPIK40]]
| style="text-align: center;" | [[012-1164-00]]
| style="text-align: center;" | 2
| style="text-align: center;" | 3
| style="text-align: center;" | 4*2
| style="text-align: center;" | 6*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 6808
| [[GPIB]]
|  
|  
| style="text-align: center;" | [[91TM23]]
| style="text-align: center;" | [[12RM99]] Opt 04
| style="text-align: center;" | X
| style="text-align: center;" | [[103-0209-00]]
| style="text-align: center;" | 2
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | 2*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|}
==Tektronix [[DAS9200]]==
*Introduced 1987
* (*1) [[92A60]] or [[92A90]] pobes can be used.
* (*2) Only [[92A90]] probes can be used.
* See the 1993 Tektronix catalog page 155-157 for the full list
{| class="wikitable"
|[[File:DAS9200(1).jpg|140px|]]
! colspan="6" style="text-align: center; font-weight:bold; background-color:#efefef;" | Tetkronix [[DAS9200]]
|-
|-
| 6809
! Microprocessor
|
! IC package
| style="text-align: center;" | [[91TM24]]
! Software
| style="text-align: center;" | X
! Probe adapter
| style="text-align: center;" | 2
! Probe required
| style="text-align: center;" | 4*3
! Fastest clock supported
| style="text-align: center;" | Max
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Intel
|-
|-
| 68121
| 8085
|  
|  
| style="text-align: center;" | [[91TM32]]
| style="text-align: center;" | [[92DM02]]
| style="text-align: center;" | X
| style="text-align: center;" | [[92DM02]]
| style="text-align: center;" | 2
| style="text-align: center;" | *1
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 68000
| 8086
| DIP
| DIP
| style="text-align: center;" | [[91TM25]]
| style="text-align: center;" | [[92DM03]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | [[92DM03]]
| style="text-align: center;" | 2
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 12.5 MHz
|-
|-
| 68000
| 8088
| PGA
| style="text-align: center;" | [[91TM25]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 12.5 MHz
|-
| 68008
| DIP
| DIP
| style="text-align: center;" | [[91TM26]]
| style="text-align: center;" | [[92DM04]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | [[92DM04]]
| style="text-align: center;" | 2
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 8 MHz
|-
|-
| 68010
| 80186
| DIP
| LCC/PGA
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | [[92DM05]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | [[92DM05]]
| style="text-align: center;" | 2
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 12.5 MHz
|-
|-
| 68010
| 80188
| PGA
| LCC/PGA
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | [[92DM06]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | [[92DM06]]
| style="text-align: center;" | 2
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 12.5 MHz
|-
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Zilog
| 80286
|-
| LCC/PGA
| Z-80
| style="text-align: center;" | [[92DM08]]
| style="text-align: center;" | [[92DM08]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 80386
|  
|  
| style="text-align: center;" | [[91TM41]]
| style="text-align: center;" | [[92DM09]]
| style="text-align: center;" | X
| style="text-align: center;" | [[92DM09]]
| style="text-align: center;" | 2
| style="text-align: center;" | *2
| style="text-align: center;" | 4*1
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| Z8001/3
| colspan="6" style="font-style:italic; background-color:#efefef;" | Motorola
|-
| 6809
|  
|  
| style="text-align: center;" | [[91TM42]]
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | X
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | 3
| style="text-align: center;" | *1
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| Z8002/4
| 6809E
|  
|  
| style="text-align: center;" | [[91TM43]]
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | X
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | 3
| style="text-align: center;" | NA
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Other microprocessors
| 68000
| DIP
| style="text-align: center;" | [[92DM25]], or [[92DM27]]
| style="text-align: center;" | [[92DM25]], or [[92DM27]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
|-
| 6502/C02
| 68000
|  
| PGA
| style="text-align: center;" | [[91TM63]]
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | X
| style="text-align: center;" | ?
| style="text-align: center;" | 2
| style="text-align: center;" | *1
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 1802
| 68010
|  
| DIP
| style="text-align: center;" | [[91TM61]]
| style="text-align: center;" | [[92DM27]]
| style="text-align: center;" | X
| style="text-align: center;" | [[92DM27]]
| style="text-align: center;" | 2
| style="text-align: center;" | *1
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 1803
| 68010
|  
| PGA
| style="text-align: center;" | [[91TM65]]
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | X
| style="text-align: center;" | ?
| style="text-align: center;" | 2
| style="text-align: center;" | *1
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| F9450
| 68020
|  
|  
| style="text-align: center;" | [[91TM62]]
| style="text-align: center;" | [[92DM31]]
| style="text-align: center;" | X
| style="text-align: center;" | [[92DM31]]
| style="text-align: center;" | 2
| style="text-align: center;" | *2
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| MIL-Std 1705A
|
| style="text-align: center;" | [[91TM64]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | N/A
| style="text-align: center;" | N/A
|-
|-
| NSC800
| 68030
|  
|  
| style="text-align: center;" | [[91TM71]]
| style="text-align: center;" | [[92DM33]]
| style="text-align: center;" | X
| style="text-align: center;" | [[92DM33]]
| style="text-align: center;" | 2
| style="text-align: center;" | ?
| style="text-align: center;" | 4*1
| style="text-align: center;" | ?
| style="text-align: center;" | Max
|-
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | BUS
| 68040
|-
| UNIBUS
|  
|  
| style="text-align: center;" | [[91TM51]]
| style="text-align: center;" | ?
| style="text-align: center;" | X
| style="text-align: center;" | ?
| style="text-align: center;" | 2
| style="text-align: center;" | ?
| style="text-align: center;" | 4*3
| style="text-align: center;" | ?
| style="text-align: center;" | Max
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
|-
|-
| Q-BUS
| Z-80
|  
|  
| style="text-align: center;" | [[91TM52]]
| style="text-align: center;" | [[92DM41]]
| style="text-align: center;" | X
| style="text-align: center;" | [[92DM41]]
| style="text-align: center;" | 2
| style="text-align: center;" | *1
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| QPIB
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other microprocessors
|-
| F9450
|  
|  
| style="text-align: center;" | [[91TM53]]
| style="text-align: center;" | [[92DM64]]
| style="text-align: center;" | X
| style="text-align: center;" | Use [[92DM64]] with option 13 for non-MMU, else use without.
| style="text-align: center;" | 1
| style="text-align: center;" | *1
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| ASCII
| 1705A
|  
|  
| style="text-align: center;" | [[91TM53]]
| style="text-align: center;" | [[92DM64]]
| style="text-align: center;" | X
| style="text-align: center;" | Need adapter for emulator PIAs
| style="text-align: center;" | 1
| style="text-align: center;" | *1
| style="text-align: center;" | 3*3
| style="text-align: center;" | 40 MHz
| style="text-align: center;" | Max
|-
| EBCDIC
|
| style="text-align: center;" | [[91TM53]]
| style="text-align: center;" | X
| style="text-align: center;" | 1
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
|}
|}
The following table gives the configuration for the [[PMA 100]] card. It is an interface card for using PM1XX personality modules with the [[DAS9100]].
* FM stands for full mnemonic disassembly.
* CM stands for control mnemonics.
* STD stands for standard radices (hex, binary, octal).
* DM means that the mnemonics may be developed using DAS mnemonics.


