2230

Manuals – Specifications – Links – Pictures

The Tektronix 2230 is a portable 100 MHz, dual-channel combination analog / digital storage scope, sister model of 2220 and 2221.

It has both an analog mode and a digital mode. In the digital storage mode, up to three waveform sets (CH 1 and/or CH 2) may be stored in a save ref. memory and recalled for display at a later time.

The 2230 is controlled by an Intel 8088 microprocessor. It features alphanumeric CRT readout of many of the front panel controls. It has a DB-9 auxiliary connector on the right side providing an external clock input as well as an output for an analog X-Y plotter to make permanent copies of the display. This feature can be accessed through the "Mem select" menu.

Some Firmware versions have a diagnostics menu with the Tektronix logo and wizard image.

The Cursor knob is prone to failure. It becomes jittery and will not scroll properly.

Options include RS-232 and GPIB interface boards, and a 26K battery backed memory board.

Key Specifications

	— Vertical —
Input impedance	1 MΩ // 20 pF
Maximum Safe Input Voltage	400 V (dc + peak AC) or 800 Vp-p AC
CMRR	At least 10:1 at 10 MHz
	— Horizontal —
Timebase A	50 ns/Div to 0.5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div. In "Store" mode lower sweep speeds up to 5 s/Div are available
Timebase B	50 ns/Div to 5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div
Bandwidth	100 MHz (analog)
Sampling rate	20 MS/s
Record length	1K or 4K samples (single channel), optional 26K
Z axis	input (intensity); DC to 20 MHz, maximum safe input 30V (dc + peak ac) Input resistance about 10kΩ
CRT	display area : 8 × 10 cm²
Dimensions	With feet and handle: 137 x 361 x 511 mm³
Features	X-Y operation Pre/Post-triggering Averaging Dual time base Cursors and readout GPIB (option 10) RS232-C (option 12)

Links

• Troubleshooting tips on 2200 PSU
• Measuring inductance using a 2230

Internals

Custom Tek chips used include 155-0274-00(A1U130, A1U180), 155-0273-00 (A2U30, A2U80), and 155-0022-00 (A10U2101). There is also a semi-custom part (A10U9208 Display Controller, 156-2452-00).

Pictures

• 
• 
• 
• 
• 
• 2230A Signal Input Board

  2230A Signal Input Board

• 

  2230 interface board

• 

  upper most board