S-6: Difference between revisions
(link) |
("compatible with" links improved) |
||
| Line 4: | Line 4: | ||
image=Tek-s6-front.jpg | | image=Tek-s6-front.jpg | | ||
caption=S-6 head | | caption=S-6 head | | ||
series=[[ | series=[[3S2]], [[7S11]], [[7S12]] Sampling Plugins |years=1971 – ? | | ||
years=1971 – ? | | |||
manuals= | manuals= | ||
* [http://w140.com/tek_nov1988_s6.pdf Tektronix S-6 Manual (high quality, 1988, PDF)] | * [http://w140.com/tek_nov1988_s6.pdf Tektronix S-6 Manual (high quality, 1988, PDF)] | ||
Revision as of 06:41, 17 July 2014
The Tektronix S-6 Sampling Head plug-in is a 50 Ω feed-through unit with a rise-time of 30 ps and bandwidth of 11.5 GHz. It was introduced in 1971. The S-6 provides two unterminated 50 Ω SMA connections in a loop-through configuration as is convenient for TDR applications.
It is good practice to leave a termination resistor on the unit when unused to give some protection against electrostatic discharge.
Specifications
Key Specifications
| Rise time | 30 ps |
|---|---|
| Bandwidth | 11.5 GHz |
| Input impedance | 50 Ω (unterminated!) |
| Noise | < 5 mV of noise |
| Features |
|
Links
- S-6 internal photo and simulation
- Repairing an S-6 head (with internal photos)
- S-52 at amplifier.cd 7S11 page
- http://www.barrytech.com/tektronix/tek7000/teks52.html
Pictures
-
S-6 front
-
S-6, entire plugin
-
S-6 sampling head and S-52 pulse generator head in a 7S12 TDR/Sampler plugin
Measurements
-
Impulse taken with S6 sampling head. Every dot is equivalent to one sample taken, and combined on the CRT with a rate of app. 100 Hz. Bright dots are newer than dimmed ones.
-
Incident pulse from an S-52 (nom. < 25 ps) displayed by an S-6 head (nom. < 30 ps), both installed in a 7S12. Displayed rise time ~35 ps confirms spec.
