SCD1000: Difference between revisions
m (→top: clean up, replaced: {{Oscilloscope Sidebar → {{Oscilloscope Sidebar |manufacturer=Tektronix |designers=, title=Tektronix → model=) |
No edit summary |
||
Line 1: | Line 1: | ||
{{Oscilloscope Sidebar |manufacturer=Tektronix |designers=| | {{Oscilloscope Sidebar |manufacturer=Tektronix |designers=| | ||
model= SCD1000 | | series=|model= SCD1000 | | ||
summary=1 GHz transient digitizer | | summary=1 GHz transient digitizer | | ||
image=Tek scd1000 front.jpg | | image=Tek scd1000 front.jpg | |
Revision as of 08:37, 10 August 2021
The Tektronix SCD1000 is a transient digitizer based on a scan converter tube. It is similar to a SCD5000, but the SCD1000 has a vertical amplifier instead of direct access. Because of this, the SCD1000 has 100 mV full-scale sensitivity, 50 times more sensitive than the SCD5000. However, the SCD1000 has only 1 GHz vertical bandwidth instead of the SCD5000's 4.5 GHz.
The vertical amplifier uses the 7104's 155-0174-00 delay line compensator, 155-0175-00 trigger amplifier and 155-0176-00 vertical output amplifier, all in Hypcon packages.
Key Specifications
- please add
Pictures
-
Front panel
-
Front panel inputs
-
Delay lines
-
Frontend relays
-
Input board
-
Vertical amplifier (compare the 7104's)
-
Horizontal amplifier
-
Read gun board
-
Card cage
-
Control
-
CPU board (using Motorola 68010)
-
Memory board (with 64k ×4 bit, 25 ns static RAM chips)
-
High Voltage supply
-
Power converter board
-
-
Bottom
-
Rear