543: Difference between revisions
(template) |
(template change) |
||
Line 4: | Line 4: | ||
image=Tek 543 front.jpg | | image=Tek 543 front.jpg | | ||
caption=Tektronix 543 front | | caption=Tektronix 543 front | | ||
introduced=1958 | | |||
discontinued=(?) | | |||
manuals= | manuals= | ||
* [http://bama.edebris.com/download/tek/543/Tek%20543.pdf Tektronix 543 Manual (PDF)] | * [http://bama.edebris.com/download/tek/543/Tek%20543.pdf Tektronix 543 Manual (PDF)] |
Revision as of 04:56, 17 August 2014
The Tektronix Type 543 is an all-tube 30 MHz scope introduced in 1958. It takes letter-series and 1-series plug-ins. It is similar to a 545, but without the second, delayed timebase. Instead, it has a range of horizontal magnifiers from ×2 to ×100. It has the same six-stage balanced distributed amplifier (twelve 6DK6 tubes) as the 545.
While the 545 has two non-calibrated X-input sensitivities, the 543 has an X-input with three calibrated selectable deflection sensitivities: 0.1 V/cm, 1 V/cm, and 10 V/cm.
The standard CRT for the 543 is the T65 with P2 phosphor, part number 154-175. The standard CRT for the 543B is part number 154-0478-00, also known as the T5470-31-2.
The total acceleration voltage on the CRT is 10 kV. The CRT power supply uses five 5642 HV tube diodes.
543B is a hybrid and vertical delay line have no 6DK6 and LC but 186 ohms delay line.
Specifications
please add
Pictures
-
543
-
543
-
543
-
543
-
543
-
543
-
RM543B
-
RM543B side
-
543B
-
543B
-
543 Block Diagram
-
543 Horizontal Amplifier
-
543 Vertical Amplifier
-
543 Trigger
-
543 Timebase
-
543 Delay Line
-
543 CRT Circuit
-
543 Low-Voltage Power Supply
-
543 Calibrator