DC504A: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(Redirected page to DC504)
 
No edit summary
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
#redirect [[DC504]]
{{TM500 | mfg=Tektronix | type=DC504A | function=100 MHz, 6-digit frequency counter | class=counter | image=Tek dc504a.JPG  | introduced=1984 | discontinued=1993 |
designers= |manuals=
* [[Media:070-4291-00.pdf|DC504A Manual]] (OCR)
}}
It replaced the [[DC504]].
 
{{BeginSpecs}}
{{Spec|Resolution          | 6 digits}}
{{Spec|Frequency Range      | DC (AC coupled: 10 Hz) to 100 MHz (rear interface 50 MHz) }}
{{Spec|Sensitivity          | 30 mV<sub>RMS</sub> sine wave to 100 MHz, 85 mV<sub>p-p</sub> pulse ≥5 ns }}
{{Spec|Input impedance      | 1 MΩ // 25 pF (rear interface 50 Ω) }}
{{Spec|Gate time            | 10 ms to 10 s in decade steps (autoranging 10 ms to 1 s) }}
{{Spec|Trigger Level Range  | ±2 V × attenuator setting }}
{{Spec|Totalize mode        | 1–999999 counts up to 10 MHz }}
{{Spec|Frequency Resolution | kHz ranges: 0.1 Hz; 1 Hz and 10 Hz (7 digit resolution possible in overflow kHz position); MHz ranges: 100 Hz, 1 kHz (9 digit resolution possible in overflow kHz position) }}
{{Spec|Period resolution    | ms ranges: 1 µs, 10 µs; s ranges: 10 ms, 1 ms, 0.1 ms}}
{{Spec|Display Time        | Variable  ~0.1 s ... ~10 s and HOLD mode}}
{{Spec|Time Base            | 10 MHz, ±1×10<sup>-7</sup>, ±5 ppm from 0°C to +50°C, ±1×10<sup>-6</sup> per year, Adjustable to within 5×10<sup>-8</sup>}}
{{EndSpecs}}
 
==Differences to DC504==
The DC504A adds a 6<sup>th</sup> display digit, extends the frequency range to 100 MHz, and single-shot resolution to 100 ns.
It adds autorange and averaging, and a PLL that multiplies frequencies from 10 Hz to 25 kHz by 100.
 
Unlike its predecessor, the DC504A has no digital outputs on the rear interface, only signal and clock inputs.  There is no int/ext front panel switch (replaced by an internal jumper), and no RPM mode/jumper.
 
==Links==
{{Documents|Link=DC504A}}
{{PatentLinks|DC504A}}
 
==Internals==
The DC504A is built around an [[Intersil ICM7226]] counter/7-segment driver IC.  The prescaler for 10−100 MHz is an [[MC10138]] ECL counter.  The ×100 PLL circuit uses a CD4046.
 
==Rear Interface==
* 16A − Signal input (GND on 17A)
* 14A − External Clock (GND on 15A)
 
==Pictures==
<gallery>
Tek dc504a.JPG            | DC504A
Tek dc504a front.jpg      | DC504A
DC504A_Left_Internal.jpg  | DC504A left internal
DC504A_Right_Internal.jpg | DC504A right internal
DC504A_3-4_View.jpg      | DC504A 3/4 view
</gallery>
 
==Components==
{{Parts|DC504A}}

Latest revision as of 04:47, 31 October 2024

Tektronix DC504A
100 MHz, 6-digit frequency counter
Tektronix DC504A

Produced from 1984 to 1993

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix DC504A is a 100 MHz, 6-digit frequency counter plug-in for the TM500 system.

It replaced the DC504.

Key Specifications

Resolution 6 digits
Frequency Range DC (AC coupled: 10 Hz) to 100 MHz (rear interface 50 MHz)
Sensitivity 30 mVRMS sine wave to 100 MHz, 85 mVp-p pulse ≥5 ns
Input impedance 1 MΩ // 25 pF (rear interface 50 Ω)
Gate time 10 ms to 10 s in decade steps (autoranging 10 ms to 1 s)
Trigger Level Range ±2 V × attenuator setting
Totalize mode 1–999999 counts up to 10 MHz
Frequency Resolution kHz ranges: 0.1 Hz; 1 Hz and 10 Hz (7 digit resolution possible in overflow kHz position); MHz ranges: 100 Hz, 1 kHz (9 digit resolution possible in overflow kHz position)
Period resolution ms ranges: 1 µs, 10 µs; s ranges: 10 ms, 1 ms, 0.1 ms
Display Time Variable ~0.1 s ... ~10 s and HOLD mode
Time Base 10 MHz, ±1×10-7, ±5 ppm from 0°C to +50°C, ±1×10-6 per year, Adjustable to within 5×10-8

Differences to DC504

The DC504A adds a 6th display digit, extends the frequency range to 100 MHz, and single-shot resolution to 100 ns. It adds autorange and averaging, and a PLL that multiplies frequencies from 10 Hz to 25 kHz by 100.

Unlike its predecessor, the DC504A has no digital outputs on the rear interface, only signal and clock inputs. There is no int/ext front panel switch (replaced by an internal jumper), and no RPM mode/jumper.

Links

Documents Referencing DC504A

(no results)

Internals

The DC504A is built around an Intersil ICM7226 counter/7-segment driver IC. The prescaler for 10−100 MHz is an MC10138 ECL counter. The ×100 PLL circuit uses a CD4046.

Rear Interface

  • 16A − Signal input (GND on 17A)
  • 14A − External Clock (GND on 15A)

Pictures

Components

Some Parts Used in the DC504A

Part Part Number(s) Class Description Used in
2N4249 151-0342-00 Discrete component PNP Si low noise amp. DC501 DC502 DC503 DC503A DC504 DC504A DC505 DC505A DC508 DC508A DC509 DC510
ICM7226 156-1655-00 Monolithic integrated circuit 8-decade counter and 7-segment driver DC504A DC5004