59: Difference between revisions
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
|designers= | |designers= | ||
|manuals= | |manuals= | ||
* [[Media:Tek type 59 irb.pdf|Tektronix Type 59 Instrument Reference Book (OCR | * ''[[Media:070-0262-00.pdf|070-0262-00 manual]] needed'' | ||
* [[Media:Tek type 59 irb.pdf|Tektronix Type 59 Instrument Reference Book]] (OCR) | |||
}} | }} | ||
The '''Tektronix Type 59''' is a 400 kHz amplifier for [[560-series scopes]]. | The '''Tektronix Type 59''' is a 400 kHz amplifier for [[560-series scopes]]. | ||
Revision as of 04:40, 2 November 2022
The Tektronix Type 59 is a 400 kHz amplifier for 560-series scopes. It was introduced in 1960, and at $50 (2015 value: $398) it was the lowest cost model of the 560-series plug-ins.
It does not have a calibrated input attenuator. The Type 59 signal input is a pair of banana plugs.
The manual says
The forward end of the chassis has been left free of circuitry in the anticipation that a user may wish to install additional circuitry to fit the Type 59 module to his own special application.
Key Specifications
| Bandwidth | 400 kHz |
|---|---|
| Deflection | ~ 1 V/Div |
| Input impedance | 250 kΩ |
Internals
The Type 59 plug-in contains two tubes, total. Both are 6BA8 pentode/triodes. A triode cathode-follower buffers the input. Next is a differential amplifier made of two pentodes. The remaining triode is used as the trigger pickoff cathode-follower. The heater of tubes are supplied with 6.3 VAC from the mainframe.
Pictures
-
From 1961 catalog
-
schematic
Some Parts Used in the 59
| Part | Part Number(s) | Class | Description | Used in |
|---|---|---|---|---|
| 6BA8 | 154-0163-00 | Vacuum Tube (Triode/Pentode) | triode-pentode combo | 59 • 2A61 • 72 • 3A72 • 3A2 |
| 6BA8A | 154-0163-00 | Vacuum Tube (Triode/Pentode) | triode-pentode combo | 59 • 3A72 • 526 |