FG504
The Tektronix FG504 is a 40 MHz function generator plug-in for the TM500 system.
Key Specifications
| Frequency range | Sine, triangle and square – 0.001 Hz to 40 MHz; Ramps, pulses or asymmetric waveforms – 0.001 Hz to 4 MHz |
|---|---|
| Duty cycle | 7% to 93% |
| Output amplitude | 30 Vp-p (OC), 15 Vp-p (50 Ω) |
| Output attenuator | 0 to 50 dB in 10 dB steps |
| DC offset | ±7.5 V (OC), ±3.75 V (50 Ω) |
| Distortion | ≤ 0.5% from 20 Hz to 40 kHz |
| Rise/fall time | 6 ns (fixed), 10 ns to 100 ms in 7 steps + variable control |
| Sweep | 1000:1 (500:1 on 106 mult.) |
| AM input | 10 Vp-p for 100% |
Links
Documents referencing FG504
Patents that may apply to FG504
| Page | Title | Inventors | Filing date | Grant date | Links |
|---|---|---|---|---|---|
| Patent US 3562464A | Cam actuated switch having movable and fixed contacts on circuit board | Howard Vollum • Willem H Verhoef • Tony Sprando | 1968-10-07 | 1971-02-09 | Cam switches • 1501 • 214 • 2101 • 2701 • 2703 • 26G3 • 432 • 434 • 465 • 475 • 5A15N • 5A18N • 5A20N • 5A21N • 5A22N • 5A26N • 5A38 • 5A45 • 5A48 • 5B10N • 5B12N • 5B31 • 5B40 • 5B42 • 5B44 • 7A15 • 7A16A • 7A18 • 7A18A • 7A19 • 7A22 • 7A24 • 7A26 • 7B10 • 7B15 • 7B50 • 7B51 • 7B52 • 7B53A • 7B50A • 7B70 • 7B71 • 7B80 • 7B85 • 7B87 • 7B92 • 7B92A • 7D01 • 7D12 • 7D15 • 7J20 • 7S12 • 7T11 • 7T11A • AF501 • AM502 • AM503 • DC502 • DC503 • DC504 • DC505 • DM501 • DM502 • FG501 • FG501A • FG502 • FG503 • FG504 • FG507 • PG501 • PG502 • PG503 • PG505 • PG506 • PG506A • PG508 • TG501 • SC502 • SC503 • SC504 • SG505 • T912 • T921 • T922 • T922R • T932 • T935 |
Rear Interface
Right (as seen from the front, main board)
| Pin | Signal |
|---|---|
| 28A | Output (via 30 kΩ) |
| 27A | Output Common |
Left (mechanically floating interface board)
| Pin | Signal | Pin | Signal |
|---|---|---|---|
| 28B | Trig Output Common | 27A | nc |
| 27B | Trig Output | 27A | GND |
| 26B | Phase Lock Error Voltage | 26A | Sweep Reset Output |
| 25B | Trig/Gate Common | 25A | Linear Sweep Output |
| 24B | Trig/Gate Input | 24A | nc |
| 23B | nc | 23A | AM Input |
| 22B | VCF Input Common | 22A | Sweep Trigger Input |
| 21B | VCF Input | 21A | nc |
Internals
The FG504 takes ±33 V from the right slot to create a ±15 V supply, and the +11.5 V for a +5 V supply. It uses the 25 VAC windings, 17.5 VAC, and +11.5 V from the left slot for a ±25 V supply to the output amplifier. The regulators incorporate the mainframe pass transistors on both slots.
U770 is a 155-0032-00 below S/N B057720, a 155-0217-00 from B057720 on.
Pictures
External
Internal
-
FG504 left internal
-
FG504 right internal
-
FG504 without covers
-
Main board - output amplifier, attenuator, rise/fall time switch
-
Detail of output amplifier. Trimmer capacitors for high frequency compensation.
-
Detail of 50 Ω attenuator. Divider networks (under the ceramic chips) are switched in or bypassed by cam switches. The 0.3 A output fuse can also be seen.
-
Ceramic 10 dB divider lifted to show resistor network. Laser trimming marks can be seen.
-
Function generator board that synthesizes the triangle and sine out of a square wave
-
Timer board
-
Circuit detail
-
FG504 left internal
-
FG504 left internal upside down
-
FG504 right internal upside down
-
FG504 right internal
-
-
Operation
-
Sine out
-
Square out
-
Triangle out
Schematics and Locations
-
A1 (Main) board test point locations
-
A2 (Function) board test point locations
-
A3 (Loop) board Test point locations
