Line Sockets: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
An attempt to categorize the various types of line sockets found on older tek scopes
An attempt to categorize the various types of line sockets found on older tek scopes


 
==Twist Lock==
'''Twist Lock'''


Have only seen one on a [[549]] and a [[067-0596-00]].  Was this available as an option on some models?  
Have only seen one on a [[549]] and a [[067-0596-00]].  Was this available as an option on some models?  
Line 10: Line 9:
</gallery>
</gallery>


==3 pin Edison (recessed)==


'''3 pin Edison (recessed)'''
==3 pin Edison (proud)==
 
 
'''3 pin Edison (proud)'''


Found on a majority of the 500 series scopes
Found on a majority of the 500 series scopes


 
==2 pin (recessed)==
'''2 pin (recessed)'''


Found on older, non-plugin scopes, such as the [[514]].  Pin spacing is standard 1/2". Chassis cutout is 1.25", Chassis mount hole spacing is 1.5"  Is the metal ring on the inside of the socket part of the ground connection, as found on some multi-phase twist-lock connectors?
Found on older, non-plugin scopes, such as the [[514]].  Pin spacing is standard 1/2". Chassis cutout is 1.25", Chassis mount hole spacing is 1.5"  Is the metal ring on the inside of the socket part of the ground connection, as found on some multi-phase twist-lock connectors?
Line 26: Line 22:
File:Tek514-lineSocket.jpg | socket on a 514D
File:Tek514-lineSocket.jpg | socket on a 514D
</gallery>
</gallery>
[[Category:Repair issues]]

Revision as of 06:02, 16 January 2016

An attempt to categorize the various types of line sockets found on older tek scopes

Twist Lock

Have only seen one on a 549 and a 067-0596-00. Was this available as an option on some models? This appears to be a Non-NEMA Hubbel Midget twist-lock connector. Catalog page

3 pin Edison (recessed)

3 pin Edison (proud)

Found on a majority of the 500 series scopes

2 pin (recessed)

Found on older, non-plugin scopes, such as the 514. Pin spacing is standard 1/2". Chassis cutout is 1.25", Chassis mount hole spacing is 1.5" Is the metal ring on the inside of the socket part of the ground connection, as found on some multi-phase twist-lock connectors?