1A5: Difference between revisions
(template, cat) |
m (-) |
||
| Line 10: | Line 10: | ||
* [http://w140.com/mmm/tek-1a5.pdf Tektronix 1A5 Manual (PDF)] | * [http://w140.com/mmm/tek-1a5.pdf Tektronix 1A5 Manual (PDF)] | ||
}} | }} | ||
The '' | The '''Tektronix Type 1A5''' is a differential amplifier plug-in for [[500-series scopes]]. | ||
Bandwidth is 50 MHz down to 5 mV/div. The maximum differential sensitivity is 1 mV/div, with a bandwidth of 40 MHz. Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20 MHz. | Bandwidth is 50 MHz down to 5 mV/div. The maximum differential sensitivity is 1 mV/div, with a bandwidth of 40 MHz. Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20 MHz. | ||
Revision as of 06:05, 20 August 2014
Template:Plugin Sidebar 2 The Tektronix Type 1A5 is a differential amplifier plug-in for 500-series scopes.
Bandwidth is 50 MHz down to 5 mV/div. The maximum differential sensitivity is 1 mV/div, with a bandwidth of 40 MHz. Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20 MHz.
Like most Tektronix differential plug-ins, it has three modes: VA-VC, VA-VB, and VC-VB. VC is controlled by a ten-turn potentiometer and can vary from -5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).
There is a front-panel jack for direct connection of the Type P6046 Active Differential Probe.
Type 1A5 was introduced in 1967, replacing Types W and Z, and lasted until the end of the classic plug-in scope line in 1974.
Specifications
please add