[[Category:Logic analyzer personality modules]]
[[Category:ROM packs]]
==Tektronix [[1225]]/[[1220]]==
*In catalog 1988
*Note that the configuration table for the [[1230]] is not the same as the one for the [[1240]]/[[1241]].
The internal hardware is different enough that the [[1225]]/[[1220]] can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.
{| class="wikitable"
{| class="wikitable"
|[[File:DAS9100.jpg|140px|]]
|[[File:Tek 1225 front.JPG|140px|]]
! colspan="5" style="text-align: center; font-weight:bold; background-color:#efefef;" | [[DAS9100]] with [[PMA 100]]
! colspan="3" style="text-align: center; font-weight:bold;" | Tektronix [[1225]]/[[1220]]
|-
|-
! Microprocessor
! Microprocessor
! Support Feature
! Probe adapter
! Probe adapter
! Requires
! Fastest clock supported
! Fastest clock supported
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Intel
| colspan="4" style="font-style:italic; background-color:#efefef;" | Intel
|-
|-
| 8031
| 8085
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM404]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | Max
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 8035
| 8086
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM411]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" |  
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 8039
| 8088
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM411]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" |  
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 8048
| colspan="4" style="font-style:italic; background-color:#efefef;" | Motorola
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 8049
| 6800
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM407]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" |  
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 8051
| 6802
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM407]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" |  
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 8080
| 6809
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | Max
| style="text-align: center;" | PM101 Opt 01
| style="text-align: center;" | ?
|-
|-
| 8085
| 6809E
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | [[PM104]]
| style="text-align: center;" | Max
| style="text-align: center;" | X
| style="text-align: center;" | 10 MHz
|-
|-
| 8086
| 68000
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM412]]
| style="text-align: center;" | [[PM106]]
| style="text-align: center;" |  
| style="text-align: center;" | X
| style="text-align: center;" | 8 MHz
|-
|-
| 8088
| colspan="4" style="font-style:italic; background-color:#efefef;" | Zilog
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM107]]
| style="text-align: center;" | X
| style="text-align: center;" | 5 MHz
|-
|-
| 8748
| Z80
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM402]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | Max
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 8751
| colspan="4" style="font-style:italic; background-color:#efefef;" | Other Microprocessor
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Motorola
| 6502/C02
| style="text-align: center;" | [[PM403]]
| style="text-align: center;" | Max
|-
|-
| 6800
| colspan="4" style="font-style:italic; background-color:#efefef;" | Other
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM102]]
| style="text-align: center;" | X
| style="text-align: center;" | 2 MHz
|-
|-
| 6801
| STD
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM405]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | Max
| style="text-align: center;" | [[061-6000-00]] Application manual
|}
| style="text-align: center;" | ?
 
