TDS694: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(Added basic functional specs) |
||
| Line 1: | Line 1: | ||
The '''Tektronix | The '''Tektronix TDS694C''' is a four-channel, 3 GHz, 10 GS/s digital scope. The project codename was 'Screamer'. | ||
{{ | No earlier revisions (TDS694B etc) appear to have been released. | ||
{{BeginSpecs}} | |||
{{SpecGroup|Acquisition}} | |||
{{Spec | Sampling rate | 10 GS/s on each channel simultaneously }} | |||
{{Spec | Analog bandwidth | 3 GHz (all ranges; 10 mV - 1V/div) }} | |||
{{Spec | Inputs | 4 Channels; 50 Ohm (DC/GND) only }} | |||
{{Spec | Resolution | 8 bit }} | |||
{{Spec | Record length | 30K samples per channel; 120K samples with option 1M }} | |||
{{Spec | Modes | sample, envelope, peak detect, average }} | |||
{{SpecGroup|Misc}} | |||
{{Spec | Display | 7" diag (640 x 480) color CRT; Zoom }} | |||
{{Spec | Trigger modes | Edge, logic, pulse }} | |||
{{Spec | Storage | 1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. Internal hard disk drive (2.1 Gb capacity) with Option 2M. NVRAM storage for saving waveforms, hardcopies, and setups. 'Iomega Zip Drive compatible'. }} | |||
{{Spec | I/O | Full GPIB programmability; VGA output }} | |||
{{Spec | Hardcopy output | using GPIB, RS-232, or Centronics ports }} | |||
{{EndSpecs}} | |||
==Pictures== | ==Pictures== | ||
Revision as of 14:06, 4 July 2021
The Tektronix TDS694C is a four-channel, 3 GHz, 10 GS/s digital scope. The project codename was 'Screamer'.
No earlier revisions (TDS694B etc) appear to have been released.
Key Specifications
| — Acquisition — | |
| Sampling rate | 10 GS/s on each channel simultaneously |
| Analog bandwidth | 3 GHz (all ranges; 10 mV - 1V/div) |
| Inputs | 4 Channels; 50 Ohm (DC/GND) only |
| Resolution | 8 bit |
| Record length | 30K samples per channel; 120K samples with option 1M |
| Modes | sample, envelope, peak detect, average |
| — Misc — | |
| Display | 7" diag (640 x 480) color CRT; Zoom |
| Trigger modes | Edge, logic, pulse |
| Storage | 1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. Internal hard disk drive (2.1 Gb capacity) with Option 2M. NVRAM storage for saving waveforms, hardcopies, and setups. 'Iomega Zip Drive compatible'. |
| I/O | Full GPIB programmability; VGA output |
| Hardcopy output | using GPIB, RS-232, or Centronics ports |
Pictures
-
TDS694C
-
TDS694C
-
TDS694C
-
TDS694C
