Я4С-97: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
(https://eltesta.com/wp-content/uploads/2021/12/Alma_Mater_2021.pdf p.153) |
||
| Line 6: | Line 6: | ||
|image=Я4С-97_front.jpg | |image=Я4С-97_front.jpg | ||
|caption=Я4С-97 front panel | |caption=Я4С-97 front panel | ||
|introduced= | |introduced=1978 | ||
|discontinued=(?) | |discontinued=(?) | ||
|designers= | |designers= | ||
| Line 12: | Line 12: | ||
* to be added | * to be added | ||
}} | }} | ||
The '''Я4С-97''' is a digital multimeter plug-in for [[Soviet 7000-series clones]]. It is roughly analogous to the Tek [[7D13]]. | The '''Я4С-97''' is a digital multimeter plug-in for [[Soviet 7000-series clones]]. It is roughly analogous to the Tek [[7D13]]. | ||
Latest revision as of 16:15, 20 February 2022
The Я4С-97 is a digital multimeter plug-in for Soviet 7000-series clones. It is roughly analogous to the Tek 7D13.
Significant differences to the 7D13 include:
- 2 kV and 20 kV ranges using an external 100:1 probe
- mode and range switches are separate
- probe connector is a Soviet 8-pin rectangular type
- all modes except current need a special probe
Key Specifications
| Voltage ranges | 2 V to 20 kV in decade steps |
|---|---|
| Current ranges | 2 mA to 2 A in decade steps |
| Resistance ranges | 200 Ω to 2 MΩ in decade steps |
| Temperature range | −40 to 120 °C |
The internal architecture of the Я4С-97 seems to be very similar to the 7D13, even down to the 2 kHz clock and the transistor-based temperature sensor (which uses a transistor type 2T3316-1 as the probe). However, there is no DAC included for the readout, because the mainframe readout interface is digital, not analogue.
Links
Pictures
-
Front
-
Three-quarter view
-
Analogue board
-
Switch wiring detail
-
Temperature readout
-
Voltage and resistance probe
-
EHT probe (2 kV and 20 kV)
-
Temperature probe
-
Replacement temperature sensor
-
Probe connector
-
Probe plugged in