==Tektronix [[1205]]==
*In catalog 1988-1989
{| class="wikitable"
|[[File:Tek 1205 2.jpg|140px|]]
! colspan="6" style="text-align: center; font-weight:bold;" | Tektronix [[1205]]
|-
|-
| 6802
! Microprocessor
| style="text-align: center;" | FM, DM
! Probe adapter
| style="text-align: center;" | [[PM103]]
! Acq. boards required
| style="text-align: center;" | X
! Acq. probes required
| style="text-align: center;" | 6 MHz
! Fastest clock supported
|-
|-
| 6803
| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6000-00]] Application manual
| style="text-align: center;" | ?
|-
|-
| 6808
| Z80
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM302]]
| style="text-align: center;" | [[PM103]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | None
| style="text-align: center;" | 4 MHz
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other
|-
|-
| 6809
| 6502/C02
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM303]]
| style="text-align: center;" | [[PM111]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 8 MHz
| style="text-align: center;" | None
| style="text-align: center;" | 4 MHz
|-
|-
| 6809E
| General
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM301]]
| style="text-align: center;" | [[PM111]]
| style="text-align: center;" | X
| style="text-align: center;" | X
| style="text-align: center;" | 8 MHz
| style="text-align: center;" | None
| style="text-align: center;" | 4 MHz
|}
 
==Tektronix [[1230]]==
*In catalog 1989-1993
* The [[1230DPA]] is required for all DPXXXX probes.
* All acquisition boards are [[1230E1]].
* All of the needed software is included with the personality module.
 
Note from operators manual:
<blockquote>
''DISASSEMBLY DISPLAY''
 
''Microprocessor disassembly is  an option for the analyzer. When you power up with an optional microprocessor probe connected, the analyzer asks if you want to  use the setup for the microprocessor probe. If you want to use the microprocessor probe's setup, press ENTER to load it.  Otherwise, press MENU to preserve the current analyzer setup and access the normal analyzer menus. Disassembly information is discussed in  the operator's manual for each microprocessor disassembly probe. ''
</blockquote>
 
