1A5: Difference between revisions
m (-) |
No edit summary |
||
| Line 11: | Line 11: | ||
}} | }} | ||
The '''Tektronix Type 1A5''' is a differential amplifier plug-in for [[500-series scopes]]. | The '''Tektronix Type 1A5''' is a differential amplifier plug-in for [[500-series scopes]]. | ||
There is a front-panel jack for direct connection of the Type [[P6046|P6046 Active Differential Probe]]. | There is a front-panel jack for direct connection of the Type [[P6046|P6046 Active Differential Probe]]. | ||
| Line 21: | Line 17: | ||
==Specifications== | ==Specifications== | ||
Bandwidth is 50 MHz down to 5 mV/div. The maximum differential sensitivity is 1 mV/div, with a bandwidth of 40 MHz. Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20 MHz. | |||
Like most Tektronix differential plug-ins, it has three modes: V<sub>A</sub>-V<sub>C</sub>, V<sub>A</sub>-V<sub>B</sub>, and V<sub>C</sub>-V<sub>B</sub>. V<sub>C</sub> is controlled by a ten-turn potentiometer and can vary from -5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges). | |||
[[Category:Specifications needed]]''please add'' | [[Category:Specifications needed]]''please add'' | ||
Revision as of 23:18, 26 March 2015
Template:Plugin Sidebar 2 The Tektronix Type 1A5 is a differential amplifier plug-in for 500-series scopes.
There is a front-panel jack for direct connection of the Type P6046 Active Differential Probe.
Type 1A5 was introduced in 1967, replacing Types W and Z, and lasted until the end of the classic plug-in scope line in 1974.
Specifications
Bandwidth is 50 MHz down to 5 mV/div. The maximum differential sensitivity is 1 mV/div, with a bandwidth of 40 MHz. Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20 MHz.
Like most Tektronix differential plug-ins, it has three modes: VA-VC, VA-VB, and VC-VB. VC is controlled by a ten-turn potentiometer and can vary from -5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).please add
