SD-14: Difference between revisions
Jump to navigation
Jump to search
(cat) |
mNo edit summary |
||
| (6 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
{{Plugin Sidebar | |||
|manufacturer=Tektronix | |||
|series=11800-series scopes | |||
|type=SD-20 | |||
|summary=3 GHz High Impedance Probe Sampler | |||
|image=Sd 14.jpg | |||
|caption=Tektronix SD-14 | |||
|introduced=1991 | |||
|discontinued=(?) | |||
|designers= | |||
|manuals= | |||
* [[Media:070-8286-01.pdf|Tektronix SD-14 User Manual]] | |||
* [[Media:070-8285-01.pdf|Tektronix SD-14 Service Manual]] | |||
* [[Media:063-2011-01.pdf|Tektronix SD-14 Opt 01 Instructions]] | |||
}} | |||
The '''Tektronix SD-14 High Impedance Probe Sampler''' is a dual-channel, 3 GHz probe sampler designed for high-impedance (100 kΩ) signal acquisition. | |||
It consists of two samplers, each attached at the end of a 1-meter cable. Applications include high-speed device characterization such as ECL, CMOS, ACL and GaAs testing. | |||
Option 01 adds a longer probe tip, two probe-to-board adapters, and two probe-to-SMB adapters. These ease probing of plated holes (as found in Outboards for IC testers) and semi-permanent connections. | |||
In conjunction with the [[11801C]] and [[SM-11|SM-11 multi-channel unit]], it is possible to configure up to 136 channels of high-impedance acquisition with accuracy approaching 140 ps. | |||
{{BeginSpecs}} | |||
{{Spec | Rise time | <140 ps}} | |||
{{Spec | Bandwidth | 3 GHz typical}} | |||
{{Spec | Input impedance | 100 kΩ // 0.5 pF }} | |||
{{Spec | Dynamic range | 7 V (±3.5 V offset) }} | |||
{{Spec | Maximum safe input voltage | ±15 V dc + peak ac }} | |||
{{Spec | Time matching range | 350 ps}} | |||
{{Spec | Displayed noise | 8 mV<sub>RMS</sub> max}} | |||
{{EndSpecs}} | |||
==Pictures== | |||
<gallery> | <gallery> | ||
Sd 14.jpg | |||
Sd 14 probes.jpg | |||
Sd-14 connector.jpg | |||
</gallery> | </gallery> | ||
[[Category:11800 series sampling plugins]] | [[Category:11800 series sampling plugins]] | ||
Latest revision as of 03:58, 24 October 2023
The Tektronix SD-14 High Impedance Probe Sampler is a dual-channel, 3 GHz probe sampler designed for high-impedance (100 kΩ) signal acquisition.
It consists of two samplers, each attached at the end of a 1-meter cable. Applications include high-speed device characterization such as ECL, CMOS, ACL and GaAs testing. Option 01 adds a longer probe tip, two probe-to-board adapters, and two probe-to-SMB adapters. These ease probing of plated holes (as found in Outboards for IC testers) and semi-permanent connections.
In conjunction with the 11801C and SM-11 multi-channel unit, it is possible to configure up to 136 channels of high-impedance acquisition with accuracy approaching 140 ps.
Key Specifications
| Rise time | <140 ps |
|---|---|
| Bandwidth | 3 GHz typical |
| Input impedance | 100 kΩ // 0.5 pF |
| Dynamic range | 7 V (±3.5 V offset) |
| Maximum safe input voltage | ±15 V dc + peak ac |
| Time matching range | 350 ps |
| Displayed noise | 8 mVRMS max |
