133: Difference between revisions

Revision as of 05:46, 9 May 2014

The Tektronix 133 is an external enclosure and power supply for a letter-series or 1-series plug-in. It was introduced in 1961. The enclosure supplies power to the plug-in and the outputs from the plug-in are available. The bandwidth of the 133's outputs is 100 kHz, which is much slower than the 16 MHz bandwidth of the 132. However, the 133 has a 2 Ω output impedance compared to 5 kΩ for the 132, and the 133 can drive 1.5 amperes at its output, versus a maximum of 10 mA for the 132.

Manual needed

front view
front inside
right view
top view
left view shows power supply and TO-3 output power transistors
bottom view shows solid state rectifiers and capacitors for low-voltage high-current output amplifier

@@ Line 1: / Line 1: @@
 The Tektronix 133 is an external enclosure and power supply for a [[letter-series_and_1-series_plug-ins|letter-series or 1-series plug-in]].  It was [[introduced in 1961]].
 The enclosure supplies power to the plug-in and the outputs from the plug-in are available.
-The bandwidth of the 133's outputs is 100Khz, which is much slower than the 16MHz bandwidth of the [[132]].
+The bandwidth of the 133's outputs is 100 kHz, which is much slower than the 16 MHz bandwidth of the [[132]].
-However, the 133 has a 2-ohm output impedance compared to 5k-ohms for the [[132]].
+However, the 133 has a 2 Ω output impedance compared to 5 kΩ for the [[132]], and the 133 can drive 1.5 amperes at its output, versus a maximum of 10 mA for the [[132]].
-And the 133 can drive 1.5 amperes at its output, versus a maximum of 10mA for the [[132]].
 * [[list of manuals that are needed|Manual needed]]
@@ Line 18: / Line 17: @@
 Image:133bottom.jpg|bottom view shows solid state rectifiers and capacitors for low-voltage high-current output amplifier
 </gallery>
+[[Category:Specifications needed]]
+[[Category:Manual needed]]

133: Difference between revisions

Revision as of 05:46, 9 May 2014

Navigation menu