Nelson-Ross PSA-011: Difference between revisions
No edit summary |
No edit summary |
||
| Line 50: | Line 50: | ||
Nelson-ross_011_schem_sm.png|Schematic | Nelson-ross_011_schem_sm.png|Schematic | ||
</gallery> | </gallery> | ||
{{Parts|Nelson-Ross PSA-011}} | |||
[[Category:500 series plugins]] | [[Category:500 series plugins]] | ||
Revision as of 15:14, 10 October 2021
The Nelson-Ross PSA-011 is a spectrum analyzer plug-in for 500-series scopes. The center frequency range is 10 Hz to 20 kHz. It can display amplitude in linear or log scale.
The input is high-impedance and is AC-coupled. The PSA-011 is a single-conversion architecture with a pair of 6BH6 tubes serving as a balanced mixer. After IF filtering and amplification, the signal is detected using a 1N34A germanium diode. The detected voltage from the diode directly drives pin 3 (vertical -) of the scope plug-in interface connector. Pin 1 (vertical +) of the scope plug-in interface connector is fed a DC vertical position voltage by the PSA-011.
The voltage-controlled local oscillator is tuned using a variable-reactance tube, V6, a 6201.
There were at least two major versions produced, without changing the model number. Compare the picture from the manual below with the other front panel photographs.
There was also a tracking generator, called the Nelson Ross 101 SYNCHRO-SWEEP Generator. These are very rare.
Specifications
please add
Pictures
-
Front panel, as shown in manual.
-
Front
-
Front 2
-
Front right
-
Front left
-
Bottom
-
Bottom 2
-
Left
-
Rear right
-
Rear
-
Rear 2
-
Rear 3
-
Schematic
Some Parts Used in the Nelson-Ross PSA-011
| Part | Part Number(s) | Class | Description | Used in |
|---|---|---|---|---|
| 1N34A | Discrete component | germanium point-contact diode | Nelson-Ross PSA-011 | |
| 6201 | Vacuum Tube (Dual Triode) | dual high-gain triode | Nelson-Ross PSA-011 | |
| 6BH6 | 154-0026-00 • 154-0285-00 | Vacuum Tube (Pentode) | pentode | 130 • 162 • 310 • 310A • 512 • 517 • 517A • 524 • Nelson-Ross PSA-011 |