2754: Difference between revisions

← Older edit

2754 (view source)

Revision as of 09:33, 12 October 2023

770 bytes removed , 12 October 2023

no edit summary

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

36,756

edits

@@ Line 9: / Line 9: @@
 |discontinued=1993
 |manuals=
-* [[Media:070-6096-00.pdf|Tektronix 2754/2754P Operators Manual]] (PDF, OCR) {Valuetronics scan}
+* [[Media:070-6096-00.pdf|Tektronix 2754/2754P Operators Manual]] (OCR)
-* [[Media:070-6097-00.pdf|Tektronix 2754/2754P Service Manual Vol1]] (PDF, OCR)
+* [[Media:070-6097-00.pdf|Tektronix 2754/2754P Service Manual Vol1]] (OCR)
-* [[Media:070-6099-00.pdf|Tektronix 2754P Programmers Manual]] (PDF, OCR) {Valuetronics scan}
+* [[Media:070-6099-00.pdf|Tektronix 2754P Programmers Manual]] (OCR)
-* [[Media:Tek_2754_Catalog_Spec_1987.pdf| Tektronix 2754 Introduction Spec]] (PDF, OCR)
+* [[Media:Tek_2754_Catalog_Spec_1987.pdf| Tektronix 2754 Introduction Spec]] (OCR)
-* [[Media:Tek_2754_Catalog_Spec_1991.pdf| Tektronix 2754 Final Spec]] (PDF, OCR)
+* [[Media:Tek_2754_Catalog_Spec_1991.pdf| Tektronix 2754 Final Spec]] (OCR)
 * [[Media:26W-7045.pdf|Random Noise Measurement with the Spectrum Analyzer]]
 }}
@@ Line 21: / Line 21: @@
 Additional features include: Continuous Resolution Frequency Tuning, Up to 80 dB Viewable Dynamic Range, Built-in Frequency Counters Provide Frequency Determination to within 0.0000001%, Sensitivities to -134 dBm, Built-in Intelligence for Signal Processing/Marker Functions, Push Button Occupied-Bandwidth/Noise Normalization Functions, Macro Capability with Nonvolatile Memory, Optional Switch-Selectable 50/75Ω Impedances, Direct Screen Data Plots without a Controller, and optional MATE/CIIL Compatibility for Military Applications.
-Front panel inputs/outputs are: RF INPUT 50Ω [[N connector]] (Input connector for RF signals to 21 GHz.  If input signal has a dc component use a blocking capacitor in line with the signals); CAL OUT [[BNC connector]] (Calibrator output provides -20 dBm 100 MHz signal and a comb of frequency markers 100 MHz apart); 1ST LO OUTPUT [[SMA connector]] (Provides access to the output of the 1st local oscillator.  Must be terminated into 50 Ω when they are not connector to an external device); 2ND LO OUTPUT [[SMA connector]] (Provides access to the output of the 2nd local oscillator.  Must be terminated into 50 Ω when they are not connector to an external device); and Camera Power .
-Rear panel inputs/outputs are: PROBE POWER (Provides operating voltages (+5 V, -15 V, +15 V; 100 mA max each) for active probes); HORIZ|TRIG (EXT IN) [[BNC connector]] (A dual function connector: When in External Triggering mode the connector is an AC coupled input for trigger signals.  When the TIME/DIV selection is EXT the connector is a DC coupled input for horizontal sweep voltages); MARKER|VIDEO (EXT IN) [[BNC connector]] (Interfaces to a Tektronix 1405 TV Adapter to display an externally-generated marker); EXT REF IN [[BNC connector]] (A 50Ω input for a 1, 2, 5, or 10 MHz external reference signal; HORIZ (OUTPUT) [[BNC connector]] (Supplies a 0.5 V/div horizontal signal); VERT (OUTPUT) [[BNC connector]] (Provides access to the video signal with 0.5 V for each division of displayed video above or below the center line.); PEN LIFT (OUTPUT) [[BNC connector]] (Provides access to a TTL compatible signal to lift the pen of a chart recorder during sweep retrace.  In Opt. 42 instruments, use this connector to input external video signals if pin 1 of the ACCESSORIES connector is grounded); 10 MHz IF (OUTPUT) [[BNC connector]] (Provides access to the output of the 10 MHz IF); J104 ACCESSORY female [[DB25 connector]] (Provides bidirectional access to the instrument bus)); IEEE STD 488 PORT [[GPIB interface]].
