531

Manuals – Specifications – Links – Pictures

The Tektronix Type 531 is a 10 MHz oscilloscope that accepts letter-series and 1-series plug-ins. It is exactly like Type 535 except it does not have the Delayed Sweep (dual timebase) feature.

The 531 and 535 were the first Tektronix scopes to accept plug-ins. It was introduced in March 1954 simultaneously with the Type 535, and superseded in 1959 by the Type 531A, which has more convenient controls and a slightly faster (15 MHz) vertical amplifier.

In serial numbers 101 to 7600, the 531's L-C delay line is before the vertical amplifier. In serial numbers 7601 and up, the 531's delay line is between the vertical amplifier and the CRT. This change was the result of John Kobbe's insight that if the far end of the delay line was an open circuit (which the CRT approximates), the reflected wave could be absorbed at the source end. This "single termination" approach made it possible to do away with the output chassis. All Tek scopes using a lumped-constant delay line went to this topology.

There is also a rack-mount version, Types RM31 and RM31A. They have a sliding chassis so that the scope can be serviced without removing it from a rack.

The 532 is similar to the 531, but designed to be more reliable at the expense of slower risetime. The 541 is mostly the same as the 531, but has a distributed vertical amplifier for 30 MHz bandwidth, and a different CRT.

Key Specifications

	— 531 SN 101-7600 —
Bandwidth	DC to 10 MHz (≤ 3 dB) with Type A plug-in
Rise time	0.035 μs
	— 531 SN 7601 up & 531A —
Bandwidth	DC to 15 MHz (≤ 3 dB) with Type K plug-in
Rise time	0.024 μs
	— all —
Line Voltage	108/115/122/216/244 VAC ±10%,selected via primary voltage selector and voltage range selector switches, 50 Hz to 60 Hz.
Thermal Protection	Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level
Power Consumption	475W with plug-in
Cooling	AC Fan
Trigger Modes	AC/DC/AC LF Reject, and HF Sync
Anode Potential	10 kV (relative to cathode)
Screen Area	6 cm × 10 cm
Construction	Aluminum alloy chassis. Anodized front panel
Weight	61,5 lbs / 27,8 kg

Pictures of 531

• 

  early 531 with Type 53C

• 

  Brown-era 531 with Type CA

• 

  Brown-era 531 with Type CA

• 

  Brown-era 531 Rear

Pictures of 531A

• 
• 
• 

  531A on 202 cart

• 

  531A on 500/53cart

• 

  531A Overwiev

• 

  531A Front

• 

  531A Timebase ciruit

• 

  531A Power supply

• 

  531A Rectifier board

• 

  531A Inside left

• 

  531A Vertical amplifier

• 

  531A Inside right

• 

  manual compartment

Pictures of RM31A

• 

  RM31A