Q: Difference between revisions

Revision as of 11:55, 6 January 2018

Template:Plugin Sidebar 2 The Tektronix Type Q is a transducer and strain gauge preamp plug-in for 500-series scopes.

It can work with resistive, capacitive, or inductive transducers or strain gauges that are attached via an Amphenol 165-15 connector.

The plug-in contains a 25 kHz oscillator that is used to drive a Wheatstone bridge.

Type Q was introduced in 1960 and was the last all-tube plug-in. It was dropped after 1972.

please add

@@ Line 9: / Line 9: @@
 manuals=
 * [http://w140.com/mmm/tek-q.pdf Tektronix Type Q Manual (PDF)]
-* [http://bama.edebris.com/manuals/tek/q/ Tektronix Type Q Manual (BAMA, offline)]
+* [http://bama.edebris.com/manuals/tek/q/ Tektronix Type Q Manual @ BAMA]
 * [http://w140.com/tek_fcp/tek_type_q_factory_cal_proc.pdf Tektronix Type Q Factory Calibration Procedure (PDF)]
 }}
-The '''Tektronix Type Q''' is a strain gauge preamp plug-in for [[500-series scopes]].
+The '''Tektronix Type Q''' is a transducer and strain gauge preamp plug-in for [[500-series scopes]].
-The Type Q contains a 25 kHz oscillator that is used to drive a
-Wheatstone bridge for measuring the impedance of the strain gauge.
+It can work with resistive, capacitive, or inductive transducers or strain gauges that are
-Resistive, capacitive, and inductive strain gauges are supported.
+attached via an [[Amphenol 165 series connectors|Amphenol 165-15 connector]].
+The plug-in contains a 25 kHz oscillator that is used to drive a Wheatstone bridge.
 Type Q was [[introduced in 1960]] and was the last all-tube plug-in.