 {{BeginSpecs}}
@@ Line 33: / Line 29: @@
 {{Spec | Maximum Safe Input Power |
 * CW Power: 1 Watt (+30 dBm);
-* Pulse Power: 75 W peak (1 µS pulse width, 0.1% duty factor) }}
+* Pulse Power: 75 W peak (1 µs pulse width, 0.1% duty factor) }}
 {{Spec | RF Attenuator | 0 dB to 60 dB, 10 dB steps }}
 {{Spec | Reference Level | -117 dBm to +40 dBm (+30 dBm maximum safe input) }}
@@ Line 44: / Line 40: @@
 {{Spec | Dynamic Range (Compression to noise) | 134 dBm }}
 {{Spec | Calibrator (Cal out) | 50Ω, -20 dBm ±0.3 dB at 100 MHz }}
-{{Spec | Included Accessories |Operator’s Manual; Programmer’s Manual; 6-ft, 50Ω coaxial cable, N-N; 18-inch, 50Ω coaxial cable, BNC-BNC; N male to BNC female adapter; rear connector shield; power cord, power cord clamp, and spare fuses; CRT filter set consisting of amber and gray light filters plus mesh filter }}
+{{Spec | Included Accessories |Operator’s Manual; Programmer’s Manual; 6 ft, 50Ω coaxial cable, N-N; 18-inch, 50Ω coaxial cable, BNC-BNC; N male to BNC female adapter; rear connector shield; power cord, power cord clamp, and spare fuses; CRT filter set consisting of amber and gray light filters plus mesh filter }}
 {{Spec | Weight | 27 kg (60 lbs) }}
 {{Spec | Power | 90 − 132 V<sub>AC</sub>, 48 to 448 Hz; 180 – 250 V<sub>AC</sub>, 48 to 72 Hz.  At 115 V<sub>AC</sub>, 60 Hz, 210 W max with all options }}
 {{Spec | Operating Atmospherics | Temperatures: 0 °C to +50 °C; Humidity: 95% below +30 °C, 75% above +30 °C, 45% above +40 °C; Altitude: Up to 3 km (10,000 ft) }}
 {{Spec | GPIB Characteristics | P Version: In accordance with IEEE Standard 488-1978 implemented as SH1, AH1, T5, L3, SR1, RL1, PP1, DC1, DT1, and C0; Non-P Version (Plotter Output): Implemented as SH1, AH0, T3, L0, SR0, RL0, PP0, DC0, DT0, and C0 }}
 {{EndSpecs}}
-==Options==
+===Options===
+<small>
 * Opt. 01: Add preselector for the 1.7 to 21 GHz band and limiter for 1st mixer below 1.8 GHz
 * Opt. 07: 75Ω dBmV input and calibration in addition to 50Ω dBm input and calibration; Includes BNC male to female adapter connector, 42 inch BNC to BNC connector 75Ω coax cable
@@ Line 65: / Line 61: @@
 * Opt. 42: Replaces MARKER/VIDEO input port on the rear panel with a 110 MHz IF output port that provides a 3 dB signal bandwidth ≥4.5 MHz
 * Opt. 52: North American 220V configuration with standard power cord.  Fuses are replaced with 2 A slo-blo
+</small>
+===Connectors===
+'''Front panel:''' RF INPUT [[N connector]] (50 Ω, +30 dBm Max, no DC blocking capacitor); CAL OUT [[BNC connector]] (-20 dBm 100 MHz comb); 1ST LO OUTPUT [[SMA connector]] (Must be terminated into 50 Ω); 2ND LO OUTPUT [[SMA connector]] (Must be terminated into 50 Ω); Camera Power.
+'''Rear panel:''' PROBE POWER (+5 V, -15 V, +15 V; 100 mA max each); HORIZ|TRIG (EXT IN) [[BNC connector]] (In External Triggering mode, AC coupled input for trigger signals; when TIME/DIV selection is EXT, DC coupled input for horizontal sweep voltages); MARKER|VIDEO (EXT IN) [[BNC connector]] (Interfaces to a Tektronix [[1405]] TV Adapter to display an externally-generated marker); EXT REF IN [[BNC connector]] (50 Ω input for a 1, 2, 5, or 10 MHz external reference signal); HORIZ (OUTPUT) [[BNC connector]] (0.5 V/div horizontal signal); VERT (OUTPUT) [[BNC connector]] (video signal with 0.5 V/div.); PEN LIFT (OUTPUT) [[BNC connector]] (TTL compatible signal, high = lift pen;  In Opt. 42 instruments, external video input if pin 1 of the ACCESSORIES connector is grounded); 10 MHz IF (OUTPUT) [[BNC connector]]; J104 ACCESSORY female [[DB25 connector]] (bidirectional access to the instrument bus)); IEEE STD 488 PORT [[GPIB interface]].
+==Links==
+{{Documents|Link=2754}}
 ==Pictures==