{| class="wikitable"
|[[File:Tek 1230.jpg|140px|]]
! colspan="6" style="text-align: center; font-weight:bold;" | Tektronix [[1230]]
|-
|-
| 68000
! Microprocessor
| style="text-align: center;" | FM, DM
! IC package
| style="text-align: center;" | [[PM109]]
! Probe adapter
| style="text-align: center;" | X
! Acq. boards required
| style="text-align: center;" | 10 MHz
! Acq. probes required
! Fastest clock supported
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Zilog
| colspan="6" style="font-style:italic; background-color:#efefef;" | Intel
|-
|-
| Z80
| 8031/8051
| style="text-align: center;" | FM, DM
| style="text-align: center;" | DIP
| style="text-align: center;" | [[PM105]]
| style="text-align: center;" | [[DP8031D]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | None
| style="text-align: center;" | 12 MHz
|-
|-
| Z8001
| 8085
| style="text-align: center;" | FM, DM
| style="text-align: center;" | DIP
| style="text-align: center;" | [[PM110]]
| style="text-align: center;" | [[PM404]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 6 MHz
| style="text-align: center;" | 6 MHz
|-
|-
| Z8002
| 8086
| style="text-align: center;" | FM, DM
| style="text-align: center;" | DIP
| style="text-align: center;" | [[PM108]]
| style="text-align: center;" | [[PM411]],[[DP8086D]]
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | 4 MHz
| style="text-align: center;" | None
| style="text-align: center;" | 10 MHz
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Texas Instruments
| 8087
|-
| style="text-align: center;" | DIP
| TMS9900
| style="text-align: center;" | [[DP8031D]] [[DP8086D]]
| style="text-align: center;" | STD, DM
| style="text-align: center;" | ?
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | None
| style="text-align: center;" | [[061-6002-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | ?
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Other microproscessor
| 8088
| style="text-align: center;" | DIP
| style="text-align: center;" | [[PM411]],[[DP8086D]]
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | 10 MHz
|-
|-
| 1802
| 80186
| style="text-align: center;" | STD, DM
| style="text-align: center;" | PGA
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[DP186P]]
| style="text-align: center;" | [[061-6001-00]] Application manual
| style="text-align: center;" | 3
| style="text-align: center;" | ?
| style="text-align: center;" | None
| style="text-align: center;" | 10 MHz
|-
|-
| 6502
| 80188
| style="text-align: center;" | FM, DM
| style="text-align: center;" | PGA
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[DP186P]]
| style="text-align: center;" | PM101 Opt 02
| style="text-align: center;" | 3
| style="text-align: center;" | ?
| style="text-align: center;" | None
| style="text-align: center;" | 10 MHz
|-
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | BUS
| 8096/7
| style="text-align: center;" | PLCC
| style="text-align: center;" | [[DP96PL]]
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | 12 MHz
|-
|-
| MULTIBUS
| 80C196
| style="text-align: center;" | CM, STD, DM
| style="text-align: center;" | PLCC
| style="text-align: center;" | [[PM112]]
| style="text-align: center;" | [[DP96PL]]
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | ?
| style="text-align: center;" | None
|}
| style="text-align: center;" | 12 MHz
 
