067-0587-01: Difference between revisions
(headline) |
No edit summary |
||
| Line 32: | Line 32: | ||
snap-off diode found in other Tektronix fast risetime pulsers. Note that there is a typo | snap-off diode found in other Tektronix fast risetime pulsers. Note that there is a typo | ||
in the service manual for CR80, CR84, and CR85 in the peak-to-peak detector. | in the service manual for CR80, CR84, and CR85 in the peak-to-peak detector. | ||
==Links== | |||
* [http://www.analogdesign.be/vintage-gear/tektronix-067-0587-01-calibration-fixture Tek 067-0587-01 @ analogdesign.be] - photos and description | |||
==Pictures== | ==Pictures== | ||
Revision as of 03:55, 3 May 2015
The 067-0587-01 Calibration Fixture is designed to standardize the horizontal and vertical deflection factors of 7000 series mainframes. It provides a uniform step calibrated deflection factor, a fast risetime step response function and a common-mode input test for both the vertical and trigger systems. It is the predecessor of the 067-0587-02.
Key Specifications
| Risetime | 300 ps |
|---|---|
| Bandwidth | 500 MHz |
Internals
It uses one custom Tektronix IC, the 155-0078-00. The manual says it is a high frequency push-pull amplifier.
It uses one tunnel diode, the 152-0177-00, a 10 mA, 4 pF diode in a DO-17 package. It also uses 12 Tektronix custom Schottky diodes, part 152-0442-00 (speced as matched pairs) in the tunnel diode pulse shaper and in the CW peak-to-peak detector. The service manual calls them "disconnect diodes", physically they look like snap-off diode found in other Tektronix fast risetime pulsers. Note that there is a typo in the service manual for CR80, CR84, and CR85 in the peak-to-peak detector.
Links
- Tek 067-0587-01 @ analogdesign.be - photos and description
