S Series plug-in interface: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[File:S series plugin interface.jpg|thumb|400px|right]] | [[File:S series plugin interface.jpg|thumb|400px|right]] | ||
The '''[[7000 and 3S series sampling heads|S-series sampling heads]]''' have a 12-pin PCB edge connector with 3.92 mm (0.156") pitch, and an [[SMB connector]] for the trigger pick-off (not on S-6). | The '''[[7000 and 3S series sampling heads|S-series sampling heads]]''' have a 12-pin PCB edge connector with 3.92 mm (0.156") pitch, and an [[SMB connector]] for the trigger pick-off (not on [[S-6]]). | ||
{| class="wikitable" | {| class="wikitable" | ||
Revision as of 08:11, 24 April 2019
The S-series sampling heads have a 12-pin PCB edge connector with 3.92 mm (0.156") pitch, and an SMB connector for the trigger pick-off (not on S-6).
| left | right | ||
|---|---|---|---|
| pin | signal | pin | signal |
| 1 | +15 V | A | −12.2 V |
| 2 | DC offset trig | B | feedback |
| 3 | feedback ground | C | identify & readout |
| 4 | head signal out | D | head signal ground |
| 5 | −50 V | E | +50 V |
| 6 | strobe | F | strobe ground |