==Tektronix [[DAS9200]]==
* (*1) [[92A60]] or [[92A90]] pobes can be used.
* (*2) Only [[92A90]] probes can be used.
* See the 1993 Tektronix catalog page 155-157 for the full list
{| class="wikitable"
|[[File:DAS9200(1).jpg|140px|]]
! colspan="6" style="text-align: center; font-weight:bold; background-color:#efefef;" | Tetkronix [[DAS9200]]
|-
|-
! Microprocessor
| 80286
! IC package
| style="text-align: center;" | PGA
! Software
| style="text-align: center;" | [[DP286PL]]
! Probe adapter
| style="text-align: center;" | 3
! Probe required
| style="text-align: center;" | None
! Fastest clock supported
| style="text-align: center;" | 12.5 MHz
|-
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Intel
| 80287
| style="text-align: center;" | PGA
| style="text-align: center;" | [[DP286PL]]
| style="text-align: center;" | 3
| style="text-align: center;" | None
| style="text-align: center;" | 12.5 MHz
|-
|-
| 8085
| 80286
|  
| style="text-align: center;" | PLCC
| style="text-align: center;" | [[92DM02]]
| style="text-align: center;" | [[DP286P]]
| style="text-align: center;" | [[92DM02]]
| style="text-align: center;" | 3
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 12.5 MHz
|-
|-
| 8086
| 80287
| DIP
| style="text-align: center;" | PLCC
| style="text-align: center;" | [[92DM03]]
| style="text-align: center;" | [[DP286P]]
| style="text-align: center;" | [[92DM03]]
| style="text-align: center;" | 3
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 12.5 MHz
|-
|-
| 8088
| 80386SX
| DIP
| style="text-align: center;" | PQFP
| style="text-align: center;" | [[92DM04]]
| style="text-align: center;" | [[DP386SX]]
| style="text-align: center;" | [[92DM04]]
| style="text-align: center;" | 3
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 16 MHz
|-
|-
| 80186
| 80387SX
| LCC/PGA
| style="text-align: center;" | PQFP
| style="text-align: center;" | [[92DM05]]
| style="text-align: center;" | [[DP386SX]]
| style="text-align: center;" | [[92DM05]]
| style="text-align: center;" | 3
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | 16 MHz
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Motorola
|-
| 6800
| style="text-align: center;" | DIP
| style="text-align: center;" | [[PM407]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 80188
| 6802
| LCC/PGA
| style="text-align: center;" | DIP
| style="text-align: center;" | [[92DM06]]
| style="text-align: center;" | [[PM407]]
| style="text-align: center;" | [[92DM06]]
| style="text-align: center;" | 2
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
| 80286
| LCC/PGA
| style="text-align: center;" | [[92DM08]]
| style="text-align: center;" | [[92DM08]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 80386
|
| style="text-align: center;" | [[92DM09]]
| style="text-align: center;" | [[92DM09]]
| style="text-align: center;" | *2
| style="text-align: center;" | Max
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Motorola
|-
|-
| 6809
| 6809
|  
| style="text-align: center;" | DIP
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | 2
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 2 MHz
|-
|-
| 6809E
| 6809E
|  
| style="text-align: center;" | DIP
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | 2
| style="text-align: center;" | NA
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 2 MHz
|-
| 68HC11
| style="text-align: center;" | All
| style="text-align: center;" | [[DPHC11Q]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 12 MHz
|-
|-
| 68000
| 68000
| DIP
| style="text-align: center;" | DIP
| style="text-align: center;" | [[92DM25]], or [[92DM27]]
| style="text-align: center;" | [[PM412]],[[DP68KD]]
| style="text-align: center;" | [[92DM25]], or [[92DM27]]
| style="text-align: center;" | 3
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 16 MHz
|-
|-
| 68000
| 68000
| PGA
| style="text-align: center;" | PGA
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | [[DP68KP]]
| style="text-align: center;" | ?
| style="text-align: center;" | 3
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 16 MHz
|-
|-
| 68010
| 68010
| DIP
| style="text-align: center;" | DIP
| style="text-align: center;" | [[92DM27]]
| style="text-align: center;" | [[DP68KD]]
| style="text-align: center;" | [[92DM27]]
| style="text-align: center;" | 3
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 16 MHz
|-
|-
| 68010
| 68010
| PGA
| style="text-align: center;" | PGA
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | [[DP68KP]]
| style="text-align: center;" | ?
| style="text-align: center;" | 3
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 16 MHz
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
|-
|-
| 68020
| Z-80
|  
| style="text-align: center;" | DIP
| style="text-align: center;" | [[92DM31]]
| style="text-align: center;" | [[PM402]]
| style="text-align: center;" | [[92DM31]]
| style="text-align: center;" | 2
| style="text-align: center;" | *2
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other Microprocessors
|-
|-
| 68030
| 6502/C02
|  
| style="text-align: center;" | DIP
| style="text-align: center;" | [[92DM33]]
| style="text-align: center;" | [[PM403]]
| style="text-align: center;" | [[92DM33]]
| style="text-align: center;" | 2
| style="text-align: center;" | ?
| style="text-align: center;" | None
| style="text-align: center;" | ?
| style="text-align: center;" | Max
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other
|-
|-
| 68040
| STD
|  
| style="text-align: center;" |  
| style="text-align: center;" | ?
| style="text-align: center;" | [[PM405]]
| style="text-align: center;" | ?
| style="text-align: center;" | 2
| style="text-align: center;" | ?
| style="text-align: center;" | None
| style="text-align: center;" | ?
| style="text-align: center;" | 12.5 MHz
|-
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
| GPIB
| style="text-align: center;" |
| style="text-align: center;" | [[DPGPIB]]
| style="text-align: center;" | Any
| style="text-align: center;" | None
| style="text-align: center;" | 10 MHz
|-
|-
| Z-80
| RS-232
|
| style="text-align: center;" |  
| style="text-align: center;" | [[92DM41]]
| style="text-align: center;" | [[A6740G]]
| style="text-align: center;" | [[92DM41]]
| style="text-align: center;" | Any
| style="text-align: center;" | *1
| style="text-align: center;" | None
| style="text-align: center;" | Max
| style="text-align: center;" | 19.2 K baud
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other microprocessors
|-
| F9450
|
| style="text-align: center;" | [[92DM64]]
| style="text-align: center;" | Use [[92DM64]] with option 13 for non-MMU, else use without.
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 1705A
|
| style="text-align: center;" | [[92DM64]]
| style="text-align: center;" | Need adapter for emulator PIAs
| style="text-align: center;" | *1
| style="text-align: center;" | 40 MHz
|}
|}


[[Category:Logic analyzer personality modules]]
==Tektronix [[Prism 3002]]==
[[Category:ROM packs]]
*Introduced 1990
 
==Tektronix [[3001 GPX]]==
*Introduced 1993
*To run disassembly software, you must use a 3001GPX, 3001MPX, or 3001MPM.
 
==Tektronix [[TLA 700]]==
*Introduced 1997-1998
Floopy
1,332

edits

Retrieved from "https://w140.com/tekwiki/wiki/Special:MobileDiff/79253...97637"