FG504: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 30: | Line 30: | ||
fg504-8.jpg | Timer board | fg504-8.jpg | Timer board | ||
fg504-9.jpg | Circuit detail | fg504-9.jpg | Circuit detail | ||
Tek fg 504 95.jpg | |||
Tek fg 504 96.jpg | |||
Tek fg 504 97.jpg | |||
Tek fg 504 98.jpg | |||
</gallery> | </gallery> | ||
Revision as of 11:14, 6 May 2017
The Tektronix FG504 is a 40 MHz function generator plug-in for the TM500 system.
Key Specifications
| Frequency range | Sine, Triangle and Square - 0.001 Hz to 40 MHz; Ramps, Pulses or asymmetric waveforms - 0.001 Hz to 4 MHz |
|---|---|
| Duty Cycle | 7% to 93% |
| Output Amplitude | 30 Vp-p (OC), 15 Vp-p (50 Ω) |
| Output Attenuator | 0 to 50 dB in 10 dB steps |
| DC Offset | ±7.5 V (OC), ±3.75 V (50 Ω) |
| Distortion | ≤ 0.5% from 20 Hz to 40 kHz |
| Rise/Fall Time | 6 ns (fixed), 10 ns to 100 ms in 7 steps + variable control |
| Sweep | 1000:1 (500:1 on 106 mult.) |
| AM input | 10 Vp-p for 100% |
Pictures
-
FG504 front panel
-
FG504 in mainframe
-
FG504 without covers
-
Main board - output amplifier, attenuator, rise/fall time switch
-
Detail of output amplifier. Trimmer capacitors for high frequency compensation.
-
Detail of 50 Ω attenuator. Divider networks (under the ceramic chips) are switched in or bypassed by cam switches. The 0.3 amp output fuse can also be seen.
-
Ceramic 10 dB divider lifted to show resistor network. Laser trimming marks can be seen.
-
Function generator board that synthesizes the triangle and sine out of a square wave
-
Timer board
-
Circuit detail
-
-
-
-
